Sony Projector VPL-HW45 User Manual

							51
When the unit is set to convert 2D video images to 3D video images, some items on the menus 
may be not available to adjust/set, depending on the “3D Format” settings on the Function   
menu. The items that cannot be adjusted are not displayed on the menu. The following tables 
indicate these items.
z: Adjustable/can be set
–: Not adjustable/cannot be set
*1: The item is not available for Over-Under on 720/60p, or Over-Under on 1080/60p.
*2: The item is not available for 720/60p, or Over-Under on 1080/60p.
*3: For further details, refer to the tables in “Aspect Mode” (page 51).
Selectable items vary depending on the type of input signal or 3D format.
For details, see the tables below. Items that cannot be selected are not displayed in the menu.
2D
*1: Not displayed in the menu as fixed at Normal.
Item3D signals
Over-UnderSide-by-SideSimulated 3D
Reality Creation
zzz
Lamp Controlzzz
Motionflow*1zzz
NR – –z
MPEG NR – –z
Smooth Gradation – –z
Film Mode*2–zz
x.v.Colorzzz
Aspect*3zzz
Aspect Mode
Acceptable signals1920 × 1080
1280 × 720720 × 480
720 × 576Others
Preset memory number 
(page 47)7, 8, 10 to 145, 626, 32, 37, 45, 47, 50,  
55
Normalzzz*1
V Stretchzz–
Squeeze
zz–
Stretch –
z– 
						

							52
3D
Selectable items vary depending on the type of input signal or 3D format.
For details, see the tables below. Items that cannot be selected are not displayed in the menu.
2D
3D
Acceptable signals1920 × 1080, 1280 × 720
3D formatSide-by-SideOver-UnderFrame packingSimulated 3D
Preset memory number 
(page 47)7, 8, 10 to 1410 to 1418 to 20, 71, 72 7, 8, 10 to 14
Normalzzzz
V Stretchzzzz
Squeezezzzz
Stretch – – – –
Motionflow
Acceptable signals
1920 × 1080
1280 × 720
720 × 480
720 × 576
Others
Preset memory number (page 47)5 to 8, 10 to 1326, 32, 37, 45, 47, 50, 55
Impulsez–
Combination
z–
Smooth High
z–
Smooth Low
z–
True Cinema
z–
Acceptable 
signals1920 × 1080, 1280 × 720
3D formatFrame packingOver-UnderSide-by-SideSimulated 3D
Preset memory 
number (page 47)181920, 71, 
7210,1211,13147, 8, 10 to 147, 8, 10 to 14
Impulse –––––– – –
Combination –––––– – –
Smooth High – –
z––zz z
Smooth Low –zz–zz z z
True Cinema –––––– – – 
						

							53
Each adjustable/setting item is individually stored for each input connector. For further details, 
see the tables below.
Preset memory numbers for each input signal
Picture menu
Storage Conditions of Adjustable/Setting Items
InputPreset memory numbers
HDMI 1 (2D) 5 to 8, 10 to 14, 26, 32, 37, 45, 47, 50, 55
HDMI 2 (2D)
HDMI 1 (3D) 7, 8, 10 to 14, 18 to 20, 71, 72
HDMI 2 (3D)
ItemStorage conditions
Calib. Preset For each input connector
Reset For each input connector and Calib. Preset
Reality Creation
Contrast Enhancer
Lamp Control
Motionflow
Contrast
Brightness
Color
Hue
Color Temp.
  D93-D55
  Custom 5
    Gain R For each Color Temp., D93-D55 and Custom 5
    Gain G
    Gain B
    Bias R
    Bias G
    Bias B 
						

							54
Sharpness For each input connector and Calib. Preset
NR
MPEG NR
Smooth Gradation
Film Mode
Gamma Correction
Color Correction
Clear White
x.v.Color
Color Space
ItemStorage conditions 
						

							55
Projection Distance and Lens Shift Range
The projection distance refers to the distance between the front of the lens and the projected 
surface.
The lens shift range represents the distance in percent (%) by which the lens can be shifted from 
the center of the projected image. The lens shift range is regarded as 0% when the point A in 
the illustration (point where a line drawn from the center of the lens and the projected image 
cross at right angles) is aligned with the center of the projected image and full width or full 
height of the projected image is regarded as 100%.
VS +:  Vertical lens shift range (up) [%]
VS –:  Vertical lens shift range (down) [%]
HS +:  Horizontal lens shift range (right) [%]
HS –:  Horizontal lens shift range (left) [%]
Projection distance L
Projected imageFront of the lens
Lens shift range Projected image
Center of the lens 50%
50%Center of the 
projected image
Side of the unit ACenter of the lens
Projected image VS +
VS – HS – HS +
Shaded region: Lens shift range
Lens shift range Projected image
Center of the lens
50%
50%Center of the 
projected image
Top of the unit A 
						

							56
When projecting in 1.78:1 (16:9) format
Projection distance
Unit: m (inches)
Projection distance formula
D: Projected image size (Diagonal) Unit: m (inches)
Lens shift range
Projection image sizeProjection distance LDiagonalWidth × Height
80 (2.03 m) 1.77 × 1.00 (70 × 39) 2.40 – 3.83 (95 – 150)
100 (2.54 m) 2.21 × 1.25 (87 × 49) 3.00 – 4.79 (119 – 188)
120 (3.05 m) 2.66 × 1.49 (105 × 59) 3.61 – 5.76 (142 – 226)
150 (3.81 m) 3.32 × 1.87 (131 × 74) 4.52 – 7.20 (178 – 283)
200 (5.08 m) 4.43 ×2.49 (174 × 98) 6.04 – 9.61 (238 – 378)
Projection distance L (minimal length)Projection distance L (maximal length)
L = 0.030349 × D – 0.0354
(L = 1.194837 × D – 1.3915)L = 0.048191 × D – 0.0212
(L = 1.897302 × D – 0.8329)
1.78
1Video display area
Projection area
71%
71% 25% 25%
VS + = VS – = 71 – 2.840 × (HS + or HS –) [%]
HS + = HS – = 25 – 0.352 × (VS + or VS –) [%] 
						

							57
Dimensions
Front
Unit: mm (inches)
Bottom
Unit: mm (inches)
407.4 (16 1/8)
Center of the 
lens
203.7 (8 1/
8) 203.7 (8 1/8)
179.3 (7 
1/8)
172.7 (6 7/8)
93.5 (3 
3/4)
465.4 (18 3/8)
Front of the cabinet
113.7 (4 1/2) 150.6 (6)
120 (4 
3/4)
81.5 (3 
1/4) 120 (4 
3/4)
14.5 (19/32)
107.3 (4 
1/4)
115.9 (4 5/8)
81.5 (3 
1/4)
107.3 (4 1/4)
316.4 (12 1/2)
8 (11/32) 
						

							58
Attaching the PSS-H10 projector suspension support
Front view
Unit: mm (inches)
Side view
Unit: mm (inches)
The bottom surface of 
the mount bracket Ceiling
Center of the 
supporting pole
Center of the lens
150 (6)
75 (3)
175 (7)
93.5 (3 
3/4)
Front of the cabinet
182.8 (7 1/4) 130 (5 1/8)
227.8 (9)
463.9 (18 
3/8)236.1 (9 
3/8)
Center of the lens 
						

							59
Top view
Unit: mm (inches)
Center of the lens
227.8 (9) 182.8 (7 
1/4) 130 (5 1/8)
Upper ceiling mount bracket
Center of the supporting pole (The center of the 
supporting pole is different from that of the unit.) Front of the cabinet 
						

							60
NOTICES AND 
LICENCES
FOR SOFTWARE 
USED IN THIS 
PRODUCT
GPL/LGPL LICENSED SOFTWARE
The following GPL executables and LGPL libraries 
are used in this product and are subject to the GPL/
LGPL License Agreements included as part of this 
documentation:
Package list:
linux-kernel
alsa-lib
busybox
crypto
directfb
dosfstools
e2fsprogs
exceptionmonitor
fuse
gdisk
glib
glibc
iptables
libmicrohttpd
libnuma (in numactl)
procps
pump-autoip
XZ utils
Source code for these executables and libraries, as 
well as other executables and libraries, can be 
obtained using the following link:
http://oss.sony.net/Products/Linux/
===============================
GNU GENERAL PUBLIC LICENSE
Version 2, June 1991
Copyright (C) 1989, 1991 Free Software Foundation, 
Inc., 51 Franklin Street, Fifth Floor, Boston, MA 
02110-1301, USA. Everyone is permitted to copy and 
distribute verbatim copies of this license document, 
but changing it is not allowed.
Preamble
The licenses for most software are designed to take 
away your freedom to share and change it. By 
contrast, the GNU General Public License is intended 
to guarantee your freedom to share and change free 
software--to make sure the software is free for all its 
users. This General Public License applies to most of the Free Software Foundation’s software and to any 
other program whose authors commit to using it. 
(Some other Free Software Foundation software is 
covered by the GNU Library General Public License 
instead.) You can apply it to your programs, too.
When we speak of free software, we are referring to 
freedom, not price. Our General Public Licenses are 
designed to make sure that you have the freedom to 
distribute copies of free software (and charge for this 
service if you wish), that you receive source code or 
can get it if you want it, that you can change the 
software or use pieces of it in new free programs; and 
that you know you can do these things.
To protect your rights, we need to make restrictions 
that forbid anyone to deny you these rights or to ask 
you to surrender the rights. These restrictions 
translate to certain responsibilities for you if you 
distribute copies of the software, or if you modify it.
For example, if you distribute copies of such a 
program, whether gratis or for a fee, you must give 
the recipients all the rights that you have. You must 
make sure that they, too, receive or can get the source 
code. And you must show them these terms so they 
know their rights.
We protect your rights with two steps: (1) copyright 
the software, and (2) offer you this license which 
gives you legal permission to copy, distribute and/or 
modify the software.
Also, for each author’s protection and ours, we want 
to make certain that everyone understands that there 
is no warranty for this free software. If the software is 
modified by someone else and passed on, we want its 
recipients to know that what they have is not the 
original, so that any problems introduced by others 
will not reflect on the original authors’ reputations.
Finally, any free program is threatened constantly by 
software patents. We wish to avoid the danger that 
redistributors of a free program will individually 
obtain patent licenses, in effect making the program 
proprietary. To prevent this, we have made it clear that 
any patent must be licensed for everyone’s free use or 
not licensed at all.
The precise terms and conditions for copying, 
distribution and modification follow.
GNU GENERAL PUBLIC LICENSE TERMS 
AND CONDITIONS FOR COPYING, 
DISTRIBUTION AND MODIFICATION
0. This License applies to any program or other work 
which contains a notice placed by the copyright 
holder saying it may be distributed under the terms of 
this General Public License. The “Program”, below, 
refers to any such program or work, and a “work 
based on the Program” means either the Program or 
any derivative work under copyright law: that is to 
say, a work containing the Program or a portion of it, 
either verbatim or with modifications and/or 
translated into another language. (Hereinafter,