Home > Sony > Projector > Sony Projector Vpl Hs60 User Manual

Sony Projector Vpl Hs60 User Manual

    Download as PDF Print this page Share this page

    Have a look at the manual Sony Projector Vpl Hs60 User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 980 Sony manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    							51Specifications
    Others
    Specifications
    System
    Projection system3 LCD panels, 1 lens, projection system
    LCD panel 0.73-inch TFT LCD panel, 
    2,764,800 pixels (921,600 
    pixels u 3)
    Lens 1.6 times zoom lens (manual)  f21.3 – 34.1 mm/F2.4 – 3.16
    Lamp 135 W UHP type
    Projection picture size 40 to 200 inches (measured diagonally)
    Color system NTSC
    3.58/PAL/SECAM/NTSC4.43/
    PAL-M/PAL-N/PAL-60 
    system, switched automatically/
    manually (PAL-60 system not  
    switched manually)
    Acceptable video signals 15 kHz RGB/component 50/60 Hz, Progressive component 50/
    60 Hz, DTV (480/60i, 575/50i, 
    480/60p, 575/50p, 720/60p, 
    720/50p, 1080/60i, 1080/50i), 
    1080/24PsF, Composite video, 
    Y/C video
    Acceptable computer signals fH: 19 to 72 kHz 
    fV: 48 to 92 Hz
    Maximum resolution WXGA 1280  u 768, fV: 60 Hz
    Input
    Video input VIDEO: phono type
    Composite video: 1 Vp-p±2 dB sync negative (75 ohms 
    terminated)
    S VIDEO: Y/C mini DIN 4-pin 
    type 
    Y (luminance): 1 Vp-p±2 dB 
    sync negative (75 ohms 
    terminated)
    C (chrominance): burst 0.286 
    Vp-p ±2 dB (NTSC) 
    (75 ohms terminated)
    burst 0.3 Vp-p±2 dB (PAL) 
    (75 ohms terminated)
    Y/P
    B/CB/PR/CRComponent: phono type
         G with Sync/Y: 1 Vp-p±2dB  sync negative (75 ohms 
    terminated)     B/C
    B/PB: 0.7 Vp-p±2dB 
    positive (75 ohms terminated)
        R/C
    R/PR: 0.7 Vp-p±2 dB 
    positive (75 ohms terminated)
    HDMI Digital RGB/Y/C
    B(PB)CR(PR)
    INPUT A HD D-sub 15-pins Analog RGB/component:R/C
    R (PR): 0.7 Vp-p±2 dB
    (75 ohms terminated)
    G: 0.7 Vp-p±2 dB
    (75 ohms terminated) 
    G with sync/Y: 1 Vp-p±2 dB 
    sync negative (75 ohms 
    terminated) 
    B/C
    B (PB): 0.7 Vp-p±2 dB 
    (75 ohms terminated) 
    SYNC/HD: Composite sync 
    input: TTL level, positive/ 
    negative
    Horizontal sync input: TTL 
    level, positive/negative
    VD: Vertical sync input: TTL 
    level, positive/ negative
    Ethernet (VPL-HS51A only) RJ-4510BASE-T/100BASE-TX
    USB (VPL-HS51A only) Mini-B
    TRIGGER Minijack
    Power on: DC 12 V, output 
    impedance: 4.7 kilohms
    Power off: 0 V
    General
    Dimensions 348  u 135  u 360 mm
    (13 5/8u   5 7/8u  14 5/8 inches) (w/
    h/d)
    Mass VPL-HS60:  Approx. 5.6 kg (12 lb 6 oz) 
    VPL-HS51A:  Approx. 5.7 kg (12 lb 6 oz) 
    Power requirements AC 100 to 240 V, 0.8–1.95 A, 
    50/60 Hz
    Power consumption VPL-HS60:Max. 195 W 
    Standby mode: 3 W
    ECO mode: 0.5 W
    VPL-HS51A: Max. 195 W 
    Standby mode: 4.5 W
    ECO mode: 0.5 W 
    						
    							52Specifications
    Operating temperature
    0°C to 35°C (32°F to 95°F)
    Operating humidity 35% to 85% (no condensation)
    Storage temperature –20°C to 60°C (–4°F to 140°F)
    Storage humidity 10% to 90%
    Supplied accessories
    Remote control RM-PJHS50 (1)
    Size AA (R6) batteries (2)
    AC power cord (1)
    Air filter (for replacement) (1)
    Operating Instructions (1)
    CD-ROM (Application software) (VPL-HS51A only) (1)
    Design and specifications are subject to change 
    without notice.
    Safe regulations
    VPL-HS60:
    UL60950, CSA No. 950, FCC class B, IC class B, 
    EN60950 (NEMKO), CE, C-Tick
    VPL-HS51A:
    UL60950, FCC class B
    Optional accessories
    Projector Lamp LMP-H130 (for replacement)
    Air filter PK-HS10FL (for replacement)
    Projector Suspension Support PSS-610 
    						
    							53Specifications
    Others
    Warning on power connection
    Use a proper power cord for your local power supply.
    * Use a rated plug that complies with the regulation of each country and the specifications.
    Some of the items in the menus cannot be adjusted depending on the input 
    signal. The following tables indicate them.
    The items that cannot be adjusted are not displayed in the menu.
    Adjust Picture menu
    The United States, 
    Canada Continental Europe UK, Ireland, 
    Australia,  New 
    ZealandJapan
    Plug type VM0233 290B YP-12A COX-07 * YP332
    Female end VM0089 386A YC-13B COX-02 VM0310B YC-13
    Cord type SVT or  SJTSVT or 
    SJTH05VV-F H05VV-F N13237/CO-228 VCTF
    Rated Voltage 
    & Current 10A/
    125V10A/
    125V10A/250V 10A/250V 10A/250V 7A/125V
    Safety approval UL/CSA UL/CSA VDE VDE VDE
    DENANHO
    Input Signals and Adjustable/setting Items
    Item Input signal Video or S 
    video (Y/C) Component Video GBR Computer HDMI
    Contrast zz zzz
    Brightness zz zzz
    Color z
    (except for 
    B & W) zz
    –z
    Hue z 
    (NTSC3.58/
    NTSC4.43 
    only, except 
    for B & W)
    zz –z
    Sharpness zz z –z
    Black Level Adj zz z –z
    Gamma Correction zz zzz
    Color Temp. zz zzz 
    						
    							54Specifications
    z : Adjustable/can be set
    –  : Not adjustable/cannot be set
    Signal menu
    z  : Adjustable/can be set
    – : Not adjustable/cannot be set
    DDE
    zz
    (preset 
    memory 
    numbers 
    3,4,7,8,9 only)z(preset 
    memory 
    numbers 
    3,4,7,8,9 only)–z(preset 
    memory 
    numbers 
    3,4,7,8 only)
    Cinema 
    Black ProAdvanced 
    Iris zz zzz
    Lamp 
    Control zz zzz
    Item Input signal Video or S 
    video (Y/C) Component Video GBR Computer HDMI
    Dot Phase – – – z–
    H size – – – z–
    Shift – z
    (preset 
    memory 
    numbers 5, 6, 
    7, 8, 9, 10, 11 
    only) z
    (preset 
    memory 
    numbers 5, 6, 
    7, 8, 9, 10, 11 
    only) zz
    Wide Mode zz
    (preset 
    memory 
    numbers 3, 4, 
    5, 6 only) z
    (preset 
    memory 
    numbers 3, 4, 
    5, 6 only) –
    z
    (preset 
    memory 
    numbers 3, 4, 
    5, 6 only)
    Item Input signal
    Video or S 
    video (Y/C) Component Video GBR Computer HDMI 
    						
    							55Specifications
    Others
    Preset Signals
    Memory No.Preset signal fH (kHz) fV (Hz) Sync H Size HDMI  input
    1 VIDEO/60 60 Hz 15.734 59.940 – – –
    2 VIDEO/50 50 Hz 15.625 50.000 – – –
    3 480/60i 480/60i 15.734 59.940 SonG/Y or  composite sync–
    z
    4 575/50i 575/50i 15.625 50.000 SonG/Y or  composite sync/
    composite video–
    z
    5 480/60p 480/60p  (Progressive 
    NTSC)31.470 60.000 SonG/Y –
    z
    6 575/50p 575/50p  (Progressive 
    PA L )31.250 50.000 SonG/Y –
    z
    7 1080/60i 1035/60i,  1080/60i33.750 60.000 SonG/Y –
    z
    8 1080/50i 1080/50i 28.130 50.000 SonG/Y – z
    9 1080/24PsF 1080/48i 27.000 48.000 SonG/Y – –
    10 720/60p 720/60p 45.000 60.000 SonG/Y – z
    11 720/50p 720/50p 37.500 50.000 SonG/Y – z
    21 640  u 350 VGA-1 
    (VGA350) 31.469 70.086 H-pos, V-neg 800 –
    22 VESA 85  (VGA350)37.861 85.080 H-pos, V-neg 832 –
    23 640  u 400 NEC PC98 24.823 56.416 H-neg V-neg 848 –
    24 VGA-2  (TEXT)/
    VESA7031.469 70.086 H-neg V-pos 800 –
    25 VESA 85  (VGA400)37.861 85.080 H-neg, V-pos 832 –
    26 640  u 480 VESA 60 31.469 59.940 H-neg, V-neg 800 z
    27 Mac 13 35.000 66.667 H-neg, V-neg 864 –
    28 VESA 72 37.861 72.809 H-neg, V-neg 832 –
    29 VESA 75  (IBM M3)37.500 75.000 H-neg, V-neg 840 –
    30 VESA 85  (IBM M4)43.269 85.008 H-neg, V-neg 832 – 
    						
    							56Specifications
    When a signal other than the preset signals shown above is input, the picture may not 
    appear properly.
    31 800 
    u 600 VESA 56 35.156 56.250 H-pos, V-pos 1024 –
    32 VESA 60 37.879 60.317 H-pos, V-pos 1056 –
    33 VESA 72 48.077 72.188 H-pos, V-pos 1040 –
    34 VESA 75  (IBM M5)46.875 75.000 H-pos, V-pos 1056 –
    35 VESA 85 53.674 85.061 H-pos, V-pos 1048 –
    36 832  u 624 Mac 16 49.724 74.550 H-neg, V-neg 1152 –
    37 1024  u 768 VESA 60 48.363 60.004 H-neg, V-neg 1344 –
    38 VESA 70 56.476 70.069 H-neg, V-neg 1328 –
    39 VESA 75 60.023 75.029 H-pos, V-pos 1312 –
    55 1280  u 768 WXGA 60 47.776 59.870 H-neg, V-pos 1664 –
    56 1280  u 720 WXGA 60 44.772 59.855 H-neg, V-pos 1664 –
    Note
    Memory 
    No.Preset signal fH (kHz) fV (Hz) Sync H Size HDMI  input 
    						
    							57Ceiling Installation
    Others
    Ceiling Installation
    Use the PSS-610 Projector Suspension Support when you install the projector 
    on a ceiling. The projection distances for ceiling installation are shown below.
    When using the 16:9 aspect ratio screen
    Unit: mm (inches)
    To calculate the installation measurements (SS: Screen Size)
    a (minimum) = {(SS × 21.27/0.7227) – 35.160899} × 1.025 + 123.5
    a (maximum) = {(SS × 33.9409273/0.7227) – 37.678872} × 0.975 + 123.5
    x (minimum) = (SS/0.7227 × 4.5)
    x (maximum) = b + (SS/0.7227 × 9) + 75
    Screen Size 
    (inches) 40 60 80 100 120 150 180 200
    aMinimum  Distance
    1290
    (507/8) 1890(74 1/2)2500(981/2)3100(1221/8)3700(1453/4)4610(1815/8)5510(217)6120(241)
    Maximum
    Distance
    1910(75 1/4)2830(111 1/2)3750(147 3/4)4660(1831/2)5580(2193/4)6950(2733/4)8330(328)9240(3637/8)
    xMinimum  Distance 249
    (9 
    7/8)
    374
    (14 3/4)498
    (195/8)623
    (245/8) 747
    (291/2)934
    (367/8)1121
    (44 1/4)1245
    (491/8)
    Maximum
    Distance
    b+573
    (b+22 5/8) b+822
    (b+32 3/8) b+1071
    (b+42 1/4)b+1320
    (b+52) b+1569
    (b+61 7/8)b+1943
    (b+76 5/8)b+2316
    (b+91 1/4)b+2566(b+101 1/8)
    b 150, 175, 200, 250, 300 mm (6, 7, 7 7/8, 9 7/8, 10 7/8, 11 7/8 inches) adjustable 
    when using PSS-610
    a
    x b
    a: Distance between the screen and the front hole for the mount bracket on 
    the bottom surface of the unit
    b: Distance from the ceiling to the bottom surface of the unit
    x: Distance between the ceiling and the center of the screen (Distance that allows the whole picture being displayed on the screen)
    PSS-610 Projector Suspension 
    Support (not supplied)
    Ceiling
    Center of the 
    screen
    Center of the lens 
    						
    							58Ceiling Installation
    When using the 4:3 aspect ratio screen
    Unit: mm (inches)
    To calculate the installation measurements (SS: Screen Size)
    a (minimum) = {(SS × 21.27/0.5906) – 35.160899} × 1.025 + 123.5
    a (maximum) = {(SS × 33.9409273/0.5906) – 37.678872} × 0.975 + 123.5
    x (minimum) = (SS/0.5906 × 4.5)
    x (maximum) = b + (SS/0.5906 × 9) + 75
    Attaching the PSS-610 projector suspension support
    For details on installation on a ceiling, refer to the Installation manual for 
    Dealers of the PSS-610. Make sure to consult with a qualified Sony personnel 
    for installation.
    The installation measurements are shown below when installing the projector 
    on a ceiling.
    Top view
    Install the projector so that the center of the lens is parallel to the center of the 
    screen.
    Screen Size 
    (inches) 40 60 80 100 120 150 180 200
    a Minimum  Distance
    1560(61 1/2)2300(90 5/8)3040(119 3/4)3780(148 7/8)4510(177 5/8)5620(221 3/8)6730(265)7470(294 1/4)
    Maximum
    Distance
    2320(91 3/8)3450(135 7/8)4570(180)5690(224 1/8)6810(268 1/4)8490(334 3/8)10170(400 1/2)11290(444 5/8)
    x Minimum  Distance
    305(12 1/8)457(18)610(24 1/8)762(30)914(36)1143(45)1372(54 1/8)1524(60)
    Maximum
    Distance
    b+685
    (b+27) b+989
    (b+39)b+1294
    (b+51)b+1599
    (b+63)b+1904
    (b+75)b+2361
    (b+93)b+2818
    (b+111) b+3123
    (b+123)
    b 150, 175, 200, 250, 300 mm (6, 7, 7 7/8, 9 7/8, 10 7/8, 11 7/8 inches) adjustable 
    when using PSS-610
    216.5
    (8 5/8)
    152.5
    (6 1/8)
    14.4
    (19/32)
    224.5(8
     7/8)
    Front of the cabinet
    Center of the lens Upper ceiling 
    mount bracket
    Center of the supporting pole 
    (The center of the supporting pole 
    is different from that of the unit.)
    Distance between the screen 
    and the center of the lens
    Unit: mm (inches) 
    						
    							59Ceiling Installation
    Others
    Front view
    Side view
    125 (5)250 (9
     7/8)
    66 (2 5/8)
    75 (3)
    Ceiling
    The bottom 
    surface of the 
    mount bracket
    Center of the 
    supporting pole
    Center of the lens
    Distance between the ceiling and the surface of the mount bracket
    Using adjustment pipe (b): 150/175/200 mm (6 / 7 / 7 
    7/8 inches)
    Using adjustment pipe (c): 250/275/300 mm (9 7/8  / 10 7/8 / 11 7/8 inches)
    224.5
    (8 7/8)
    216.5
    (8
     5/8) 152.5
    (6 1/8)
    135.5 (5
     3/8) 14.4
     (19/32)
    Center of the lens
    Front of the cabinet Unit: mm (inches) 
    						
    							60Location of Controls
    Location of Controls
    You can use the buttons on the control panel with the same names as those on 
    the remote control to operate the projector.
    Front
    INPUTLAMP/
    COVER TEMP/
    FA N POWER
    SAVING ON/
    STANDBY
    MENU
    I/
    1  (on/standby) switch ( 1 page 18)
    INPUT button ( 1 page 24)
    MENU button ( 1 page 21)
    M /m /< /,  (arrow) 
    button ( 1 page 22) LAMP/COVER indicator  
    (
    1  page 46)
    TEMP/FAN Indicator 
    (1  page 46)
    POWER SAVING 
    indicator ( 1 page 40)
    ON/STANDBY 
    indicator ( 1 page 17)
    Zoom ring ( 1 page 20)
    Focus ring (
    1 page 20)
    Ventilation holes 
    (exhaust) 
    (1  page 9)
    LENS SHIFT dials 
    (1  page 18)
    Remote control 
    detector ( 1 page 17)
    VPL-HS51A
    Remote control 
    detector ( 1 page 17)
    Ethernet connector
    Connects to a computer 
    with the LAN cable.
    VPL-HS60 
    						
    All Sony manuals Comments (0)

    Related Manuals for Sony Projector Vpl Hs60 User Manual