Sony Projector Vpl Fx50 User Manual

25 (GB)
Note
When you exit the Image Viewer window by clicking
the END or HOME button, the files listed in the
Temporary File will be automatically erased. To store
the files, add them to the projector using the File
Manager function.
For details, see “Using File Manager” on page 26 (GB).
Running a presentation using an image
file stored in the projector
1Click the IMAGE VIEWER icon in the
Application Select window.
The Look In window appears.
2Click PROJECTOR.
The Image Viewer of the projector starts,...

26 (GB)
Operations from a Computer
About the window displayed while the
Image Viewer is running
The same window as that in “About the window
displayed while the Image Viewer is running” on page
24 appears.
The NEXT button on the .SHO file select window is to
advance to the next slide immediately during the slide
show. The PREVIOUS button is to go back to the
previous slide.
Using File Manager
You can manage the files stored in the projector from a
computer by a simple operation. The File Manager
function...

27 (GB)
Controlling the Projector from a
Computer
You can perform various adjustments and settings of
the projector on a computer’s display. Three control
windows are available; GENERAL, PICTURE CTRL
and SETTINGS windows, each with different
functions.
The functions of the buttons in the windows are the
same as those on the Remote Commander supplied
with the projector.
For details on the buttons, see the Operating Instructions of
the projector.
The illustrations shown in the steps below are for the...

28 (GB)
Operations from a Computer
SETTINGS window
x For VPL-PX15
The ASPECT (4:3, 16:9) and STATUS (ON, OFF)
buttons function the same as the settings in the
menu.
x For VPL-FX50
The ASPECT (4:3, 16:9) and LAMP MODE
(STANDARD, LOW) buttons function the
same as the settings in the menus.
For details, see the Operating Instructions of the
projector.
3Click the button to adjust or set.
Checking the Indicators on the
Projector
You can check the present status of the indicators on
the control panel of the...

29 (GB)
Operations from the Projector
Preparations
Before starting
x For VPL-PX15 and VPL-FX50
• Confirm that INPUT-B FUNC. (VPL-PX15) or
INPUT-C FUNC. (VPL-FX50) in the INSTALL
SETTING menu is set to ON.
• Switch the PJ/NETWORK select switch to
NETWORK.
x For VPL-FE110U/M
• Confirm that the INPUT C/RS-232C/RS-422A select
switch on the rear of the projector is set to INPUT C.
• To operate the projector, use the RM-PJM610 remote
commander or mouse and keyboard (not supplied).
Connect the mouse and...

30 (GB)
Operations from the Projector
Menu Command Function
File
View
View Show
Opens files stored in the
projector.
Opens the recently used files
which are shown in the
submenu.
Closes the currently displayed
file.
Indicates version information
on the program.
Shows a slide in Slide View
mode.
Shows a slide in Note View
mode.
Runs a slide show.
Runs a slide show.
Sets up the slide show. Open
Recent Files
Close
Version
Slide View
Note View
Slide Show
Run
Set Up Show
x For VPL-PX15 and VPL-FX50
• When the...

31 (GB)
Running a presentation
Using a file stored in a computer connected to
the LAN
1Double-click the My Projector icon in the Network
Projector window.
2Enter “\ xxxx (name of a computer you want to
access)” in the address column, then click the
Enter button.
The shared folders for the computer are displayed.
Note
You have to set the items for Identification in the
Network Configuration dialog box (page 9 (GB)),
and have to set share files with a computer you
want to access.
3Select the folder which...

32 (GB)
Operations from the Projector
1Name box
Identifies the currently selected cell.
2Menu bar
3Sheet tabs
Displays the names of sheets. Click the sheet tab to
make a sheet active.
4Zoom box
Click 
 to select the magnification to reduce or
enlarge the display of an active worksheet.
5Cell contents bar
Displays the result or constant value of the active cell.
6
 (Help) button
Displays the Help topic for the Worksheet Viewer.
7
/ buttons
Use to scroll through the sheet tabs. Click an arrow of
the...

33 (GB)
Running a Slide Show Using the
Image Viewer
You can display thumbnail images of the files stored in
the projector or a memory card installed in the
projector, then run a slide show by selecting the
images you want.
When you start the Image Viewer of the projector and
select the folder which contains the files you want, the
main window opens.
About the main window of the Image
Viewer
7483512
9
6
1 (Help) button
Click to display the Help topic for the Image Viewer.
2Slide
Clicking a slide displays...

34 (GB)
Operations from the Projector
3  Select a slide you want to display by clicking a
thumbnail slide.
The green frame appears on the selected slide.
4  Right-click the slide to select Full Screen, click
Full Screen from the View menu, or click the 
button on the tool bar.
The slide is displayed to fit the projector screen.
Running a slide show
1Follow steps 1 and 2 in “Displaying a full-screen
image.”
2Select slides you want to use for your slide show.
• Check the Slide Show check box on each slide...