Sony Projector VPL-FH500L VPL-FX500L User Manual

11Connecting the Projector
Preparation
To attach the HDMI cable
Fix the cable to the cable tie holder at the bottom of the projector, using a commercially 
available cable tie, as in the illustration.
Use a cable tie of less than 1.9 mm × 3.8 mm in thickness.
OUTPUT
Projected images can be output to display equipment such as a monitor.
This connector outputs the image. Output as a computer signal input from the RGB input connector 
(INPUT A, INPUT B) or a video signal input from the YP
BPR input...

12Projecting an Image
BProjecting/Adjusting an Image
Projecting an Image
The size of a projected image depends on the distance between the projector and screen. Install 
the projector so that the projected image fits the screen size. For details on projection distances 
and projected image sizes, see 
“Projection Distance and Lens Shift Range” (page 54).
1Plug the AC power cord into a wall 
outlet.
2Connect all equipment to the projector 
(page 8).
3Turn on the projector.
Press the ?/1 key on the...

13Projecting an Image
Projecting/Adjusting an Image
Adjusting the Focus, Size, and Position of the Projected image
Focus Size (Zoom) Position (Lens shift)
When attaching the Electric 
focus lens
Press the FOCUS key on the 
projector or the Remote 
Commander then press the B/
bkey (or V/v key) to adjust 
the focus.
When attaching the Manual 
focus lens
Turn the Focus Ring to adjust 
the focus.When attaching the Electric 
zoom lens
Press the ZOOM key on the 
projector or the Remote 
Commander then press...

14Projecting an Image
Adjusting the tilt of the projector 
with the adjusters
When the projector is installed on an uneven 
surface, you can adjust using the adjusters. 
To correct any trapezoidal distortion of the 
projected image, use the Keystone feature 
(page 5, 
26).
And you can also broaden the adjustment 
range by removing the nuts from the 
adjuster.
 Be careful not to let the projector down on 
your fingers.
 Do not push hard on the top of the projector 
with the adjuster extended. It may cause...

15Using a MENU
Adjustments and Settings Using a Menu
BAdjustments and Settings Using a Menu
Using a MENU
The menu displays used for the explanation below may be different depending on the model you are 
using.
1Press the MENU key to display the 
menu.
2Select the setting menu. 
Use the V or v key to select the setting 
menu then press b or ENTER key.
3Select the setting item.
Use the V or v key to select the setting 
menu then press b or ENTER 
key.
To return to the selection screen of the 
setting menu,...

16The Picture Menu
The Picture Menu
For adjusting the picture for each input signal.
*1: When a computer signal is input, this option is available.
*2: When a video signal is input, this option is available.
*3: When “Picture Mode” is set to the item other than “Presentation,” this option is available.
*4: When a B & W signal is input, this option is not available.
*5: When an analog TV signal is input, this option may not available, depending on the color system.
*6: When a video signal is input, this...

17The Picture Menu
Adjustments and Settings Using a Menu
*7: When a progressive signal is input, this option is not available.
*8: Available when a computer signal is input from the DVI-D input connector (INPUT C) and 
HDMI input connector (INPUT D). This projector is not to be used as a device for medical 
diagnosis (VPL-FH500L). 

18The Screen Menu
The Screen Menu
For adjusting the size, position, and aspect ratio of the projected image for each input signal.
*1:  Note that if the projector is used for profit or for public viewing, modifying the original picture 
by switching to the aspect mode may constitute an infringement of the rights of authors or 
producers, which are legally protected.
 Depending on the input signal, setting items for aspect ratio or some other setting items cannot 
be set in some cases, or changing the...

19The Screen Menu
Adjustments and Settings Using a Menu
*3: Available when a video signal is input from the YPBPR input connector (INPUT A), DVI-D input 
connector, HDMI input connector, and optional adapter.
*4: Available when a computer signal is input from the RGB input connector (INPUT A, INPUT B).
*5: If the projected image includes large amount of black portion around it, the APA function will 
not work properly and a part of the image may not be displayed on the screen and also optimum 
image...

20The Screen Menu
Aspect
VPL-FH500L
*1: If you select “Normal,” the image is 
projected in the same resolution as the 
input signal without changing the aspect 
ratio of the original image.
*2: If you select “Full2,” the image is projected 
to fit the projected image size, regardless 
of the aspect ratio of the image.
*3: Depending on the input signal, the 
projected image may be projected as 
illustrated below. In this a case, select 
“16:9.”
*4: Depending on the input signal, the image 
may be...