Sony Projector VPL-FH36 User Manual

21The Picture Menu
Adjustments and Settings Using a Menu
*5: When an analog TV signal is input, this option may not available, depending on the color system.
*6: When a video signal is input, this option is available (VPL-FX37/FX35/FX30).
*7: When a progressive signal is input, this option is not available.
*8: Available when a computer signal is input from the DVI-D input connector (INPUT C) and 
HDMI input connector (INPUT D). This projector is not to be used as a device for medical 
diagnosis...

22The Screen Menu
The Screen Menu
For adjusting the size, position, and aspect ratio of the projected image for each input signal.
*1:  Note that if the projector is used for profit or for public viewing, modifying the original picture 
by switching to the aspect mode may constitute an infringement of the rights of authors or 
producers, which are legally protected.
 Depending on the input signal, setting items for aspect ratio or some other setting items cannot 
be set in some cases, or changing the...

23The Screen Menu
Adjustments and Settings Using a Menu
*3: Available when a video signal is input from the YPBPR input connector (INPUT A), DVI-D input 
connector, and HDMI input connector.
*4: Available when a computer signal is input from the RGB input connector (INPUT A, INPUT B).
*5: If the projected image includes large amount of black portion around it, the APA function will 
not work properly and a part of the image may not be displayed on the screen and also optimum 
image cannot be obtained,...

24The Screen Menu
Aspect
VPL-FH36/FH35/FH31/FH30
*1: If you select “Normal,” the image is 
projected in the same resolution as the 
input signal without changing the aspect 
ratio of the original image.
*2: If you select “Full2,” the image is projected 
to fit the projected image size, regardless 
of the aspect ratio of the image.
*3: Depending on the input signal, the 
projected image may be projected as 
illustrated below. In this a case, select 
“16:9.”
*4: Depending on the input signal, the image...

25The Screen Menu
Adjustments and Settings Using a Menu
VPL-FX37/FX35/FX30
*1:  If you select “Normal,” the image is 
projected in the same resolution as the 
input signal without changing the aspect 
ratio of the original image.
*2: If you select “Full2,” the image is projected 
to fit the projected image size, regardless 
of the aspect ratio of the image.
*3: Depending on the input signal, the 
projected image may be projected as 
illustrated below. In this a case, select 
“16:9.”
*4: Depending on the...

26The Function Menu
The Function Menu
The Function menu is used for setting various functions of the projector.
*1: Executes APA when a computer signal is input via the RGB input connector (INPUT A, INPUT 
B).
*2: When using the Twin Picture display mode and there is no input signal, the background will be 
black if you set this item to “Image” (VPL-FH36/FH35/FH31/FH30). Setting items Description
Audio Output Vol. The higher the setting, the higher an audio level output from the audio 
output connector....

27The Operation Menu
Adjustments and Settings Using a Menu
The Operation Menu
The Operation Menu is used for setting for the operations by using the menu or the Remote 
Commander.
*1: Available for VPL-FH36/FH35/FH31/FH30 only
*2: You will not be able to use the projector if you forget your password. If you call qualified Sony 
personnel because you have forgotten the password, you will be asked to verify the projector’s 
serial number and your identity. (This process may differ in other...

28The Connection/Power Menu
The Connection/Power Menu
The Connection/Power menu is used for setting for the connections and power.
*1: The image may not be adjusted properly depending on the type of input signal. In such a case, 
adjust it manually to suit to the connected equipment.
*2: When “Standby Mode” is set to “Low,” the network and network control function cannot be 
operated while the projector is in standby mode. Setting items Description
Network Setting
IP Address SetupAu to  ( D H C P ): The...

29The Installation Menu
Adjustments and Settings Using a Menu
The Installation Menu
The Installation menu is used for installing the projector.
VPL-FH35/FH30/VPL-FX37/FX35/FX30
*1: Do not use the projector at an altitude of 2,700 m or higher.
*2: Available for VPL-FH35/FH30 only
*3: Depending on the position adjusted with the lens shift feature, the aspect ratio of the image may 
change from the original or projected image may be distorted with Keystone adjustment.
*4: Since the Keystone adjustment is an...

30The Installation Menu
VPL-FH36/FH31
Setting items Description
Edge BlendingOn/Off: When set to “On,” the Edge Blending function is enabled. Set to 
“Off” when you do not project using multiple projectors.
Blending 
RangeSets the edge blending width.
After selecting the blending position, a marker will be displayed.
To p : Adjusts the top width of the screen.
Bottom: Adjusts the bottom width of the screen.
Left: Adjusts the left width of the screen.
Right: Adjusts the right width of the screen.
Zone...