Sony Projector VPL-CX275 User Manual
Have a look at the manual Sony Projector VPL-CX275 User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 980 Sony manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
41Specifications Others INPUT OUTPUT (Computer/video)INPUT ARGB/YPBPR input connector: Mini D-sub 15 pin female, G with sync/Y: 1 Vp-p ± 2 dB, sync negative, 75 ohms terminated, RGB/P BPR: 0.7 Vp-p ± 2 dB, 75 ohms terminated, Sync signal: TTL level high impedance, positive/negative Audio input connector: Stereo mini jack, rated input 500 mVrms, input impedance more than 47 kohms INPUT B RGB input connector: Mini D-sub 15-pin female, RGB: 0.7 Vp-p ± 2 dB, 75 ohms terminated, Sync signal: TTL level high impedance, positive/negative Audio input connector: Stereo mini jack, rated input 500 mVrms, input impedance more than 47 kohms INPUT CHDMI input connector: HDMI 19-pin, HDCP support, Audio input connector: HDMI audio support S VIDEO INS video input connector: Mini DIN 4-pin, Y: 1 Vp-p ± 2 dB, sync negative, 75 ohmes terminated, C: (burst signal) 0.286 (NTSC)/0.3 (PAL/SECAM) Vp-p ± 2 dB, 75 ohms terminated Audio input connector: Phono jack × 2, rated input 500 mVrms, Input impedance more than 47 kohms VIDEO INVideo input connector: Phono jack, 1 Vp-p ± 2 dB, sync negative, 75 ohmes terminated Audio input connector: Shared with S VIDEO IN OUTPUTMONITOR output connector: Mini D-sub 15-pin female, G with sync/Y: 1 Vp-p ± 2 dB, sync negative, 75 ohms terminated, RGB/P BPR: 0.7 Vp-p ± 2 dB, 75 ohms terminated, Sync signal: HD, VD 4 V (open), 1 Vp-p (75 ohms), positive/negative Audio output connector: Stereo mini jack, stereo, 1 Vrms (maximum volume, when inputting 500 mVrms), output impedance 5 kohms Others connectorRS-232C connector: D-Sub 9 pin female LAN connector: RJ45, 10BASE-T/100BASE-TX Operating temperature/ Operating humidity0 °C to 40 °C (32 °F to 104 °F)/20% to 80% (no condensation) Storage temperature/ Storage humidity–10 °C to +60 °C (14 °F to 140 °F)/ 20% to 80% (no condensation) Power requirements100 V to 240 V AC, 3.9 A-1.7 A, 50/60 Hz Power consumptionVPL-CX275: 100 V AC: 390 W 240 V AC: 367 W VPL-CW275: 100 V AC: 396 W 240 V AC: 373 W ItemDescription ModelVPL-CX275/VPL-CW275
42Specifications *1: For details, refer to “Acceptable Input Signals” on page 44. *2: Information on accessories in this manual is current as of October 2012. Design and specifications of the unit, including the optional accessories, are subject to change without notice.Standby power100 V AC: 3 W (when “Standby Mode” is set to “Standard”)/0.5 W (when “Standby Mode” is set to “Low”) 240 V AC: 3 W (when “Standby Mode” is set to “Standard”)/0.5 W (when “Standby Mode” is set to “Low”) Heat dissipation VPL-CX275: 100 V AC: 1331 BTU 240 V AC: 1253 BTU VPL-CW275: 100 V AC: 1352 BTU 240 V AC: 1273 BTU Standard dimensions (W/H/D)Approx. 406 × 122.3 × 330.5 mm (15 31/32 × 413/16 × 13 inches) Approx. 406 × 113 × 330.5 mm (15 31/32 × 47/16 × 13 inches) (without projecting parts) Mass Approx. 5.6 kg (12 lb 5 1/2 oz) Supplied accessoriesSee “Checking the Supplied Accessories” in the supplied Quick Reference Manual. Optional accessories *2Projector Lamp LMP-C280 (for replacement) ItemDescription ModelVPL-CX275/VPL-CW275 Notes Always verify that the unit is operating properly before use. SONY WILL NOT BE LIABLE FOR DAMAGES OF ANY KIND INCLUDING, BUT NOT LIMITED TO, COMPENSATION OR REIMBURSEMENT ON ACCOUNT OF THE LOSS OF PRESENT OR PROSPECTIVE PROFITS DUE TO FAILURE OF THIS UNIT, EITHER DURING THE WARRANTY PERIOD OR AFTER EXPIRATION OF THE WARRANTY, OR FOR ANY OTHER REASON WHATSOEVER.
43Specifications Others Pin assignment RGB input connector (Mini D-sub 15-pin, female) RS-232C connector (D-Sub 9-pin, female) 1 Video input (red) R9 Power supply input for DDC 2 Video input (green) G10 GND 3 Video input (blue) B11 GND 4 GND 12 DDC/SDA 5 RESERVE 13 Horizontal sync signal 6 GND (R) 14 Vertical sync signal 7 GND (G) 15 DDC/SCL 8 GND (B) 1NC 6NC 2RXDA 7RTS 3TXDA 8CTS 4DTR 9NC 5 GND 51 9 6
44Specifications Acceptable Input Signals Computer signal Digital TV signal Analog TV signal When a signal other than the signals listed in table is input, the picture may not be displayed properly. An input signal meant for screen resolution different from that of the panel will not be displayed in its original resolution. Text and lines may be uneven. ResolutionfH [kHz]/ fV [Hz]Input connector RGBHDMI 640 × 350 31.5/70 z 37.9/85z 640 × 400 24.8/56z 31.5/70z 37.9/85z 640 × 480 31.5/60zz 35.0/67z 37.9/73z 37.5/75z 43.3/85z 800 × 600 35.2/56z 37.9/60zz 48.1/72z 46.9/75z 53.7/85z 832 × 624 49.7/75z 1024 × 768 48.4/60zz 56.5/70z 60.0/75z 68.7/85z 1152 × 864 64.0/70z 67.5/75z 77.5/85z 1152 × 900 61.8/66z 1280 × 960 60.0/60zz 75.0/75z 1280 × 1024 64.0/60zz 80.0/75z 91.1/85z 1400 × 1050 65.3/60zz 1280 × 768 47.8/60zz 1280 × 720 44.8/60zz 1366 × 768 47.7/60zz 1440 × 900 55.9/60zz 1280 × 800 49.7/60zz 1600 × 1200 75/60z 1920 × 1200 74.0/59.95z SignalfV [Hz] Input connector RGB/ YPBPRHDMI 480i 60 zz 576i 50zz 480p 60zz 576p 50zz 1080i 60zz 1080i 50zz 720p 60zz 720p 50zz SignalfV [Hz] Input connector VIDEO / S VIDEO NTSC 60 z PA L / S E C A M 5 0z Notes ResolutionfH [kHz]/ fV [Hz]Input connector RGBHDMI
45Projection Distance and Lens Shift Range Others Projection Distance and Lens Shift Range The following describes the projection distance and height from lens center to bottom of screen by each projected screen size. The projection distance is the distance between the front of the lens and the surface of the projected image. Height H is the height from the bottom of the projected image (top for ceiling mount) to A (determined by drawing a perpendicular line from lens center to projected image surface). For this unit, the same projection distance calculations apply to both floor and ceiling installation. Never mount the projector on the ceiling or move it by yourself. Be sure to consult with qualified Sony personnel (charged). Floor Installation/Ceiling Installation (Top side parallel to ceiling) Caution Projection distance L Projected imageFront of the lens A Height H from lens center to bottom of screen Front of the lens Height H from lens center to top of screen A Projected image Projection distance LTop side
46Projection Distance and Lens Shift Range The lens shift range represents the distance in percent (%) by which the lens can be shifted from the initial position of the projected image, with full width or full height of the projected image regarded as 100%. VS UP: Vertical lens shift range (up) [%] VSDN: Vertical lens shift range (down) [%] HS R: Horizontal lens shift range (right) [%] HSL: Horizontal lens shift range (left) [%] Projection distance/Projection distance formula Projection distance (VPL-CX275) Unit: m (inches) Projection distance formula (VPL-CX275) D: Projected image size (Diagonal) H: Distance between the bottom edge of the image and the center of the lens Center of the image Projected image VSUP VSDN HSLHSR Shaded region: Lens shift range Projected image Center of the projected imageLens shift range Center of the lens Side of the projector 50% 50% Projected image Center of the projected imageLens shift range Center of the lens Top of the projector 50% 50% Projected image sizeProjection Distance LHeight H from lens center to bottom of screen Diagonal DWidth × Height 80 inch (2.03 m) 1.63 × 1.22 (64 × 48) 2.12 – 3.10 (84 – 122)–0.13 (–5) 100 inch (2.54 m) 2.03 × 1.52 (80 × 60) 2.66 – 3.88 (105 – 153)–0.17 (–7) 120 inch (3.05 m) 2.44 × 1.83 (96 × 72) 3.20 – 4.67 (126 – 184)–0.20 (–8) 150 inch (3.81 m) 3.05 × 2.29 (120 × 90) 4.01 – 5.85 (158 – 230)–0.25 (–10) 200 inch (5.08 m) 4.06 × 3.05 (160 × 120) 5.36 – 7.82 (211 – 308)–0.33 (–13)
47Projection Distance and Lens Shift Range Others Expression#1 Unit: m (inches) Expression#2 Projection distance (VPL-CW275) Unit: m (inches) Projection distance formula (VPL-CW275) D: Projected image size (Diagonal) H: Distance between the bottom edge of the image and the center of the lens Expression#1 Unit: m (inches) Expression#2 Projection Distance L (min.)Projection Distance L (max.) L=0.027010 × D – 0.0490 (L=1.063369 × D – 1.9300)L=0.039363 × D – 0.0482 (L=1.549709 × D – 1.8982) Height H from lens center to bottom of screen H=-0.00165 × D+0.00000 (H=-0.06502 × D+0.00000) Projected image sizeThrow Distance LHeight H from lens center to bottom of screen Diagonal DWidth × Height 80 inch (2.03 m) 1.72 × 1.08 (68 × 43) 2.22 – 3.25 (88 – 128) 0.00 (0) 100 inch (2.54 m) 2.15 × 1.35 (85 × 53) 2.79 – 4.08 (110 – 160) 0.00 (0) 120 inch (3.05 m) 2.58 × 1.62 (102 × 64) 3.36 – 4.91 (133 – 193) 0.00 (0) 150 inch (3.81 m) 3.23 × 2.02 (127 × 79) 4.21 – 6.15 (166 – 242) 0.00 (0) 200 inch (5.08 m) 4.31 × 2.69 (170 × 106) 5.63 – 8.21 (222 – 323) 0.00 (0) Projection Distance L (min.)Projection Distance L (max.) L=0.028357 × D – 0.0490 (L=1.116434 × D – 1.9300)L=0.041327 × D – 0.0482 (L=1.627044 × D – 1.8982) Height H from lens center to bottom of screen H=0.00000 × D+0.00000 (H=0.00000 × D+0.00000)
48Projection Distance and Lens Shift Range Lens shift range VSUP=VSDN=3.3[%] HSR=HSL=2.5[%]5.0% VPL-CX275 VPL-CW275 5.0% 3.0% 3.0% 3.3% 3.3% 2.5% 2.5% VS UP=VSDN=5.0[%] HSR=HSL=3.0[%]
49Dimensions Others Dimensions 406.0 (15 31/32) Center of the lens Front Unit: mm (inches) 104.5 (4 1/8) 63.0 (2 15/32) Side Unit: mm (inches) 330.5 (13) 113.0 (4 7/16) 122.3 (4 13/16)
50Dimensions Unit: mm (inches) Bottom Center of the lensEdge of the lens 368.0 (14 1/2)19.0 ( 3/4) 45.3 (1 25/32)4.7 ( 3/16) 104.5 (4 1/8) 138.5 (5 7/16) 278.5 (10 31/32) 46.1 (1 13/16) 13.9 (9/16) 102.7 (4 1/32) 18.4 ( 23/32) 88.4 (3 15/32) 36.5 (1 7/16) 203.1 (8) 199.5 (7 27/32) 23 ( 29/32)