Sony Projector VPL-CH375 User Manual

41Using Network Features
Network
Set the WLAN network function on the 
Setup page.
Entered values will not be applied unless 
you click on [Apply].
To use the wireless LAN network, a USB 
wireless LAN module IFU-WLM3 (not 
supplied) is necessary.
1Click the [WLAN Setting] to open the 
WLAN Setting page.
2Enable or disable the radio wave 
output of USB wireless LAN module.
Wireless ON: Enables radio wave 
output of USB wireless LAN module.
Wireless OFF: Disables radio wave 
output of USB wireless LAN...

42Using Network Features
Key: Input the password for security 
method of the access point according 
to the selected encryption type as 
below;
(b) Input the settings for Client 
Mode.
When the USB wireless LAN module is 
activated as a client, set the items for the 
client (set the items for the access point 
the projector tries to connect to).
Connection Status: Displays the 
connecting status between the access 
point and projector.
ESSID: Input the ESSID of access point 
the projector tries to...

43Using Network Features
Network
-Subnet Mask: Input the subnet mask of 
the projector.
-Default Gateway: Input the default 
gateway of the projector.
-Primary DNS: Input the primary DNS 
server of the projector.
-Secondary DNS: Input the secondary 
DNS server of the projector.
MAC Address: Displays the MAC 
address for USB wireless LAN 
module.
Change the label names for the input 
connectors that will be displayed on the 
projected screen on the Setup page. The 
entered label names will not be applied...

44Using Network Features
Change the settings for the control protocol 
on the Setup page. Entered values will not be 
applied unless you click on [Apply].
1Click on [Advanced Menu] to display 
the buttons for more settings.
2(a)Set Advertisement.
Start Advertisement Service: 
Set Advertisement to enabled or 
disabled. Items for Advertisement are 
enabled only when this function is 
enabled. The function is disabled at the 
factory default.-Community: 
Input the community name for 
Advertisement and PJ...

45Using Network Features
Network
-Community:
Input the community name of 
Advertisement and PJ Talk. If the 
community name for PJ Talk is changed, 
the one for Advertisement will also be 
changed. Only four alphanumeric 
characters can be input. The factory 
default setting is “SONY.” It is 
recommended that the community name 
be changed from the factory setting to 
avoid unnecessary access to the 
projector from other computers.
-Port No.:
Input the server port of PJ Talk. The 
factory default setting...

46Using Network Features
(e)Reset the network settings.
Reset:
Reset all Web browser settings to their 
factory defaults.
Reset button Reset 

47Using Presentation Function via Network
Presentation Function via Network
BPresentation Function via Network
Using Presentation Function via Network
The Presentation Function via Network enables you to do the following:
 Connect a maximum of eight computers to the projector.
 Project images from a maximum of four computers simultaneously.
 Connecting a USB wireless LAN module (not supplied) to the projector as an access point, 
allows the projector to connect to up to seven computers simultaneously....

48Using Presentation Function via Network
3Start Projector Station for Network 
Presentation.
For Windows:
Select [Start]-[All Programs]-[Projector 
Station for Network Presentation] on the 
computer.
For Mac:
Double-click [Projector Station for 
Network Presentation] in Applications 
folder.
After starting Projector Station for Network 
Presentation, the connection method 
selection window appears. 
1Select the connection method.
Select “Network connection” or “Wireless direct connection” depending 
on...

49Using Presentation Function via Network
Presentation Function via Network
b)  Wireless direct connection
Select or directory input the SSID of the 
projector that the computer is connected 
to. If the 
“WLAN settings” is set to “Access Pt.(Auto)” and “Auto” has been 
checked, you can skip inputting the 
wireless password.
3Click “Connect”.
If other users are projecting an image, 
the controller appears on the screen. 
Click the   to start projecting an 
image (page 49).
If no users are projecting an...

50Using Presentation Function via Network
You can project JPEG images, PDF files, etc. 
stored in a tablet PC/smartphone wirelessly 
by using a specific application.
*1
For downloading*2 or detailed method of 
using the application, access the following 
URL.
http://PWPresenter.pixelworks.com
*1: To use the application, one of the following 
conditions is required.
 Connected to network where wireless 
connection can be established (page 10).
 Connected to a wireless network via USB 
wireless LAN module...