Sony Projector VPL-CH355 User Manual
Have a look at the manual Sony Projector VPL-CH355 User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 980 Sony manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
61Specifications Others Specifications ItemsDescriptions ModelVPL-CH375/CH370/CH355/CH350 Projection system 3 LCD system Display device Effective display size0.64-inch (16.3 mm), 3 plate, Aspect ratio 16:10 Effective picture elements6,912,000 pixels (1920 × 1200 pixels, 3 plate panels) Projection lens Focus Manual Zoom Manual Light source VPL-CH375/CH370: 280 W VPL-CH355/CH350: 250 W Projected image size40 inches to 300 inches (1.02 m to 7.62 m) Luminous flux (Brightness)VPL-CH375/CH370: 5000 lm VPL-CH355/CH350: 4000 lm (when “Lamp Mode” is set to “High”) Speaker 12 W × 1 (monaural) Applicable scanning frequency *1 Horizontal: 19 kHz to 92 kHz, Vertical: 48 Hz to 92 Hz Resolution When a computer signal is inputMaximum display resolution: 1920 × 1200 pixels Panel display resolution: 1920 × 1200 pixels When a video signal is inputNTSC, PAL, SECAM, 480/60i, 576/50i, 480/60p, 576/50p, 720/60p, 720/50p, 1080/60i, 1080/50i, 1080/24p Color system NTSC 3.58, PAL, SECAM, NTSC4.43, PA L - M , PA L - N , PA L 6 0
62Specifications INPUT OUTPUT (Computer/video)INPUT ARGB/YPBPR input connector: Mini D-sub 15 pin female, G with sync/Y: 1 Vp-p ± 2 dB, sync negative, 75 ohms terminated, RGB/P BPR: 0.7 Vp-p ± 2 dB, 75 ohms terminated, Sync signal: TTL level high impedance, positive/negative Audio input connector: Stereo mini jack, rated input 500 mVrms, input impedance more than 47 kohms INPUT B/ INPUT CHDMI input connector: HDMI 19-pin, HDCP support, Audio input connector: HDMI audio support S VIDEO INS video input connector: Mini DIN 4-pin, Y: 1 Vp-p ± 2 dB, sync negative, 75 ohmes terminated, C: (burst signal) 0.286 (NTSC)/0.3 (PAL/SECAM) Vp-p ± 2 dB, 75 ohms terminated Audio input connector: Phono jack × 2, rated input 500 mVrms, Input impedance more than 47 kohms VIDEO INVideo input connector: Phono jack, 1 Vp-p ± 2 dB, sync negative, 75 ohmes terminated Audio input connector: Shared with S VIDEO IN OUTPUTMONITOR output connector: Mini D-sub 15-pin female, G with sync/Y: 1 Vp-p ± 2 dB, sync negative, 75 ohms terminated, RGB/P BPR: 0.7 Vp-p ± 2 dB, 75 ohms terminated, Sync signal: HD, VD 4 V (open), 1 Vp-p (75 ohms), positive/negative Audio output connector: Stereo mini jack, stereo, 1 Vrms (maximum volume, when inputting 500 mVrms), output impedance 5 kohms Others connectorRS-232C connector: D-Sub 9 pin female INPUT DHDBaseT *4/LAN connector: RJ45, HDBaseT/ 100BASE-TX HDBaseT transmittable signal: HDMI (Video, Audio), RS-232C, Ethernet HDBaseT LAN cable: STP type (CAT5e or higher, straight, not supplied), Maximum length: 100 m Operating temperature/ Operating humidity0 °C to 40 °C (32 °F to 104 °F)/20% to 80% (no condensation) Storage temperature/ Storage humidity–10 °C to +60 °C (14 °F to 140 °F)/20% to 80% (no condensation) Power requirementsVPL-CH350/CH355: 100 V to 240 V AC, 3.6 A-1.6 A, 50/60 Hz VPL-CH370/CH375: 100 V to 240 V AC, 3.9 A-1.7 A, 50/60 Hz Power consumptionVPL-CH350/CH355: 100 V AC: 353 W 220 V AC: 334 W VPL-CH370/CH375: 100 V AC: 388 W 220 V AC: 367 W ItemsDescriptions ModelVPL-CH375/CH370/CH355/CH350
63Specifications Others *1: For details, refer to “Acceptable Input Signals” on page 66. *2: Information on accessories in this manual is current as of Aug. 2014. *3: Not all optional accessories are available in all countries and area. Please check with your local Sony Authorized Dealer. *4: VPL-CH375/CH355 only Design and specifications of the unit, including the optional accessories, are subject to change without notice.Standby power VPL-CH370: 100 V AC: 4.7 W/0.3 W 240 V AC: 4.9 W/0.5 W VPL-CH375: 100 V AC: 6.1 W/0.3 W 240 V AC: 6.2 W/0.5 W VPL-CH350: 100 V AC: 4.7 W/0.5 W 240 V AC: 4.9 W/0.5 W VPL-CH355: 100 V AC: 6.1 W/0.5 W 240 V AC: 6.2 W/0.5 W Heat dissipation VPL-CH350/CH355: 100 V AC: 1,204 BTU/h 220 V AC: 1,139 BTU/h VPL-CH370/CH375: 100 V AC: 1,323 BTU/h 220 V AC: 1,252 BTU/h Standard dimensions (W/H/D)Approx. 406 × 122.3 × 330.5 mm (15 31/32 × 413/16 × 13 inches) Approx. 406 × 113 × 330.5 mm (15 31/32 × 47/16 × 13 inches) (without projecting parts) Mass Approx. 5.7 kg (12 lb 5 1/2 oz) Supplied accessoriesSee “Checking the Supplied Accessories” in the supplied Quick Reference Manual. Optional accessories *2 *3Projector Lamp LMP-C250 (for replacement) Projector Lamp LMP-C281 (for replacement) ItemsDescriptions ModelVPL-CH375/CH370/CH355/CH350 Notes
64Specifications Pin assignment HDMI connector (HDMI, female) RGB input connector (Mini D-sub 15-pin, female) RS-232C connector (D-Sub 9-pin, male) 1 T.M.D.S. Data2+11 T.M.D.S. Clock Shield 2 T.M.D.S. Data2 Shield12 T.M.D.S. Clock – 3 T.M.D.S. Data2 –13 N.C. 4 T.M.D.S. Data1+14 RESERVED (N.C.) 5 T.M.D.S. Data1 Shield15 SCL 6 T.M.D.S. Data1 –16 SDA 7 T.M.D.S. Data0+17 DDC GND 8 T.M.D.S. Data0 Shield18 +5V Power 9 T.M.D.S. Data0 –19 Hot Plug Detect 10 T.M.D.S. Clock+ 1 2 19 18 1 Video input (red) R9Power supply input for DDC 2 Video input (green) G10 GND 3Video input (blue) B11 GND 4 GND 12 DDC/SDA 5 RESERVE 13 Horizontal sync signal 6 GND (R) 14 Vertical sync signal 7 GND (G) 15 DDC/SCL 8 GND (B) 1NC 6NC 2RXDA 7RTS 3TXDA 8CTS 4DTR 9NC 5 GND 5 1 9 6
65Specifications Others USB connector (Type A, female) USB connector (Type B, female) 1VBUS (4.4 - 5.25 V) 2 Data– 3 Data+ 4 Ground 1 VCC (+5 V) 2 Data– 3 Data+ 4 Ground
66Specifications Acceptable Input Signals*1 Computer signal Video signal *1: When a signal other than the signals listed in table is input, the picture may not be displayed properly. An input signal meant for screen resolution different from that of the panel will not be displayed in its original resolution. Text and lines may be uneven. *2: This is identified as a movie delivery signal of 720/60p. *3: This is identified as a movie delivery signal of 1080/60p. *4: Only G with sync/Y is supported. *5: Only VESA Reduced Blanking is supported. ResolutionfH[kHz]/ fV[Hz]Input connector RGB/ YPBPRHDMI 640 × 350 31.5/70 z 37.9/85z 640 × 400 31.5/70z 37.9/85z 640 × 480 31.5/60zz 35.0/67z 37.9/73z 37.5/75z 43.3/85z 800 × 600 35.2/56z 37.9/60zz 48.1/72z 46.9/75z 53.7/85z 832 × 624 49.7/75z 1024 × 768 48.4/60zz 56.5/70z 60.0/75z 68.7/85z 1152 × 864 64.0/70z 67.5/75z 77.5/85z 1152 × 900 61.8/66z 1280 × 960 60.0/60z 1280 × 1024 64.0/60zz 80.0/75z 91.1/85z 1400 × 1050 65.3/60z 1600 × 1200 75.0/60zz 1280 × 768 47.8/60z 1280 × 720 45.0/60z z*5 1920 × 1080 67.5/60z*3 1366 × 768 47.7/60zz 1440 × 900 55.9/60zz 1680 × 1050 65.3/60zz 1280 × 800 49.7/60zz 1920 × 1200 74.0/60z*5z*5 1600 × 900 60.0/60z*5z*5 SignalfV[Hz] Input connector VIDEO/ S VIDEOINPUT A*4INPUT B/ INPUT C/ INPUT D NTSC 60z– – PA L / SECAM50z–– 480i 60–zz 576i 50–zz 480p 60–zz 576p 50–zz 1080i 60–zz 1080i 50–zz 720p 60–z z 720p 50–z z 1080p 60––z 1080p 50––z 1080p 24––z Notes ResolutionfH[kHz]/ fV[Hz]Input connector RGB/ YPBPRHDMI
67Projection Distance and Lens Shift Range Others Projection Distance and Lens Shift Range The following describes the projection distance and height from lens center to bottom of screen by each projected screen size. The projection distance is the distance between the front of the lens and the surface of the projected image. Height H is the height from the bottom of the projected image (top for ceiling mount) to A (determined by drawing a perpendicular line from lens center to projected image surface). For this unit, the same projection distance calculations apply to both floor and ceiling installation. Floor Installation/Ceiling Installation (Top side parallel to ceiling) Projection distance L Projected imageFront of the lens A Height H from lens center to bottom of screen Front of the lens Height H from lens center to top of screen A Projected image Projection distance LTop side
68Projection Distance and Lens Shift Range The lens shift range represents the distance in percent (%) by which the lens can be shifted from the initial position of the projected image, with full width or full height of the projected image regarded as 100%. VS UP: Vertical lens shift range (up) [%] VSDN: Vertical lens shift range (down) [%] HS R: Horizontal lens shift range (right) [%] HSL: Horizontal lens shift range (left) [%] Projection distance/Projection distance formula Projection distance Unit: m (inches) Projection distance formula D: Projected image size (Diagonal) Center of the image Projected image VSUP VSDN HSLHSR Shaded region: Lens shift range Projected image Center of the projected imageLens shift range Center of the lens Side of the projector 50% 50% Projected image Center of the projected imageLens shift range Center of the lens Top of the projector 50% 50% Projected image size Projection Distance L Height H from lens center to bottom of screen Diagonal DWidth × HeightProjection Distance LProjection Distance L 80 inch (2.03m) 1.72 × 1.08 (68 × 42)2.59 – 3.83 (102 – 150)0.09 (4) 0.09 (4) 100 inch (2.54m) 2.15 × 1.35 (85 × 53)3.24 – 4.80 (128 – 189)0.11 (4) 0.11 (4) 120 inch (3.05m) 2.58 × 1.62 (102 × 64)3.90 – 5.77 (154 – 227)0.13 (5) 0.13 (5) 150 inch (3.81m) 3.23 × 2.02 (127 × 79)4.89 – 7.22 (193 – 284)0.17 (7) 0.17 (7) 200 inch (5.08m) 4.31 × 2.69 (170 × 106)6.53 – 9.65 (258 – 380)0.22 (9) 0.22 (9)
69Projection Distance and Lens Shift Range Others H: Distance between the bottom edge of the image and the center of the lens Expression#1 (Projection distance L) Unit: m (inches) Expression#2 (Height H from center of lens to edge of screen) Unit: m (inches) Lens shift range Minimum Projection Distance LMaximum Projection Distance L L=0.032886 × D-0.0487 (L=1.294738 × D-1.9185)L=0.048506 × D-0.0485 (L=1.909676 × D-1.9097) Height H from lens center to bottom of screen Minimum Projection Distance LMaximum Projection Distance L H=0.00112 × D+0.00000 (H=0.04417 × D+0.00000)H=0.00112 × D+0.00000 (H=0.04417 × D+0.00000) VSUP=VSDN=5[%] HSR=HSL=4[%]5% 5% 4% 4%
70Dimensions Dimensions 406.0 (15 31/32) Center of the lens Front Unit: mm (inches) 104.5 (4 1/8) 63.0 (2 15/32) Side Unit: mm (inches) 330.5 (13) 113.0 (4 7/16) 122.3 (4 13/16)