Sony Playstation 2 Instruction Manual

							41Using the Version Information screen
Main menu
7Close the disc cover.
Playback begins.
Note
The setting will not be cleared if 1) you do not start a DVD after step 4 or 2) you reset 
or turn off the console before step 6. 
						

							42Connecting to a network
You can enjoy online games by connecting the PlayStation®2 console to a 
broadband network. To play all online games, you will need the following:
 A Network Access Disc (supplied separately)
 A Memory Card (8MB) (for PlayStation
®2) (sold separately)
 A service contract with a Broadband Internet Service Provider (sold 
separately)
 An Ethernet Cable (sold separately)
 An External Network Device such as a Broadband enabled digital set-top 
box, a cable modem, an ADSL modem or a router (sold separately)
Notes
 You cannot play online games with this console using a dial-up or ISDN 
connection.
 USB connectivity from the External Network Device to the USB connector is not 
supported.
 There are two types of network cables: straight-through cable and crossover cable. 
Ensure that you use the correct type of cable when connecting your PlayStation
®2 
console to your Broadband Internet connection. Refer to the Instruction Manual 
supplied with the network device, or your Broadband Internet Service Provider for 
details.
You can connect the console to a network using an Ethernet network cable 
connected to the NETWORK connector on the console rear. You can 
connect to a 100 Base-TX or 10 Base-T network. Refer to the instructions 
supplied with the network device for details.
Basic network setup
Note
When connecting the console and a PC to the network, a network device such as a 
router or a hub may be required. Refer to the instructions supplied with the network 
device for details.
For more information on network setup, visit www.playstation.com
Networking
Connecting to a network
Connecting with a network cable
Network line
This will vary depending on the 
type of broadband service in your 
home.Network equipment
The type of equipment used will also 
vary depending on the type of 
service.
Commercially 
available network cable
PC Broadband modem, router etc. 
						

							43Connecting to a network
Networking
Connecting the console
WarningDo not plug the AC power cord for the console into the electrical outlet until you have made all other connections.
1Connect the Ethernet network cable to the NETWORK 
connector on the console rear.
2Insert the connector on the network cable to the network 
device.
The connection method will vary depending on the network device. 
Refer to the instructions supplied with the network device for details.
WarningDo not connect network cables or telephone cords of the following types to the 
network connector; too much electrical current may pass through the connector, 
causing a malfunction, excessive heat or fire in the connector:
- Standard residential telephone lines
- Network cables not appropriate for use with a 10Base-T/100Base-TX network
- Any ISDN (digital) compatible phone or data line
- PBX phone lines
- Other unknown types of telephone lines
Commercially available network cableConsole rear 
						

							44Creating network settings
After you have connected a network cable to the console, you will need to 
create and save network settings. To do this you need a Network Access 
Disc supplied by registering your PlayStation
®2 console.  You can register 
your PlayStation
®2 console by visiting www.ps2registration.com
To create a network setting, you will need the following items:
 A Memory Card (8MB) (for PlayStation
®2) (sold separately)
 Login and network setup information provided by your Broadband 
Internet Service Provider
Note
Depending on the type of Internet service used, you may need to provide your 
Broadband Internet Service Provider with your MAC Address. You can find the 
MAC Address for your console listed in the Version Information screen 
( page 39).
Creating network settings
Items you will need 
						

							45Compatible software
Additional information
You can play discs of the following types on the PlayStation®2 console:
* Throughout this manual, the term DVD-Video is used to refer to DVD-R,
DVD-RW (Video mode), DVD+R and DVD+RW discs.
About PlayStation®2 format CD-ROM and DVD-ROM, and 
PlayStation
® format CD-ROM discs
The console can only play discs with the   designation.
Discs marked with   ,   or 
 cannot be played.
About DVD-Videos
 The console can only play discs recorded for the PAL broadcast standard. 
You cannot play discs recorded for other broadcast standards (such as 
NTSC) on this console (unless the NTSC disc displays the ALL label 
and an NTSC compatible TV is used).
 DVD-Videos are assigned a number (region code) for the geographic 
region in which the disc can be played. This console can only play discs 
marked with region code 4 (SCPH-79002 only), 2 (SCPH-79003 
only) or ALL.
About DVD-R, DVD-RW, DVD+R and DVD+RW discs 
 Some discs may not be playable due to scratches, dust or problems 
encountered during recording.
 Only discs that have been finalised can be played.
 Sections of video recorded on CPRM (Content Protection for Recordable 
Media)-compatible DVD-RW discs or on CPRM-compatible DVD-R 
discs using the copy-once capability cannot be played on this console.
Additional information
Compatible software
Disc typeDisc logo
PlayStation
®2 format DVD-ROM
[12 cm, Silver] , PlayStation®2 logo and 
 designation
PlayStation
®2 format CD-ROM
[12 cm, Blue] , PlayStation®2 logo and 
 designation
PlayStation
® format CD-ROM
[12 cm, Black]PlayStation® logo and   
designation
Audio CD
[12 cm, 8 cm]
DVD-Video*
[12 cm, 8 cm]The DVD VIDEO logo is a 
trademark.
DVD-RW (VR mode)
[12 cm, 8 cm]The DVD-RW logo is a 
trademark.
(SCPH-79002 only) (SCPH-79003 only)
Music discs encoded with copyright protection 
technologies
The audio CD playback feature of this product is designed to conform 
to the Compact Disc (CD) standard. Recently, some record companies 
have started marketing music discs encoded with copyright protection 
technologies. Some of these music discs do not conform to the CD 
standard and may not be playable on this product.
4ALL2ALL 
						

							46Accessories
About DualDiscs
A DualDisc is a two sided disc product which contains DVD recorded 
material on one side and digital audio material on the other side. However, 
since the audio material side does not conform to the Compact Disc (CD) 
standard, playback on this product is not guaranteed.
Optional accessories are available for this model of PlayStation
®2 console. 
When using optional accessories, be sure to purchase those that are 
compatible with this model of PlayStation
®2 console. Contact the 
appropriate PlayStation
® customer service helpline which can be found 
within every PlayStation
® and PlayStation®2 format software manual or 
visit www.playstation.com for details on the accessories that can be used 
with this model.
The following accessories are not
 compatible with this model of 
PlayStation
®2 console:
i.LINK and i.LINK logo   are trademarks.
Accessories
Accessories not compatible with this model of 
PlayStation
®2 console
Model numberProduct name
SCPH-10350 E Network Adaptor (Ethernet) (for PlayStation
®2)
SCPH-1070 E Multitap
SCPH-10090 E Multitap (for PlayStation
®2)
SCPH-10040 E Vertical Stand (for PlayStation
®2)
SCPH-10110 E Horizontal Stand (for PlayStation
®2)
- Product that use the   S400 i.LINK connector 
						

							47GUARANTEE
Additional information
 This model of the PlayStation®2 console features a built-in IR receiver. 
When operating with a DVD Remote Control (for PlayStation
®2) (sold 
separately), do not insert an IR receiver (for PlayStation
®2) into a 
controller port of the console.
 When purchasing a DVD Remote Control for use with this console, 
choose one that does not include a separate IR receiver Unit.
 You cannot open or close the disc cover using the DVD Remote Control.
Only the Multitap (for PlayStation
®2) (SCPH-70120 E)* (sold separately) 
can be used with this console. Do not connect Multitap products with other 
model numbers to the console as this may result in damage to the console.
* You can use this product with both PlayStation®2 and PlayStation® format 
software titles.
GUARANTEE
Thank you for buying this Product.  The term Product means the 
PlayStation
®2 computer entertainment system together with the 
accessories and/or peripherals with which it is packaged.  This Guarantee 
does not cover any software whether or not packaged with the Product.
Sony Computer Entertainment Europe Ltd (SCEE) guarantees that this 
Product is free from defects in material and workmanship that result in 
Product failure during normal usage in accordance with the terms set out 
in below and will, for a period of 1 (one) year from the date of original 
purchase, repair or (at SCEEs option) replace any component part of this 
Product, free of charge, where it is faulty due to defective materials or 
workmanship. Replacement will be with a new or refurbished component 
or unit, at SCEEs option, which is guaranteed for the remainder of the 
original Guarantee Period.
The benefits conferred by this Guarantee are in addition to the statutory 
rights and remedies the consumer has in the UK and Eire in respect of this 
Product and this Guarantee does not affect such rights and remedies in any 
way.  The benefits conferred by this Guarantee are also in addition to other 
rights and remedies which the consumer has in law in Australia and New 
Zealand in respect of this Product, including rights and remedies available 
under the Trade Practices Act 1974 and State and Territory legislation in 
Australia and the Fair Trading Act 1986 in New Zealand and this 
Guarantee does not affect such rights and remedies in any way.
This Guarantee is given to you by Sony Computer Entertainment Europe 
Ltd of 10 Great Marlborough Street, London, W1F 7LP, United Kingdom.
About the DVD Remote Control (for 
PlayStation
®2)
About Multitaps
GUARANTEE 
						

							48GUARANTEE
IMPORTANTIf this Product needs any repair which is not covered by this Guarantee, 
please call your local Customer Service helpline for advice.  If your home 
country is not one of those listed, please contact your retailer.
1. If you need to claim under this Guarantee, please call your local Customer Service 
helpline (listed in a PlayStation® and PlayStation®2 format software manuals) for 
return instructions and other guidance.
2. This Guarantee is only valid:
i. in the United Kingdom, Eire, Australia and New Zealand; and
ii. when the original sales receipt or invoice or other proof of purchase 
(indicating the date of purchase and retailers name) is presented together with 
the faulty Product (and has not been altered or defaced since the date of 
original purchase); and
iii. when the Guarantee seal and the serial number on the Product have not been 
damaged, altered or removed.
3. You may not claim under this Guarantee when the Product is damaged as a result 
of:
i. commercial use, accident, fair wear and tear, negligence, abuse, or misuse 
(including, without limitation, failure to use this Product for its normal 
purpose and/or in accordance with instructions on proper use and 
maintenance, or installation or use in a manner inconsistent with applicable 
local technical or safety standards);
ii. use in conjunction with any unauthorised peripheral (including, without 
limitation, game enhancement devices, adaptors and power supply devices);
iii. any adaptation or adjustment to, or alteration of, the Product carried out for 
any reason, and whether properly carried out or not;
iv. maintenance or repairs carried out other than by a SCEE  authorised service 
facility; or
v. use in conjunction with unauthorised software, virus infection, or fire, flood 
or other natural calamity.
4. To the extent permitted by applicable law, this Guarantee will be your sole and 
exclusive remedy in relation to defects in this Product and all other guarantees, 
warranties, terms and conditions, express or implied by statute or otherwise, in 
respect of this Product are excluded and neither SCEE nor any other Sony entity, 
or their suppliers or authorised service facilities, will be liable for any special, 
incidental, indirect or consequential loss or damage. 
						

							49Specifications
Additional information
GeneralAC adaptor
Supplied accessories
page 7
Design and specifications are subject to change without notice.
Copyrights
This product incorporates copyright protection technology that is protected 
by method claims of certain U.S. patents and other intellectual property 
rights owned by Macrovision Corporation and other rights owners. Use of 
this copyright protection technology must be authorized by Macrovision 
Corporation, and is intended for home and other limited viewing uses only 
unless otherwise authorized by Macrovision Corporation. Reverse 
engineering or disassembly is prohibited.
This product is manufactured under license from Dolby Laboratories.
Dolby and the double-D symbol are trademarks of Dolby Laboratories.
Confidential unpublished works. ©1992-1997 Dolby Laboratories. All 
rights reserved.
DTS and DTS Digital Out are trademarks of Digital Theater Systems, 
Inc.
Specifications
Power requirements! DC IN 8.5V
Electrical current consumption 
(approx.)4.5 A
Console dimensions (approx.) 230 × 28 × 152 mm (w/h/d)
Console mass (approx.) 600 g
Signal format PAL
Operating temperature 5 °C to 35° C
Inputs/outputs on the console 
frontController port (2)
MEMORY CARD slot (2)
 USB connector (2)
Inputs/outputs on the console 
rearNETWORK connector
! DC IN 8.5V connector
AV MULTI OUT connector
DIGITAL OUT (OPTICAL) connector
Power requirements 100-240 V AC, 50/60 Hz
Voltage/electrical current 
output (approx.)8.5 V, 4.5 A
Adaptor dimensions (approx.) 60 × 28 × 124 mm (w/h/d)
Adaptor mass (approx.) 250 g 
						

							50Troubleshooting
About national export control
This product may fall within the scope of national export control 
legislation. You must comply fully with the requirements of such 
legislation and of all other applicable laws of any jurisdiction in relation to 
this product.
About copy protection
Attempted copying of DVDs played on this device, may be prevented or 
restricted by copy protection technology contained on the DVD. 
Attempted recording or copying of DVDs for private use by the removal 
or circumvention of copy protection technology may be prohibited under 
applicable law.
About access control
This product incorporates access control technology. Use of software not 
specifically designed for this product (excluding DVD-Videos and audio 
CDs) and copies of software designed for this product are prevented by 
access control. Unauthorised transfer, delivery, display, export, import, or 
transmission of programs, devices, or the product modified with programs 
or devices, to defeat the purpose of this access control feature is or may be 
prohibited by law.Go through this section if you experience difficulty in operating the 
PlayStation
®2 console. Should any problem persist, call the PlayStation® 
service line at the number listed on your guarantee card for assistance.
There is no picture on the TV screen.
,Check whether the =/1 (on/standby) indicator on the console front is lit up in red. 
If it is red, press the =/1 (on/standby)/RESET button to turn on the console (the 
=/1 indicator will turn green).
,Switch the input mode of the TV (or VCR) as appropriate for the connector in 
use on the console.
,Try using another compatible AV Cable. There may be a problem with the AV 
Cable in use.
,Set Component Video Out to Y Cb/Pb Cr/Pr in the System Configuration 
menu ( page 38) when connecting the console to the component AV inputs on 
a TV. Use the supplied AV Cable to make the setting, and then connect to the TV 
using the Component AV Cable (sold separately).
,Check that the inserted disc can be played with the PlayStation
®2 console 
(page45).
Troubleshooting
Check the following items first:
 The console is turned on.
 The AC power cord is connected properly to the electrical outlet.
 The cables are correctly and securely connected.
Check also for the TV or monitor and other connected devices.
Picture