Sony Playstation 2 Instruction Manual

3-214-730-22(1)
Instruction Manual
SCPH-79002
SCPH-79003
Before using this product, carefully read this manual and retain it for future reference. 

2WARNING
To reduce the risk of fire or electric shock, do not expose this 
apparatus to rain or moisture.
To prevent fire or shock hazard, do not place a container filled 
with liquids on top of the console.
To avoid electrical shock, do not open the cabinet. Refer 
servicing to qualified personnel only.
Caution
Use of controls or adjustments or performance of procedures 
other than those specified herein may result in hazardous 
radiation exposure. 
The use of optical instruments with this product will...

3Table of contents
WARNING .................................................................................... 2
Precautions ..................................................................................... 4
Preparation
Getting started ................................................................................ 7
Part names ...................................................................................... 8
Connecting to a TV...

4Precautions
This product has been designed with the highest concern for safety. However, any 
electrical device, if used improperly, has the potential for causing fire, electrical 
shock or personal injury. To help ensure accident-free operation, follow these 
guidelines:
 Observe all warnings, precautions and instructions.
 Stop use and unplug the AC power cord from the electrical outlet immediately if 
the device functions in an abnormal manner or produces unusual sounds or smells.
 Contact the...

5Precautions
 Do not set the console other than in the vertical or horizontal position. When 
placing in the vertical position, use the Vertical Stand (for PlayStation®2) (sold 
separately) that is compatible with this console. Also, do not change the position 
while the console is turned on.
 Keep the system and accessories, including cable ties and fasteners, out of the 
reach of small children.
AC adaptor and AC power cord use
 To help ensure safe operation, regularly inspect the AC adaptor and AC...

6Precautions
When connecting the console to a plasma or projection* TV
Do not leave a still image on the TV screen for an extended period of time, as this 
may leave a faint image permanently on the screen.
* Except LCD screen types
Note on safety when playing DVDs or CDs
If you set the volume too high, it may harm your hearing or damage the speakers. 
Exercise care when setting the volume.
Moisture condensation
If the console or disc is brought directly from a cold location to a warm one, moisture 
may...

7Getting started
Preparation
Check that you have all of the following items. If any items are missing, 
contact the appropriate PlayStation
® customer service helpline which can 
be found within every PlayStation
® and PlayStation®2 format software 
manual.You can place the console in either the horizontal or vertical position.
Horizontal position
Set the console horizontally.
Vertical position
When setting the console in the vertical 
position, use the SCPH-70110 E Vertical 
Stand (for PlayStation
®2)...

8Part names
CautionDo not place the console in locations where it may be exposed to the following 
conditions:
 Places subject to excessive cigarette smoke or dust. Cigarette smoke residue 
or dust build-up on the internal components, such as the lens, may cause the 
console to malfunction.
 Places subject to extreme temperatures, in direct sunlight, near a heat source, 
or in a car with its windows closed (particularly in summer). These conditions 
may warp the exterior of the console or cause the...

9Connecting to a TV
Preparation
Note
For part names of the Analog Controller (DUALSHOCK®2), see Using the Analog 
Controller (DUALSHOCK®2) ( page 17).
 Do not plug the AC power cord for the console into the electrical outlet 
until you have made all other connections.
 Check that the TV is turned off.
Connect the console to the TV as shown below.
PlayStation®2 console rear
Rear vent
! DC IN 8.5V 
connector
AV MULTI OUT connector DIGITAL OUT (OPTICAL) 
connector NETWORK connector
Connecting to a TV...

10Connecting to a TV
CautionIf you display a still image on a plasma or projection* TV screen for an extended 
period of time, ghosting may occur. This is a characteristic of these types of 
TVs. Static, non-moving images, such as console setting menus, DVD menus or 
paused images, may leave a faint image permanently on the TV screen if left on 
for an extended time. Refer to the instructions supplied with your TV for details.
Note
The console can be connected to a VCR or an integrated TV/VCR. Note,...