Sony Nex 6 User Manual

GB
81
Others
12/12Image number/
Number of images 
in the view mode
Appears when HDR 
did not work on the 
image.
 Appears when 
[Picture Effect] did 
not work on the 
image.
Histogram
DisplayIndication 

GB
82Learning more about the camera 
(αHandbook)
“αHandbook,” which explains how to use the camera in detail, is included on 
the CD-ROM (supplied). Refer to “αHandbook” for in-depth instructions on 
the many functions of the camera.
xFor Windows users
xFor Mac users
1Turn on your computer, and insert the CD-ROM (supplied) 
into the CD-ROM drive.
2Click [Handbook].
3Click [Install].
4Start “αHandbook” from the shortcut on the desktop.
1Turn on your computer, and insert the CD-ROM (supplied) 
into the...

GB
83
Others
Troubleshooting
If you experience trouble with the camera, try the following solutions.
The battery pack cannot be installed.
 When you insert the battery pack, use the tip of the battery pack to push the 
lock lever (page 16).
 You can use an NP-FW50 battery pack only. Make sure that the battery is 
NP-FW50.
The remaining battery level indicator shows incorrect level or 
power runs out quickly despite the indicator showing sufficient 
battery level.
 This phenomenon occurs when you use the...

GB
84
The power turns off suddenly.
 When the camera or battery pack is too warm, the camera displays a warning 
message and turns off automatically to protect the camera.
 If you do not operate the camera for given period of time, the camera turns to 
power saving mode. To cancel the power save, operate the camera by means 
such as pressing the shutter button halfway down.
The charge lamp on the camera flashes when charging the battery 
pack.
 You can only use an NP-FW50 battery pack. Make sure that the...

GB
85
Others
Nothing is displayed on the LCD screen when the power is turned 
on.
 If you do not operate the camera for given period of time, the camera turns to 
power saving mode. To cancel the power save, operate the camera, such as 
pressing the shutter button halfway down.
The shutter does not release.
 You are using a memory card with a write-protect switch, and the switch is 
set to the LOCK position. Set the switch to the recording position.
 Check the free capacity of the memory card.
 You...

GB
86
The flash takes too long to recharge.
 The flash has been fired in succession in a short period. When the flash has 
been fired in succession, the recharging process may take longer than usual 
to avoid overheating of the flash.
The image taken with the flash is too dark.
 If the subject is beyond the flash range (the distance that the flash can reach), 
the pictures will be dark because the flash light does not reach the subject. If 
the ISO is changed, the flash range also changes with it (page...

GB
87
Others
The image is blurred.
 The picture was taken in a dark location without the flash, resulting in 
camera-shake. The use of a tripod or the flash is recommended (page 48). 
[Hand-held Twilight] and [Anti Motion Blur] in [Scene Selection] (page 44) 
are also effective in reducing blur.
The exposure value is flashing on the LCD screen or the 
viewfinder.
 The subject is too bright or too dark for the metering range of the camera.
Images cannot be played back. The folder/file name has been...

GB
88Precautions
On the functions available 
with the camera
 Your camera is 1080 60i-
compatible or 1080 50i-
compatible.
To check whether the camera is 
1080 60i-compatible or 1080 
50i-compatible, check for the 
following marks on the bottom of 
the camera.
1080 60i-compatible camera: 60i
1080 50i-compatible camera: 50i
 Your camera is compatible with 
1080 60p/50p movies. Unlike 
existing standard recording modes, 
which record in an interlacing 
method, this camera records using 
a progressive...

GB
89
Others
On using the lenses and 
accessories
It is recommended that you use Sony 
lenses/accessories designed to suit 
the characteristics of this camera. 
Using the products of other 
manufacturers may cause the camera 
not to operate to its capability, or 
result in accidents and malfunctions 
of the camera.
On the Multi Interface Shoe Set the power switch of the camera 
to OFF before you attach or 
remove an accessory, such as the 
flash, to the Multi Interface Shoe. 
When attaching an accessory,...

GB
90
If moisture condensation occursTurn off the camera and wait about 
an hour for the moisture to 
evaporate. Note that if you attempt 
to shoot with moisture remaining 
inside the lens, you will be unable to 
record clear images.
On the internal 
rechargeable battery
This camera has an internal 
rechargeable battery for maintaining 
the date and time and other settings 
regardless of whether the power is 
on or off, or the battery is installed 
or not. This rechargeable battery is 
continually...