Sony Klv S19a10e Operating Instructions

							Using the Settings
51
Using the Settings
Selecting Screen 
OptionsThe Screen settings includes the following options:
To highlight an option and to change settings, press VvB b.
Press   to confirm the selection.
 Using the Screen Settings
To select the Screen settings
1.Press 
WEGA GATE2.Select 
Settings3.Highlight 
Screen4.Press 
to select
To  e x i t  t h e  Screen settings, press  . 
ScreenTVWide  Mode:  Wide  Zoom
4:3  Default:  Wide  Zoom
Overscan: Normal
V  Center:  0
H  Center:  0
Phase:
Pitch:
Reset:Wide Zoom
Normal
Full
Zoom
Select : Exit:Back:
Set :WEGA GATE
WEGA GATE
WEGA GATE
OptionDescription
Wide Mode
Select a Wide 
Mode to use for 
4:3 sourcesWide ZoomSelect to enlarge to fill screen with minimum 
distortion.
NormalSelect to display 4:3 picture in original size 
when the original source is 4:3 (Standard 
definition source).
FullSelect to enlarge the original picture 
horizontally to fill the screen when the original 
source is 4:3 (Standard definition source). When 
the original source is 16:9 (High definition 
source), select this mode to display 16:9 picture 
in original size.
ZoomSelect to enlarge the original picture without 
distorting the aspect ratio.
4:3 Default
Select the default 
Screen Mode to 
use for 4:3 
sourcesWide ZoomSelect to enlarge the 4:3 picture to fill the 16:9 
screen, keeping the original image as much as 
possible.
NormalSelect to return the 4:3 picture to its original 
size.
FullSelect to enlarge the 4:3 picture horizontally 
only, to fill the 16:9 screen.
ZoomSelect to enlarge the 4:3 picture horizontally and 
vertically to an equal aspect ratio that fills the 
16:9 screen. Useful for watching Letterbox 
movies.
OffSelect to continue using the current Wide Screen 
Mode setting when the channel or input is 
changed.
Not available for PC input.
zTo change from one Wide 
Mode option to another, 
use WIDE on the remote 
control.
zFor Wide Zoom and Zoom 
modes, you can adjust the 
ver tical position of the 
picture. For details, see 
page 52.
zNormal, Full1 and Full2 are 
available for Wide Mode 
when PC input is selected.
z4:3 Default functions only 
when the TV receives 480i 
or 480p signals.
zIf 4:3 Default option is set 
to anything but Off, the 
Wide Mode setting 
changes only for the 
current channel. When you 
change channels (or 
inputs), Wide Mode is 
automatically replaced with 
the 4:3 Default setting for 
4:3 sources. To retain the 
current Wide Mode setting 
as channels and inputs are 
changed, set 4:3 Default to 
Off.
(Continued)
 
						

							Using the Settings
52
PC Input Signal Compatibility Chart
*: Corresponding to the VGA signal
Overscan NormalDisplays a standard size picture.
+1/+2Allows you to adjust the viewable picture area 
size. This is useful for viewing ticker tape or 
banners at the top or bottom of the screen.
Not available for PC input.
V Center
(Vertical Center)Allows you to move the position of the picture up and down in 
the window. Available only in Wide Zoom and Zoom modes.
Press V/v and press   to choose a correction between +10 
and –10 (Zoom mode), and +10 and –10 (Wide Zoom mode).
H Center
(Horizontal 
Center)Allows you to move the position of the picture left and right in 
the window. This function allows for horizontal adjustment of 
the picture being displayed.
PhaseAdjust after Pitch to fine tune overall sharpness.
Available only for PC input.
PitchAdjust uneven sharpness on screen.
Available only for PC input.
ResetClear Wide Mode, V Center, H Center, Phase and Pitch 
adjustments you made to the factory settings.
Available only for PC input.
OptionDescriptionz4:3 Default and Overscan 
are not available for PC 
Input.
zH Center feature is useful if 
TV is connected to game 
equipment.
zThe setting of V Center and 
H Center can be between
– 50 and + 50 for PC input.
zAdjust Phase and Pitch 
with Wide Mode set to 
Normal.
ResolutionHorizontal frequency 
(kHz)Vertical 
frequency (Hz)VESA standardSignalsHorizontal 
(Pixel) ×Vertical 
(Line)
VGA640×48031.560–*640×48037.973✔
640×48037.575✔720×40031.570–*SVGA800×60035.256✔
800×60037.960✔800×60046.975✔800×60048.172✔
848×48031.060✔XGA1024×76848.460✔1024×76856.570✔
1024×7686075✔WXGA1280×76847.460✔1280×76847.860✔
1280×76860.375✔1360×76847.760✔
This TV does not support Sync on Green or Composite Sync.
If a signal other than in the above chart is input, it may not be displayed properly or may not be displayed 
as you set.
Using the Vertical frequency (Hz) of the personal computer at 60 is recommended.
 
						

							Using the Settings
53
Using the Settings
Selecting Channel 
OptionsThe Channel settings includes the following options:
To highlight an option and to change settings, press VvB b.
Press   to confirm the selection.
 Using the Channel Settings
To select the Channel settings
1.Press 
WEGA GATE2.Select 
Settings3.Highlight 
Channel4.Press 
to select
To  e x i t  t h e  Channel settings, press  . 
Favorite  Channels
Cable: On
Channel  Fix:  Off
Auto  Program:            
Show/Hide  Channels
Label  Channels Channel TVOn
Off
Select : Exit:Back:
Set :WEGA GATE
WEGA GATE
WEGA GATE
OptionDescription
Favo r i te  
ChannelsLets you set up a list of up to 8 of your favorite channels.
1Press   to select Program.
2Press V/v to highlight a Favorite Channel number (1-8) 
which you want to make your Favorite Channel, then press 
 to select it.
3Press V/v to scroll through the channels until you find the 
channel that you would like to edit and then press   to 
select it.
4To select other Favorite Channel numbers, repeat steps 2-3.
5Press B to return to the Channel settings, or press WEGA 
GATE to exit Settings.
Cable OnSelect if you are receiving cable channels with a 
CATV cable.
OffSelect if you are using an antenna.
You should run Auto Program after changing the 
cable setting.
Channel Fix
Useful when you 
have a cable box 
or a satellite 
receiver 
connectedOffTurns off Channel Fix.
2-6Select one of these channels if something is 
connected to the VHF/UHF jack.
Video 1, 4Use this setting if you have connected the 
equipment to the A/V input jacks.
Auto ProgramAutomatically sets up the channel list on the TV for all 
receivable channels.
zAlso, you can access the 
Favorite Channels list on 
the WEGA GATE control 
panel.
(Continued)
 
						

							Using the Settings
54
Show/Hide 
ChannelsAllows you to show or hide channels that appear when you use 
the CH +/– buttons.
1Press V/v to scroll through the channels until you find the 
channel you want to show or hide. Then press   to 
select it.
2Press V/v to determine if the channel will be shown or 
hidden. 
3To show or hide more channels, repeat steps 1 and 2.
4Press B to return to the Channel settings, or press WEGA 
GATE to exit Settings.
Label ChannelsAllows you to assign labels (such as station call letters) to 
channel numbers.
1Press V/v to scroll through the channel numbers. Then 
press   to select the channel number that you want to 
assign a label.
2Press V v B b to highlight Label and press  .
3Press V/v to scroll through the label characters (A-Z, 0-9, 
etc.). Then press   to select the highlighted character. 
Repeat to add up to 5 characters to the label.
4To assign labels to more channels, repeat steps 1-3.
5Press B to return to the Channel settings, or press WEGA 
GATE to exit Settings.
OptionDescriptionzChannels that you set to be 
hidden can be accessed 
only with the 0-9 buttons. 
zAlso, you can access the 
TV channel list on the 
WEGA GATE control 
panel.
 
						

							Using the Settings
55
Using the Settings
Selecting Parent 
OptionsThe Parent settings includes the following options:
To change settings, press VvB b.
Press   to confirm the selection.
 Using the Parent Settings
The Parent settings allows you to set up the TV to block programs 
according to their content and rating levels.
To select the Parent settings
1.Press 
WEGA GATE2.Select 
Settings3.Highlight 
Parent4.Press 
to select
Use 0-9 on the remote control to enter a four-digit password.
The first time you create a password, confirm the password by entering it 
again. 
The Parent settings options appear.
To  e x i t  t h e  Parent settings, press  . 
You need your password for any future access into the Parent settings. If you lose your password, see 
“Lost password.” on page 64.
Parent TVLock: Off
Select  Country:
Change  PasswordOff
Child
Youth
Young Adult
Custom
Select : Exit:Back:
Set :WEGA GATE
WEGA GATE
WEGA GATE
OptionDescription
Lock
Turn ratings 
on/off and select a 
rating systemOffParental lock is off. No programs are blocked 
from viewing.
ChildMaximum ratings permitted are:
sUS: TV-Y, TV-G, G
sCanada: C, G, TV-Y, TV-G
Yo u t hMaximum ratings permitted are:
sUS: TV-PG, PG
sCanada: C8+, PG, 8ans+, TV-PG
Young AdultMaximum ratings permitted are:
sUS: TV-14, PG-13
sCanada: 14+, 13ans+, TV-14
CustomSelect to set ratings manually. 
sUS: See page 56 for details.
sCanada: See page 57 for details.
Select Country U.S.A.Select to use USA ratings (see page 56).
CanadaSelect to use Canadian ratings (see page 57).
Change 
Pa s swo r dFor changing your password.
zIf you are not familiar with 
the Parental Guideline 
rating system, you should 
select Child, Youth, or 
Young Adult to help 
simplify the rating 
selection. To set more 
specific ratings, select 
Custom.
zFor descriptions of Child, 
Youth, and Young Adult 
ratings, see page 56.
 
						

							Using the Settings
56
US Models: 
Selecting Custom 
Rating OptionsFor US models, the Custom Rating menu includes the following options. For 
Canadian models, see page 57.
Viewing Blocked 
ProgramsYou can view blocked programs by entering the password. Press ENT when 
tuned to a blocked program, then enter the password. This temporarily 
switches off Parent. To reactivate the Parent settings, turn off the TV. When 
the TV is turned on again, your Parent settings are reactivated.
OptionDescription
Movie Rating GAll children and General Audience.
PGParental Guidance suggested.
PG-13Parental Guidance for children under 13.
RRestricted viewing, parental guidance is 
suggested for children under 17.
NC-17 and XNo one 17 or under allowed.
TV Rating
Block programs 
by their rating, 
content or bothAge-Based Ratings
TV-YAll children.
TV-Y7Directed to children age 7 and older.
TV-GGeneral Audience.
TV-PGParental Guidance suggested.
TV-14Parents Strongly cautioned.
TV-MAMature Audience only.
Content-Based Ratings
FVFantasy Violence.
DSuggestive Dialogue.
LStrong Language.
SSexual situations.
VViolence.
Unrated
Block programs or 
movies that are 
broadcast without 
a ratingAllowAllows programs and movies that are broadcast 
without a rating.
BlockBlocks all programs and movies that are 
broadcast without a rating.zThe Content-Based 
Ratings are linked to the 
level of the Age-Based 
Rating. For example, a 
program with an Age-
Based Rating of TV-PG V 
(Violence) rating may 
contain moderate violence, 
while a TV-14 V (Violence) 
rating may contain more 
intense violence.
zTo ensure maximum 
blocking capability, set the 
Age-Based Ratings.
zIf you block unrated TV 
programs, be aware that 
the following types of 
programs may be blocked: 
programs broadcast from 
another country, 
emergency broadcasts, 
political programs, sports, 
news, public service 
announcements, religious 
programs and weather.
 
						

							Using the Settings
57
Using the Settings
Canadian Models: 
Selecting Custom 
Rating OptionsFor Canadian models, the Custom Rating menu includes the following 
options. For US models, see page 56
.
Viewing Blocked 
ProgramsYou can view blocked programs by entering the password. Press ENT when 
tuned to a blocked program, then enter the password. This temporarily 
switches off Parent. To reactivate the Parent settings, turn off the TV. When 
the TV is turned on again, your Parent settings are reactivated.
OptionDescription
English Rating CAll children.
C8+Children 8 years and older.
GGeneral programming.
PGParental Guidance.
14+Viewers 14 and older.
18+Adult programming.
French Rating GGeneral programming.
8ans+Not recommended for young children.
13ans+Not recommended for ages under 13.
16ans+Not recommended for ages under 16.
18ans+Programming restricted to adults.
U.S.A. RatingSee “US Models” on page 56 for details.
 
						

							Using the Settings
58
Selecting 
Clock/Timers 
OptionsThe Clock/Timers settings includes the following options:
To highlight an option and to change settings, press VvB b.
Press   to confirm the selection.
 Using the Clock/Timers Settings
To Select the Clock/Timers settings
1.Press 
WEGA GATE2.Select 
Settings3.Highlight 
Clock/Timers4.Press 
to select
To  e x i t  t h e  Clock/Timers settings, press  . 
Clock/Timers TVSleep: Off
Timer 1:  Off
Timer 2:  Off
Current  TimeOff
15 minutes
30 minutes
45 minutes
60 minutes
90 minutes
Select : Exit:Back:
Set :WEGA GATE
WEGA GATE
WEGA GATE
OptionDescription
SleepSet the time in minutes (15 minutes, 30 minutes, 
45 minutes, 60 minutes, 90 minutes, or Off) that you want 
the TV to remain on before shutting off automatically. 
Timer 1
Timer 2You can use the Timers to program the TV to turn on and off 
and tune to a specific channel at two scheduled viewing times.
Timer 1 and Timer 2 are not available to be set until you set 
the Current Time.
1Press V/v to highlight Timer 1 or Timer 2. To set the 
timer, press b or .
2Press V/v to highlight one of the following options, then 
press .
SetSelect to set the Timer by day, time, 
duration, and channel.
OnSelect to turn on the timer.
OffSelect to turn off the Timer. (Your 
previous settings are saved.)
3If you selected Set in step 2, press V/v to set the day(s), 
hour, minute, duration, and channel number. Press   
or b to confirm each setting and move to the next setting. 
Press B to go back to the previous setting and select On to 
turn on the timer. TIMER LED on the front panel will 
light, indicating the timer has been set.
4Press WEGA GATE to exit Settings. 
zTo return to the Timer 
settings after programming 
one of the Timers or 
current time, press B.
zTimer will be set to Off 
when:
 Auto Program is executed
 Channel Fix is set
  the AC power cord is 
disconnected and then 
reconnected to turn the 
TV on and the Current 
Time is displayed as 
--:-- --.
 
						

							Using the Settings
59
Using the Settings
Current TimeSelect to set the current time (day, hour, minute, and AM/PM).
1Press   to select Current Time.
2Press V/v to set the current time (day, hour, minute, and 
AM/PM). Press   or b to confirm each setting and 
move to the next setting. Press B to go back to the previous 
setting.
3Press WEGA GATE to exit Settings.
OptionDescription
 
						

							Using the Settings
60
Selecting Setup 
OptionsThe Setup settings includes the following options:
To highlight an option and to change settings, press V v B b.
Press   to confirm the selection.
 Using the Setup Settings
To select the Setup settings
1.Press 
WEGA GATE2.Select 
Settings3.Highlight 
Setup4.Press 
to select
To  e x i t  t h e  Setup settings, press  . 
Caption  Vision:  Off
Info  Banner:  On
Label  Video  Inputs
Language: English
Auto  YC:  On
Power  Saving:  Standard
Light  Sensor:  On Setup TV
Select : Exit:Back:
Set :WEGA GATE
Off
CC1
CC2
CC3
CC4
Text1
Text2
Text3
Text4
WEGA GATE
WEGA GATE
OptionDescription
Caption VisionAllows you to select from several closed caption modes (for 
programs that are broadcast with closed caption).
OffCaption Vision is turned off. 
CC1, CC2,
CC3, CC4Displays a printed version of the dialog or sound 
effects of a program. (Should be set to CC1 for 
most programs.)
Te x t 1,Te x t 2, 
Te x t 3,Te x t 4Displays network/station information presented 
using either half or the whole screen (if 
available). 
Info BannerSet to On or Off. When on, displays the program name (if the 
broadcaster offers this service). Displays for up to four seconds 
when the channel is changed or the DISPLAY button is pressed.