Sony Klv 32ex400 Operating Instructions

							D:\Cmengs JOB\SONY TV\SY0251_T1 (Rev-3)\7239131_GB\COV.fm
4-167-239-13(1)
KLV-40/32EX600/55/46/40/32EX500/46/40/32EX400/32/26/22EX300/40/32NX500/32/26NX400
4-167-239-13(1)
LCD Colour TV
Operating Instructions
Start-up Guide
Operating the TV
Using Optional Equipment
Using MENU Functions
Additional Information
KLV-55EX500 / 46EX500 / 46EX400 / 40EX600 / 40EX500 / 40EX400 / 40NX500 / 32EX600 / 32EX500 
KLV-32EX400 / 32EX300 / 32NX500 / 32NX400 / 26EX300 / 26NX400 / 22EX300
 
						

							2 GB
KLV-40/32EX600/55/46/40/32EX500/46/40/32EX400/32/26/22EX300/40/32NX500/32/26NX400
4-167-239-13(1)
Thank you for choosing this Sony product.
Before operating the TV, please read this manual 
thoroughly and retain it for future reference.
The illustrations used in this manual are of the 
KLV-32EX300 unless otherwise stated.
The Euro/South Africa converter plug should be fitted 
as follows.
1Insert the power 
supply or CEE7 
plug in to the 
converter plug.
2Use an appropriate 
screwdriver to 
attach the screw 
tightly without 
damaging the 
screw head.
3TEST: Grip the 
converter plug, and 
pull the VDE cord 
set/transformer to 
ensure it is fully 
secure, if not then 
increase the torque 
setting and further 
tighten.
Re-test.
The converter plug 
is now ready for 
use.
Attach the supplied plug adaptor.• HDMI, the HDMI logo and High-Definition 
Multimedia Interface are trademarks or registered 
trademarks of HDMI Licensing LLC.
 “BRAVIA” and  are trademarks of Sony 
Corporation.
Introduction
Notice for customers in South Africa
Notice for customers in India
Trademark information
 
						

							D:\Cmengs JOB\SONY TV\SY0251_T1 (Rev-
3)\7239131_GB\COVTOC.fmmasterpage:Left
KLV-40/32EX600/55/46/40/32EX500/46/40/32EX400/32/26/22EX300/40/32NX500/32/26NX400
4-167-239-13(1)
3 GB
Table of Contents
Start-up Guide
Checking the accessories .................................. 4
1: Attaching the stand.........................................4
2: Connecting an antenna/cable/VCR ................5
3: Preventing the TV from toppling over .............5
4: Bundling the cables ........................................ 6
5: Performing the initial set-up............................ 6
Watching TV .......................................................6
Adjusting the viewing angle of the TV ................6
Adjust the angle left and right (swivel) ............. 6
Adjust the angle back and forth (tilt) ................ 6
Detaching the stand from the TV ........................7
Safety information ..............................................8
Precautions ........................................................ 9
Operating the TV
Overview of the remote ....................................10
Overview of the TV buttons and indicators ....... 12
Using Optional Equipment
Connecting optional equipment ........................ 13
Viewing pictures from the connected 
equipment......................................................... 14
Viewing Twin Picture ........................................ 15
Viewing PIP (Picture in Picture)........................ 15
Using MENU Functions
Navigating through menus ............................... 16
Playing back photo/music/video via USB ......... 16
Using BRAVIA Sync with Control for HDMI ..... 17
Settings adjustment.......................................... 18
Picture .............................................................18
Sound ..............................................................19
Screen .............................................................20
Channel Set-up ...............................................22
Parental Lock ..................................................23
Set-up..............................................................23
Eco ..................................................................25
Additional Information
Installing the accessories (Wall-Mount 
Bracket) ............................................................ 26
TV installation dimensions table......................26
Screw and hook locations diagram/table .......28
Troubleshooting ............................................... 29
Specifications ................................................... 31
Before operating the TV, please read “Safety information” (page 8). Retain this manual for future reference.
 
						

							D:\Cmengs JOB\SONY TV\SY0251_T1 (Rev-
3)\7239131_GB\STU.fmmasterpage:Left
4 GB
KLV-40/32EX600/55/46/40/32EX500/46/40/32EX400/32/26/22EX300/40/32NX500/32/26NX400
4-167-239-13(1)
Start-up Guide
Checking the accessories
AC power cord (For KLV-40/32EX600/
KLV-55/46EX500/KLV-46EX400)
Cable holder (1) (For KLV-40/32EX600/
KLV-40/32NX500/KLV-32/26NX400)
Stand (1) and screws (8) (For KLV-40/32EX600/
KLV-40/32EX500/KLV-40/32NX500/
KLV-32/26NX400)
Stand (1) and screws (7) (For KLV-40/32EX400/
KLV-32/26EX300)
Stand (1) and screws (6) (For KLV-22EX300)
Stand (1) and screws (4) (For KLV-55/46EX500/
KLV-46EX400)
Remote RM-GA018 (1) (For KLV-40/32EX600/
KLV-55/46/40/32EX500/KLV-40/32NX500/
KLV-32/26NX400)
Remote RM-GA019 (1) (For KLV-46/40/32EX400/
KLV-32/26/22EX300)
Size AAA batteries (R03 type) (2)
To insert batteries into the remote
BKLV-40/32EX600/KLV-55/46/40/32EX500/
KLV-40/32NX500/KLV-32/26NX400
BKLV-46/40/32EX400/KLV-32/26/22EX300
1: Attaching the stand
• Refer to the supplied stand leaflet for proper 
attachment for some TV models.
BKLV-40/32EX600
BKLV-55/46/40/32EX500/KLV-46/40/32EX400/
KLV-32/26EX300/KLV-40/32NX500/
KLV-32/26NX400
Slide the cover to 
open
Push and lift the cover to open
 
						

							5 GB
Start-up Guide
KLV-40/32EX600/55/46/40/32EX500/46/40/32EX400/32/26/22EX300/40/32NX500/32/26NX400
4-167-239-13(1)
BKLV-22EX300
• Fix the TV to the stand according to the arrow marks 
 that guide the screw holes using the supplied 
screws.
• This TV is very heavy, so two or more people should 
place the TV onto the stand.
• If using an electric screwdriver, set the tightening 
torque at approximately 1.5 N·m (15 kgf·cm).
• Ensure the AC power cord is away from screw holes 
during stand installation to avoid damage to the AC 
power cord.
2: Connecting an antenna/
cable/VCR
 Connecting cables are not supplied.
Connecting an antenna/cable
3: Preventing the TV from 
toppling over
1Install a wood screw (4 mm in diameter, not 
supplied) in the TV stand.
2Install a machine screw (M4 × 16, not 
supplied) into the screw hole of the TV.
3Tie the wood screw and the machine screw 
with a strong cord (not supplied).
z• An optional Sony support belt kit is used to secure the 
TV. Contact your nearest Sony service centre to 
purchase a kit. Have your TV model name ready for 
reference.
8
Antenna cable 
8
Connecting an antenna/cable and VCR
Antenna cable
Antenna cable
AV cable
VCR
 
						

							6 GB
KLV-40/32EX600/55/46/40/32EX500/46/40/32EX400/32/26/22EX300/40/32NX500/32/26NX400
4-167-239-13(1)
4: Bundling the cables
• Do not bundle the AC power cord together with 
other cables.
• The illustration may differ from that of the actual 
rear panel, and the AC power cord may already be 
connected, depending on the screen size.
5: Performing the initial 
set-up
 You can also tune channels manually (page 22).
 Language options vary depending on model.
Watching TV
1Press 1 on the TV to turn on the TV.
2Press the number buttons or PROG +/– to 
select a TV channel.
3Press 2 +/– to adjust the volume.
Adjusting the viewing angle 
of the TV
This TV can be adjusted within the angles 
shown below.
BKLV-40/32EX600/KLV-55/46/40/32EX500/
KLV-40/32NX500/KLV-32/26NX400
BKLV-22EX300
* The shapes of AC power plug and AC power outlet 
differ depending on the region.
**When the TV is in standby mode (the 1 (standby) 
indicator on the TV front panel is red), press "/1 on 
the remote to turn on the TV.
3
Follow the instructions on the screen.
“Location”: Select “Home” for the best 
TV settings to use the TV in the home.
332211
332211
KLV-40/32NX500/KLV-32/26NX400
KLV-40/32EX600/
KLV-55/46EX500/
KLV-46EX400 KLV-40/32EX600
Confi
rm
Confirm
“Programme Sorting”: If you want to 
change the order of channels, follow the 
steps in “Programme Sorting” (page 22). 
Press MENU to exit.
Adjust the angle left and right 
(swivel)
Adjust the angle back and forth 
(tilt)
Top view
Front
Front Left view
 
						

							7 GB
Start-up Guide
KLV-40/32EX600/55/46/40/32EX500/46/40/32EX400/32/26/22EX300/40/32NX500/32/26NX400
4-167-239-13(1)
BKLV-40/32NX500/KLV-32/26NX400
Detaching the stand from the 
TV
 Do not remove the stand for any reason other than to 
wall-mount the TV.
BKLV-40/32EX600
BKLV-55/46/40/32EX500/
KLV-46/40/32EX400/KLV-32/26EX300/
KLV-40/32NX500/KLV-32/26NX400
BKLV-22EX300
0° 6°
5
234 1
0°6°
 
						

							8 GB
KLV-40/32EX600/55/46/40/32EX500/46/40/32EX400/32/26/22EX300/40/32NX500/32/26NX400
4-167-239-13(1)
Safety information
Installation/Set-upInstall and use the TV set in accordance with 
the instructions below in order to avoid any 
risk of fire, electrical shock or damage and/or 
injuries.
Installation The TV set should be installed near an 
easily accessible AC power outlet.
 Place the TV set on a stable, level surface 
to avoid it from falling down and cause 
personal injury or damage to the TV.
 Only qualified service personnel should 
carry out wall installations.
 For safety reasons, it is strongly 
recommended that you use Sony 
accessories, including:
– KLV-40/32EX600/
KLV-55/46/40/32EX500/
KLV-46/40/32EX400/
KLV-32EX300/KLV-40/32NX500:
Wall-mount bracket SU-WL500 or 
SU-WL50B
– KLV-32NX400:
Wall-mount bracket SU-WL500
– KLV-26/22EX300/KLV-26NX400:
Wall-mount bracket SU-WL100
 Be sure to use the screws supplied with 
the Wall-mount bracket when attaching 
the mounting hooks to the TV set. The 
supplied screws are designed as indicated 
by illustration when measured from the 
attaching surface of the mounting hook.
The diameter and length of the screws 
differ depending on the Wall-mount 
bracket model.
Use of screws other than those supplied 
may result in internal damage to the TV 
set or cause it to fall, etc.
Transporting Before transporting the TV set, 
disconnect all cables.
 Two or more people are needed to 
transport a large TV set.
 When transporting the TV set by hand, 
hold it as shown below. Do not put stress 
on the LCD panel and the frame around 
the screen. When lifting or moving the TV set, hold it 
firmly from the bottom.
 When transporting the TV set, do not 
subject it to jolts or excessive vibration.
 When transporting the TV set for repairs 
or when moving, pack it using the original 
carton and packing material.
Ventilation Never cover the ventilation holes or insert 
anything in the cabinet.
 Leave space around the TV set as shown 
below.
 It is strongly recommended that you use a 
Sony wall-mount bracket in order to 
provide adequate air-circulation.
Installed on the wall
Installed with stand
 To ensure proper ventilation and prevent 
the collection of dirt or dust:
– Do not lay the TV set flat, install 
upside down, backwards, or sideways.
– Do not place the TV set on a shelf, rug, 
bed or in a closet.
– Do not cover the TV set with a cloth, 
such as curtains, or items such as 
newspapers, etc.– Do not install the TV set as shown 
below.
AC power cordHandle the AC power cord and outlet as 
follows in order to avoid any risk of fire, 
electrical shock or damage and/or injuries:
– The shape of AC power plug, which is 
supplied with the TV set, varies 
depending on the regions. Be sure to 
connect the appropriate supplied AC 
power cord with the plug that fits into the 
AC power outlet.
– Use only Sony supplied AC power cords, 
not those of other brands.
– Insert the plug fully into the AC power 
outlet.
– Operate the TV set on a 110-240 V AC 
supply only (South Africa and Tunisia 
only: 220-240 V AC).
– When wiring cables, be sure to unplug the 
AC power cord for your safety and take 
care not to catch your feet on the cables.
– Disconnect the AC power cord from the 
AC power outlet before working on or 
moving the TV set.
– Keep the AC power cord away from heat 
sources.
– Unplug the AC power plug and clean it 
regularly. If the plug is covered with dust 
and it picks up moisture, its insulation 
may deteriorate, which could result in a 
fire. 
Notes Do not use the supplied AC power cord on 
any other equipment.
 Do not pinch, bend, or twist the AC power 
cord excessively. The core conductors 
may be exposed or broken.
 Do not modify the AC power cord.
 Do not put anything heavy on the AC 
power cord.
 Do not pull on the AC power cord itself 
when disconnecting the AC power cord.
 Do not connect too many appliances to 
the same AC power outlet.
 Do not use a poor fitting AC power outlet.
Prohibited Usage
Do not install/use the TV set in locations, 
environments or situations such as those 
listed below, or the TV set may malfunction 
and cause a fire, electrical shock, damage 
and/or injuries.
Location:Outdoors (in direct sunlight), at the seashore, 
on a ship or other vessel, inside a vehicle, in 
medical institutions, unstable locations, near 
water, rain, moisture or smoke.
Screw (supplied with the 
Wall-mount bracket)
Mounting Hook
Hook attachment on rear of 
TV set Min. ~ 26 TV: 6.5 ~ 10mm
32 TV ~ Max.: 8 ~ 12mm
KLV-26NX400 KLV-26/22EX300
KLV-55/46/40/32EX500/
KLV-46/40/32EX400/
KLV-32EX300/
KLV-40NX500
KLV-40/32EX600/
KLV-32NX500/
KLV-32/26NX400
KLV-55/46/40/32EX500/
KLV-46/40/32EX400/
KLV-32/26/22EX300/
KLV-40NX500
KLV-40/32EX600/
KLV-32NX500/
KLV-32NX400
30 cm
10 cm 10 cm
10 cm
Leave at least this space around 
the set.
30 cm
10 cm
10 cm6 cm
Leave at least this space around the 
set.
Air circulation is blocked.
WallWall
 
						

							9 GB
KLV-40/32EX600/55/46/40/32EX500/46/40/32EX400/32/26/22EX300/40/32NX500/32/26NX400
4-167-239-13(1)
Environment:Places that are hot, humid, or excessively 
dusty; where insects may enter; where it 
might be exposed to mechanical vibration, 
near flammable objects (candles, etc). The 
TV set shall not be exposed to dripping or 
splashing and no objects filled with liquids, 
such as vases, shall be placed on the TV.
Situation:Do not use when your hands are wet, with the 
cabinet removed, or with attachments not 
recommended by the manufacturer. 
Disconnect the TV set from AC power outlet 
and antenna during lightning storms.
Broken pieces:  Do not throw anything at the TV set. The 
screen glass may break by the impact and 
cause serious injury.
 If the surface of the TV set cracks, do not 
touch it until you have unplugged the AC 
power cord. Otherwise electric shock may 
result. 
When not in use If you will not be using the TV set for 
several days, the TV set should be 
disconnected from the AC power for 
environmental and safety reasons. 
 As the TV set is not disconnected from the 
AC power when the TV set is just turned 
off, pull the plug from the AC power 
outlet to disconnect the TV set 
completely.
 However, some TV sets may have 
features that require the TV set to be left 
in standby to work correctly.
For children
 Do not allow children to climb on the TV 
set.
 Keep small accessories out of the reach of 
children, so that they are not mistakenly 
swallowed.
If the following problems 
occur...
Turn off the TV set and unplug the AC 
power cord immediately if any of the 
following problems occur.
Ask your dealer or Sony service centre to 
have it checked by qualified service 
personnel.
When:– AC power cord is damaged.
– Poor fitting of AC power outlet.
– TV set is damaged by being dropped, hit 
or having something thrown at it.
– Any liquid or solid object falls through 
openings in the cabinet.
About LCD Monitor 
Temperature
When the LCD Monitor is used for an 
extended period, the panel surrounds become 
warm. You may feel hot when touching there 
by the hand.
Precautions
Viewing the TV View the TV in moderate light, as 
viewing the TV in poor light or during 
long period of time, strains your eyes.
 When using headphones, adjust the 
volume so as to avoid excessive levels, as 
hearing damage may result.
LCD Screen Although the LCD screen is made with 
high-precision technology and 99.99% or 
more of the pixels are effective, black dots 
may appear or bright points of light (red, 
blue, or green) may appear constantly on 
the LCD screen. This is a structural 
property of the LCD screen and is not a 
malfunction.
 Do not push or scratch the front filter, or 
place objects on top of this TV set. The 
image may be uneven or the LCD screen 
may be damaged.
 If this TV set is used in a cold place, a 
smear may occur in the picture or the 
picture may become dark. This does not 
indicate a failure. These phenomena 
disappear as the temperature rises.
 Ghosting may occur when still pictures 
are displayed continuously. It may 
disappear after a few moments.
 The screen and cabinet get warm when 
this TV set is in use. This is not a 
malfunction.
 The LCD screen contains a small amount 
of liquid crystal. Some fluorescent tubes 
used in this TV set also contain mercury 
(except for LED backlight LCD TV). 
Follow your local ordinances and 
regulations for disposal.
Handling and cleaning the 
screen surface/cabinet of the 
TV set
Be sure to unplug the AC power cord 
connected to the TV set from AC power 
outlet before cleaning.
To avoid material degradation or screen 
coating degradation, observe the following 
precautions.
 To remove dust from the screen surface/
cabinet, wipe gently with a soft cloth. If 
dust is persistent, wipe with a soft cloth 
slightly moistened with a diluted mild 
detergent solution.
 Do not spray water or detergent directly 
on the TV set. It may drip to the bottom of 
the screen or exterior parts, and may cause 
a malfunction.
 Never use any type of abrasive pad, 
alkaline/acid cleaner, scouring powder, or 
volatile solvent, such as alcohol, benzene, 
thinner or insecticide. Using such 
materials or maintaining prolonged 
contact with rubber or vinyl materials 
may result in damage to the screen surface 
and cabinet material.
 Periodic vacuuming of the ventilation 
openings is recommended to ensure to 
proper ventilation.
 When adjusting the angle of the TV set, 
move it slowly so as to prevent the TV set 
from moving or slipping off from its table 
stand.
Optional EquipmentKeep optional components or any equipment 
emitting electromagnetic radiation away 
from the TV set. Otherwise picture distortion 
and/or noisy sound may occur.
(Caution about handling the 
remote control)
Notes
 Observe the correct polarity when 
inserting batteries.
 Do not use different types of batteries 
together or mix old and new batteries.
 Dispose of batteries in an 
environmentally friendly way. Certain 
regions may regulate the disposal of 
batteries. Please consult your local 
authority.
 Handle the remote with care. Do not drop 
or step on it, or spill liquid of any kind 
onto it.
 Do not place the remote in a location near 
a heat source, a place subject to direct 
sunlight, or a damp room.
 
						

							KLV-40/32EX600/55/46/40/32EX500/46/40/32EX400/32/26/22EX300/40/32NX500/32/26NX400
4-167-239-13(1)
10 GB
Operating the TV
Overview of the remote
1"/1 – TV standbyPress to turn the TV on or to switch to standby mode.
2BRAVIA SyncN/x/m/M/./>: You can operate the BRAVIA Sync-compatible 
equipment that is connected to the TV. Some other buttons on the remote control 
may also operate BRAVIA Sync equipment.
SYNC MENU: Press to display the BRAVIA Sync Menu and then select 
connected HDMI equipment from “HDMI Device Selection”.
The following options can be selected from BRAVIA Sync Menu:
“Device Control”: Use the “Device Control” menu to operate equipment that is 
compatible with Control for HDMI. Select options from “Home (Menu)”, 
“Options” and “Content List” to operate the equipment.
“Speaker”: Selects “TV Speaker” or “Audio System” to output the TV’s sound 
from the TV speakers or connected audio equipment.
“TV Control”: Use the “TV Control” menu to operate the TV from the “MENU” 
or “TOOLS” menu.
“Return to TV”: Selects this option to return to TV programme.
THEATRE: You can set Theatre mode to on or off. When Theatre mode is set to 
on, the optimum sound quality (if the TV is connected with an audio system using 
an HDMI cable) and picture quality for film-based contents are automatically set.
 If you turn the TV off, Theatre mode is also turned off.
 When you change the “Scene Select” setting, Theatre mode turns off 
automatically.
 “Control for HDMI” (BRAVIA Sync) is only available with the connected Sony 
equipment that has the BRAVIA Sync or BRAVIA Theatre Sync logo or is 
compatible with Control for HDMI.
3 – Wide ModeChanges the picture size. Press repeatedly to select the desired wide mode 
(page 11).
4 – Favourite listPress to display or exit the Favourite list that you have specified. You can store up 
to 10 channels and/or external inputs in your Favourite list.
5/  – Info / Text reveal Displays information. Press once to display information about the programme/
input you are viewing. Press again to remove the display from the screen.
 In Text mode: Reveals hidden information (e.g. answers to a quiz).
6F/f/G/g/  – Item select / Enter Selects or adjusts items.
 Confirms selected items.
 When playing a photo file: Press G to select the previous file. Press g to select 
the next file.
When playing a music/video file: Press   to pause/start the playback. Press and 
hold G/g to fast forward/fast reverse, then release the button at the point where 
you want to resume playback. Press F to start playback from the beginning of 
the current file. Press f to go to the next file.
7TOOLSPress to display a list that contains shortcuts to some setting menus.
The listed options vary depending on the current input and content.
8MENUDisplays or cancels the menu.
9Coloured buttonsWhen the coloured buttons are available, an operation guide appears on the screen.
q;Number buttons Selects channels. For channel numbers 10 and above, enter the next digit 
quickly (page 22).
 In Text mode: Enters the three digit page number to select the page.
qa – Previous channelReturns to the previous channel or input watched (for more than 15 seconds).
qsAUDIO – Dual Sound (page 20)
qdPROG +/–/ /
 Selects the next (+) or previous (–) channel.
 In Text mode: Selects the next ( ) or previous ( ) page.
z The number 5, N, 
PROG + and AUDIO 
buttons have tactile dots. 
Use the tactile dots as 
references when operating 
the TV.