Sony Klv 26bx300 Operating Instructions

							F:\SONY STM\Sony STM 2009 Jobs\Grp U1\Revision Bracket 2 U1\JC090000_4168830112 Rev GB
U1\4168830112\010COV.fm
4-168-830-11(2)
KLV-40BX400/KLV-40BX401/KLV-32/26/22BX300/KLV-32/26/22BX301
4-168-830-11(2)
LCD Colour TV
Operating Instructions
Start-up Guide
Operating the TV
Using Optional Equipment
Using MENU Functions
Additional Information
KLV-40BX400/40BX401/32BX300/32BX301/26BX300/26BX301/22BX300/22BX301
 
						

							2 GB
KLV-40BX400/KLV-40BX401/KLV-32/26/22BX300/KLV-32/26/22BX301
4-168-830-11(2)
Thank you for choosing this Sony product.
Before operating the TV, please read this manual 
thoroughly and retain it for future reference.
The illustrations used in this manual are of the 
KLV-32BX300 unless otherwise stated.
The Euro/South Africa converter plug should be fitted 
as follows.
1Insert the power supply or 
CEE7 plug in to the 
converter plug.
2Use an appropriate 
screwdriver to attach the 
screw tightly without 
damaging the screw head.
3TEST: Grip the converter 
plug, and pull the VDE cord 
set/transformer to ensure it 
is fully secure, if not then 
increase the torque setting 
and further tighten.
Re-test.
The converter plug is now ready for use.
Attach the supplied plug adaptor.• HDMI, the HDMI logo and High-Definition 
Multimedia Interface are trademarks or registered 
trademarks of HDMI Licensing LLC.
 “BRAVIA” and  are trademarks of Sony 
Corporation.
This product is ENERGY RATING qualified in the 
“Home” mode. ENERGY RATING is a programme 
designed to promote energy efficient products and 
practices.
 When the TV is initially set up, it is designed to 
meet ENERGY RATING requirements while 
maintaining optimum picture quality.
 Changes to certain features, settings and 
functionalities of this TV (e.g. Picture/Sound and 
Eco settings) can slightly change the power 
consumption.
Depending upon such changed settings, the power 
consumption may vary which possibly could exceed 
the stated energy rating. To reset the TV to ENERGY 
RATING qualified settings, select “Home” mode 
from the initial set-up procedure in “Factory Settings” 
under the “Set-up” menu.
IMPORTANT INFORMATION
If a television is not positioned in a sufficiently stable 
location, it can be potentially hazardous due to falling. 
Many injuries, particularly to children, can be avoided 
by taking simple precautions such as:
 Using cabinets or stands recommended by the 
manufacturer of the television.
 Only using furniture that can safely support the 
television.
 Ensuring the television is not overhanging the edge 
of the supporting furniture.
 Not placing the television on tall furniture (for 
example, cupboards or bookcases) without 
anchoring both the furniture and the television to a 
suitable support.
 Not standing the televisions on cloth or other 
materials placed between the television and 
supporting furniture.
 Educating children about the dangers of climbing 
on furniture to reach the television or its controls.
Introduction
Notice for customers in South Africa
Notice for customers in India
Trademark information
Notes for Australia and New Zealand 
model
 
						

							F:\SONY STM\Sony STM 2009 Jobs\Grp U1\Revision Bracket 2 
U1\JC090000_4168830112 Rev GB U1\4168830112\010COVTOC.fmmasterpage:Left
KLV-40BX400/KLV-40BX401/KLV-32/26/22BX300/KLV-32/26/22BX301
4-168-830-11(2)
3 GB
Table of Contents
Start-up Guide
Checking the accessories ..................................4
1: Attaching the stand.........................................4
2: Connecting an antenna/cable/VCR ................ 5
3: Preventing the TV from toppling over .............5
4: Performing the initial set-up ............................6
Watching TV ....................................................... 6
Detaching the stand from the TV ........................6
Safety information ..............................................7
Precautions ........................................................8
Operating the TV
Overview of the remote ...................................... 9
Overview of the TV buttons and indicators....... 11
Using Optional Equipment
Connecting optional equipment ........................ 12
Viewing pictures from the connected 
equipment......................................................... 13
Viewing Twin Picture ........................................ 14
Viewing PIP (Picture in Picture)........................ 14
Using MENU Functions
Navigating through menus ............................... 15
Listening to the FM Radio ................................ 15
Playing back photo/music/video via USB ......... 17
Using BRAVIA Sync with Control for HDMI ..... 18
Settings adjustment.......................................... 19
 Picture ............................................................19
 Sound .............................................................20
 Screen ............................................................21
 Channel Set-up ..............................................23
 Parental Lock .................................................24
 Set-up.............................................................25
 Eco .................................................................26
Additional Information
Installing the accessories 
(Wall-Mount Bracket) ....................................... 27
TV installation dimensions table......................28
Screw and hook locations diagram/table .......29
Troubleshooting ............................................... 30
Specifications ................................................... 32
Before operating the TV, please read “Safety information” (page 7). Retain this manual for future reference.
 
						

							F:\SONY STM\Sony STM 2009 Jobs\Grp U1\Revision Bracket 2 
U1\JC090000_4168830112 Rev GB U1\4168830112\030STU.fmmasterpage:Left
4 GB
KLV-40BX400/KLV-40BX401/KLV-32/26/22BX300/KLV-32/26/22BX301
4-168-830-11(2)
Start-up Guide
Checking the accessories
Stand (1) and screws (7) (For KLV-40BX400/
KLV-40BX401/KLV-32/26BX300/KLV-32/26BX301)
Stand (1) and screws (6) (For KLV-22BX300/
KLV-22BX301)
Remote RM-GA019 (1)
Size AAA batteries (R03 type) (2)
To insert batteries into the remote
1: Attaching the stand
•Refer to the supplied stand leaflet for proper 
attachment for some TV models.
BKLV-40BX400/KLV-40BX401/KLV-32/
26BX300/KLV-32/26BX301BKLV-22BX300/KLV-22BX301
• Fix the TV to the stand according to the arrow marks 
 that guide the screw holes using the supplied 
screws.
• This TV is very heavy, so two or more people should 
place the TV onto the stand.
• If using an electric screwdriver, set the tightening 
torque at approximately 1.5 N·m (15 kgf·cm).
• Ensure the AC power cord is away from screw holes 
during stand installation to avoid damage to the AC 
power cord.
Push and lift the cover to open.
 
						

							5 GB
Start-up Guide
KLV-40BX400/KLV-40BX401/KLV-32/26/22BX300/KLV-32/26/22BX301
4-168-830-11(2)
2: Connecting an antenna/
cable/VCR
 Connecting cables are not supplied.
Connecting an antenna/cable
3: Preventing the TV from 
toppling over
1Install a wood screw (4 mm in diameter, not 
supplied) in the TV stand.
2Install a machine screw (M4 × 16, not 
supplied) into the screw hole of the TV.
3Tie the wood screw and the machine screw 
with a strong cord (not supplied).
z• An optional Sony support belt kit is used to secure the 
TV. Contact your nearest Sony service centre to 
purchase a kit. Have your TV model name ready for 
reference.
8
8
Connecting an antenna/cable and VCR
Antenna cable
Antenna cable
Antenna cable 
AV cable
VCR
 
						

							6 GB
KLV-40BX400/KLV-40BX401/KLV-32/26/22BX300/KLV-32/26/22BX301
4-168-830-11(2)
4: Performing the initial
set-up
 You can also tune channels manually (page 23).
 Language options vary depending on model.
Watching TV
1Press 1 on the TV to turn on the TV.
2Press the number buttons or PROG +/– to 
select a TV channel.
3Press 2 +/– to adjust the volume.
Detaching the stand from the 
TV
• Do not remove the stand for any reason other than to 
wall-mount the TV.
BKLV-40BX400/KLV-40BX401/KLV-32/
26BX300/KLV-32/26BX301
BKLV-22BX300/KLV-22BX301
* The shapes of AC power plug and AC power outlet 
differ depending on the region.
**When the TV is in standby mode (the 1 (standby) 
indicator on the TV front panel is red), press "/1 on 
the remote to turn on the TV.
3
Follow the instructions on the screen.
“Location”: Select “Home” for the best 
TV settings to use the TV in the home.
“Programme Sorting”: If you want to 
change the order of channels, follow the 
steps in “Programme Sorting” (page 23).
Conf
ir
m
Confirm
 
						

							7 GB
KLV-40BX400/KLV-40BX401/KLV-32/26/22BX300/KLV-32/26/22BX301
4-168-830-11(2)
Safety information
Installation/Set-upInstall and use the TV set in accordance with 
the instructions below in order to avoid any 
risk of fire, electrical shock or damage and/or 
injuries.
Installation The TV set should be installed near an 
easily accessible AC power outlet.
 Place the TV set on a stable, level surface 
to avoid it from falling down and cause 
personal injury or damage to the TV.
 Only qualified service personnel should 
carry out wall installations.
 For safety reasons, it is strongly 
recommended that you use Sony 
accessories, including:
– KLV-40BX400/KLV-40BX401/
KLV-32BX300/KLV-32BX301:
Wall-mount bracket SU-WL500 or 
SU-WL50B
– KLV-26/22BX300/KLV-26/22BX301:
Wall-mount bracket SU-WL100
 Be sure to use the screws supplied with 
the Wall-mount bracket when attaching 
the mounting hooks to the TV set. The 
supplied screws are designed so that they 
are 8 mm to 12 mm in length when 
measured from the attaching surface of 
the mounting hook.
The diameter and length of the screws 
differ depending on the Wall-mount 
bracket model.
Use of screws other than those supplied 
may result in internal damage to the TV 
set or cause it to fall, etc.
Transporting Before transporting the TV set, 
disconnect all cables.
 Two or more people are needed to 
transport a large TV set.
 When transporting the TV set by hand, 
hold it as shown below. Do not put stress 
on the LCD panel. When lifting or moving the TV set, hold it 
firmly from the bottom.
 When transporting the TV set, do not 
subject it to jolts or excessive vibration.
 When transporting the TV set for repairs 
or when moving, pack it using the original 
carton and packing material.
Ventilation Never cover the ventilation holes or insert 
anything in the cabinet.
 Leave space around the TV set as shown 
below.
 It is strongly recommended that you use a 
Sony wall-mount bracket in order to 
provide adequate air-circulation.
Installed on the wall
Installed with stand
 To ensure proper ventilation and prevent 
the collection of dirt or dust:
– Do not lay the TV set flat, install 
upside down, backwards, or sideways.
– Do not place the TV set on a shelf, rug, 
bed or in a closet.
– Do not cover the TV set with a cloth, 
such as curtains, or items such as 
newspapers, etc.
– Do not install the TV set as shown 
below.
AC power cordHandle the AC power cord and outlet as 
follows in order to avoid any risk of fire, 
electrical shock or damage and/or injuries:
– The shape of AC power plug, which is 
supplied with the TV set, varies 
depending on the regions. Be sure to 
connect the appropriate supplied AC 
power cord with the plug that fits into the 
AC power outlet.
– Use only Sony supplied AC power cords, 
not those of other brands.
– Insert the plug fully into the AC power outlet.– Operate the TV set on a 110-240 V AC 
supply only. (New Zealand, South Africa 
and Tunisia only: 220-240 V AC)
– When wiring cables, be sure to unplug the 
AC power cord for your safety and take 
care not to catch your feet on the cables.
– Disconnect the AC power cord from the 
AC power outlet before working on or 
moving the TV set.
– Keep the AC power cord away from heat 
sources.
– Unplug the AC power plug and clean it 
regularly. If the plug is covered with dust 
and it picks up moisture, its insulation may 
deteriorate, which could result in a fire. 
Notes Do not use the supplied AC power cord on 
any other equipment.
 Do not pinch, bend, or twist the AC power 
cord excessively. The core conductors 
may be exposed or broken.
 Do not modify the AC power cord.
 Do not put anything heavy on the AC 
power cord.
 Do not pull on the AC power cord itself 
when disconnecting the AC power cord.
 Do not connect too many appliances to 
the same AC power outlet.
 Do not use a poor fitting AC power outlet.
Prohibited UsageDo not install/use the TV set in locations, 
environments or situations such as those 
listed below, or the TV set may malfunction 
and cause a fire, electrical shock, damage 
and/or injuries.
Location:Outdoors (in direct sunlight), at the seashore, 
on a ship or other vessel, inside a vehicle, in 
medical institutions, unstable locations, near 
water, rain, moisture or smoke.
Environment:Places that are hot, humid, or excessively 
dusty; where insects may enter; where it 
might be exposed to mechanical vibration, 
near flammable objects (candles, etc). The 
TV set shall not be exposed to dripping or 
splashing and no objects filled with liquids, 
such as vases, shall be placed on the TV.
Situation:Do not use when your hands are wet, with the 
cabinet removed, or with attachments not 
recommended by the manufacturer. 
Disconnect the TV set from AC power outlet 
and antenna during lightning storms.
Screw (supplied with the 
Wall-mount bracket)
Mounting Hook
Hook attachment on rear of 
TV set 8mm - 12mm
KLV-26/22BX300/
KLV-26/22BX301KLV-40BX400/
KLV-40BX401/
KLV-32BX300/
KLV-32BX301
30 cm
10 cm 10 cm
10 cm
Leave at least this space around 
the set.
30 cm
10 cm
10 cm6 cm
Leave at least this space around the 
set.
Air circulation is blocked.
WallWall
Continued
 
						

							8 GB
KLV-40BX400/KLV-40BX401/KLV-32/26/22BX300/KLV-32/26/22BX301
4-168-830-11(2)
Broken pieces:  Do not throw anything at the TV set. The 
screen glass may break by the impact and 
cause serious injury.
 If the surface of the TV set cracks, do not 
touch it until you have unplugged the AC 
power cord. Otherwise electric shock may 
result. 
When not in use
 If you will not be using the TV set for 
several days, the TV set should be 
disconnected from the AC power for 
environmental and safety reasons. 
 As the TV set is not disconnected from the 
AC power when the TV set is just turned 
off, pull the plug from the AC power 
outlet to disconnect the TV set 
completely.
 However, some TV sets may have 
features that require the TV set to be left 
in standby to work correctly.
For children Do not allow children to climb on the TV 
set.
 Keep small accessories out of the reach of 
children, so that they are not mistakenly 
swallowed.
If the following problems 
occur...
Turn off the TV set and unplug the AC 
power cord immediately if any of the 
following problems occur.
Ask your dealer or Sony service centre to 
have it checked by qualified service 
personnel.
When:– AC power cord is damaged.
– Poor fitting of AC power outlet.
– TV set is damaged by being dropped, hit 
or having something thrown at it.
– Any liquid or solid object falls through 
openings in the cabinet.
About LCD Monitor 
Temperature
When the LCD Monitor is used for an 
extended period, the panel surrounds become 
warm. You may feel hot when touching there 
by the hand.
Precautions
Viewing the TV View the TV in moderate light, as 
viewing the TV in poor light or during 
long period of time, strains your eyes.
LCD Screen Although the LCD screen is made with 
high-precision technology and 99.99% or 
more of the pixels are effective, black dots 
may appear or bright points of light (red, 
blue, or green) may appear constantly on 
the LCD screen. This is a structural 
property of the LCD screen and is not a 
malfunction.
 Do not push or scratch the front filter, or 
place objects on top of this TV set. The 
image may be uneven or the LCD screen 
may be damaged.
 If this TV set is used in a cold place, a 
smear may occur in the picture or the 
picture may become dark. This does not 
indicate a failure. These phenomena 
disappear as the temperature rises.
 Ghosting may occur when still pictures 
are displayed continuously. It may 
disappear after a few moments.
 The screen and cabinet get warm when 
this TV set is in use. This is not a 
malfunction.
 The LCD screen contains a small amount 
of liquid crystal. Some fluorescent tubes 
used in this TV set also contain mercury. 
Follow your local ordinances and 
regulations for disposal.
Handling and cleaning the 
screen surface/cabinet of the 
TV set
Be sure to unplug the AC power cord 
connected to the TV set from AC power 
outlet before cleaning.
To avoid material degradation or screen 
coating degradation, observe the following 
precautions.
 To remove dust from the screen surface/
cabinet, wipe gently with a soft cloth. If 
dust is persistent, wipe with a soft cloth 
slightly moistened with a diluted mild 
detergent solution.
 Do not spray water or detergent directly 
on the TV set. It may drip to the bottom of 
the screen or exterior parts, and may cause 
a malfunction.
 Never use any type of abrasive pad, 
alkaline/acid cleaner, scouring powder, or 
volatile solvent, such as alcohol, benzene, 
thinner or insecticide. Using such 
materials or maintaining prolonged 
contact with rubber or vinyl materials 
may result in damage to the screen surface 
and cabinet material.
 Periodic vacuuming of the ventilation 
openings is recommended to ensure to 
proper ventilation.
 When adjusting the angle of the TV set, 
move it slowly so as to prevent the TV set 
from moving or slipping off from its table 
stand.
Optional EquipmentKeep optional components or any equipment 
emitting electromagnetic radiation away 
from the TV set. Otherwise picture distortion 
and/or noisy sound may occur.
(Caution about handling the 
remote control)
Notes
 Observe the correct polarity when 
inserting batteries.
 Do not use different types of batteries 
together or mix old and new batteries.
 Dispose of batteries in an 
environmentally friendly way. Certain 
regions may regulate the disposal of 
batteries. Please consult your local 
authority.
 Handle the remote with care. Do not drop 
or step on it, or spill liquid of any kind 
onto it.
 Do not place the remote in a location near 
a heat source, a place subject to direct 
sunlight, or a damp room.
 
						

							Operating the TV
9 GB
KLV-40BX400/KLV-40BX401/KLV-32/26/22BX300/KLV-32/26/22BX301
4-168-830-11(2)
Operating the TV
Overview of the remote
1"/1 – TV standbyPress to turn the TV on or to switch to standby mode.2BRAVIA SyncN/x/m/M/./>: You can operate the BRAVIA Sync-compatible 
equipment that is connected to the TV. Some other buttons on the remote control 
may also operate BRAVIA Sync equipment.
SYNC MENU: Press to display the BRAVIA Sync Menu and then select 
connected HDMI equipment from “HDMI Device Selection”. 
The following options can be selected from BRAVIA Sync Menu:
“Device Control”: Use the “Device Control” menu to operate equipment that is 
compatible with Control for HDMI. Select options from “Home (Menu)”, 
“Options” and “Content List” to operate the equipment.
“Speaker”: Selects “TV Speaker” or “Audio System” to output the TV’s sound 
from the TV speakers or connected audio equipment.
“TV Control”: Use the “TV Control” menu to operate the TV from the “MENU” 
or “TOOLS” menu.
“Return to TV”: Selects this option to return to TV programme.
THEATRE: You can set Theatre mode to on or off. When Theatre mode is set to 
on, the optimum sound quality (if the TV is connected with an audio system using 
an HDMI cable) and picture quality for film-based contents are automatically set.
 If you turn the TV off, Theatre mode is also turned off.
 When you change the “Scene Select” setting, Theatre mode turns off 
automatically.
 “Control for HDMI” (BRAVIA Sync) is only available with the connected Sony 
equipment that has the BRAVIA Sync or BRAVIA Theatre Sync logo or is 
compatible with Control for HDMI.
3 – Wide ModeChanges the picture size. Press repeatedly to select the desired wide mode 
(page 10).
4 – Favourite listPress to display or exit the Favourite list that you have specified. You can store up 
to 10 channels and/or external inputs in your Favourite list.
5/  – Info / Text reveal Displays information. Press once to display information about the programme/
input you are viewing. Press again to remove the display from the screen.
 In Text mode: Reveals hidden information (e.g. answers to a quiz).
6F/f/G/g/  – Item select / Enter Selects or adjusts items.
 Confirms selected items.
 When playing a photo file: Press G to select the previous file. Press g to select 
the next file.
When playing a music/video file: Press   to pause/start the playback. Press and 
hold G/g to fast forward/fast reverse, then release the button at the point where 
you want to resume playback. Press F to start playback from the beginning of 
the current file. Press f to go to the next file.
7TOOLSPress to display a list that contains shortcuts to some setting menus.
The listed options vary depending on the current input and content.
8MENUDisplays or cancels the menu.9Coloured buttonsWhen the coloured buttons are available, an operation guide appears on the screen.q;Number buttons Selects channels. For channel numbers 10 and above, enter the next digit 
quickly (page 23).
 In Text mode: Enters the three digit page number to select the page.
qa – Previous channelReturns to the previous channel or input watched (for more than 15 seconds).qsAUDIO – Dual Sound (page 21)
qdPROG +/–/ /
 Selects the next (+) or previous (-) channel.
 In Text mode: Selects the next ( ) or previous ( ) page.
qf2 +/– – VolumeAdjusts volume.qg% – MutePress to mute the sound. Press again to restore the sound.
z The number 5, N, 
PROG + and AUDIO 
buttons have tactile dots. Use 
the tactile dots as references 
when operating the TV.
Continued
 
						

							10 GB
KLV-40BX400/KLV-40BX401/KLV-32/26/22BX300/KLV-32/26/22BX301
4-168-830-11(2)
To change the Wide Mode
For TV, Video, Component or HDMI (except 
PC input)
* Parts of the top and bottom of the picture may be cut 
off.
 You cannot select “Normal” for HD signal source 
pictures.
PC or HDMI PC Input (PC timing)
 Some options may not be available depending on the 
PC input signal.
qh/ – TextIn Text mode: Displays Text broadcast.
Each time you press /, the display changes cyclically as follows:
Text t Text over the TV picture (mix mode) t No Text (exit the Text service)
qjRETURN Returns to the previous screen of any displayed menu.
 When playing a photo/music/video file: Press to stop the playback (the display 
returns to the file or thumbnail view).
qkSCENE – Scene Select modePress to display the “Scene Select” menu. When you select the desired scene
option, the optimum sound and picture quality for selected scene are automatically
set. The options you can select may vary. Unavailable options are greyed out.
“Cinema”: Delivers theatre-like picture and dynamic sound.
“Sports”: Delivers realistic picture with surround sound like in a stadium.
“Photo”: Delivers picture that reproduces the texture and colour of a printed 
photo.
“Music”: Delivers dynamic and clear sound effects like at a concert.
“Game”: Delivers the best picture and sound quality for fullest game playing 
enjoyment.
“Graphics”: Delivers clearer detailed pictures to reduce fatigue for prolonged 
viewing.
“General”: Current user settings.
“Auto”: Delivers optimum picture and sound quality which is automatically set 
according to input source. There may not be any effect depending on the connected 
equipments.
 When you set Theatre mode (page 9) to on, the “Scene Select” setting switches 
to “Cinema” automatically.
ql – Twin Picture / PIP (page 14)
w;a – TV mode
Exit Text mode, or switches to a TV display when displaying external input.wa/  – Input select / Text hold Displays the connected equipment list and selects the input source (page 13).
 In Text mode: Holds the current page.
Wide Zoom*Enlarges the centre portion of the 
picture. The left and right edges of 
the picture are stretched to fill the 
16:9 screen. 
NormalDisplays the 4:3 picture in its original 
size. Side bars are shown to fill the 
16:9 screen.
FullStretches the 4:3 picture horizontally 
to fill the 16:9 screen.
Zoom*Displays cinemascopic (letter box 
format) broadcasts in the correct 
proportions.NormalDisplays the picture in its original 
pixel size. Bars are shown at the top, 
bottom, and both sides for small 
picture.
Full 1Stretches the original picture to fill 
the screen vertically, keeping its 
original horizontal-to-vertical aspect 
ratio.
Full 2Stretches the Full 1 picture 
horizontally to fill the 16:9 screen.