Sony Kds 60a2000 Operating Instructions

							KDS-50/55/60A2000 2-686-615-13(1)
SXRD Projection TV
Operating Instructions
http://www.sony.net/
Printed in U.S.A.
2-686-615-13(1)
KDS-50A2000
KDS-55A2000 
KDS-60A2000
© 2006 Sony Corporation
™
For Your Convenience
Please contact Sony directly if you:· Have questions on the use of your television after reading your manual
· Experience dif culty operating your television
Contact Sony Customer Support at:
 http://www.sony.com/tvsupport
 
or to speak with a support representative:
 United States  Canada
  1-800-222-SONY (7669)  1-877-899-SONY (7669)
  8:00 AM - 10:00 PM (EST ) Mon - Fri  8:00 AM - 6:00 PM (Eastern)
  10:30 AM - 7:15 PM (EST ) Sat - Sun  8:00 AM - 5:00 PM ( Western)
Sony will work to resolve your questions more quickly than your retailer or place of purchase.
Please Do Not Return the Product to the Store
26866151131SXRD_ENcov3.indd   126866151131SXRD_ENcov3.indd   19/27/2006   11:30:50 AM9/27/2006   11:30:50 AM
 
						

							2
KDS-50A2000/KDS-55A2000/KDS-60A2000
2-686-615-13(1)
F:\Worker\SONY SXRD-A EN 13(1)\2686615131\010BCO.fmmasterpage:3 columns Right
Owner’s RecordThe model and serial numbers are located at the rear of the TV. Record 
these numbers in the spaces provided below. Refer to them whenever 
you call upon your Sony dealer regarding this product.
Model No. 
Serial No. 
For Your Convenience
Please contact Sony directly if you:z  
Have questions on the use of your television after reading your manual
z    Experience difficulty operating your television
Contact Sony Customer Support at:
http://www.sony.com/tvsupport
oor to speak with a support representative:
United States
1-800-222-SONY (7669)
8:00 AM - 10:00 PM (EST) Mon - Fri
10:30 AM - 7:15 PM (EST) Sat - SunCanada
1-877-899-SONY (7669)
8:00 AM - 6:00 PM (Eastern)
8:00 AM - 5:00 PM (Western)
Sony will work to resolve your questions more quickly than your retailer or place of purchase.
Please Do Not Return the Product to the Store
 
						

							3
KDS-50A2000/KDS-55A2000/KDS-60A2000
2-686-615-13(1)
F:\Worker\SONY SXRD-A EN 13(1)\2686615131\010REG.fmmasterpage:3 columns Right
WARNINGTo reduce the risk of fire or electric shock, do not expose this apparatus to 
rain or moisture.
This symbol is intended to alert the user to the presence 
of uninsulated “dangerous voltage” within the 
product’s enclosure that may be of sufficient 
magnitude to constitute a risk of electric shock to 
persons.
This symbol is intended to alert the user to the presence 
of important operating and maintenance (servicing) 
instructions in the literature accompanying the 
appliance.
The apparatus shall not be exposed to dripping or splashing and no objects 
filled with liquids, such as vases, shall be placed on the apparatus.
CAUTIONTo prevent electric shock, do not use this polarized AC plug with an 
extension cord, receptacle or other outlet unless the blades can be fully 
inserted to prevent blade exposure.
Note on Caption VisionThis TV provides display of TV closed captioning in accordance with 
§15.119 of the FCC rules.
NOTIFICATIONThis equipment has been tested and found to comply with the limits for a 
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits 
are designed to provide reasonable protection against harmful interference 
in a residential installation. This equipment generates, uses and can radiate 
radio frequency energy and, if not installed and used in accordance with the 
instructions, may cause harmful interference to radio communications. 
However, there is no guarantee that interference will not occur in a 
particular installation. If this equipment does cause harmful interference to 
radio or television reception, which can be determined by turning the 
equipment off and on, the user is encouraged to try to correct the 
interference by one or more of the following measures:sReorient or relocate the receiving antenna.
sIncrease the separation between the equipment and receiver.
sConnect the equipment into an outlet on a circuit different from that 
to which the receiver is connected.
sConsult the dealer or an experienced radio/TV technician for help.
For Customers in CanadaThis Class B digital apparatus complies with Canadian ICES-003.
SafetysOperate the TV only on 120 V AC.
sThe plug is designed, for safety purposes, to fit into the wall outlet 
only one way. If you are unable to insert the plug fully into the outlet, 
contact your dealer.
sIf any liquid or solid object should fall inside the cabinet, unplug the 
TV immediately and have it checked by qualified service personnel 
before operating it further.
sIf you will not be using the TV for several days, disconnect the power 
by pulling the plug itself. Never pull on the cord.
sFor details concerning safety precautions, see “Important Safety 
Instructions” on page 5.
InstallingsThe TV should be installed near an easily accessible power outlet.
sTo prevent internal heat buildup, do not block the ventilation 
openings.
sDo not install the TV in a hot or humid place, or in a place subject to 
excessive dust or mechanical vibration.
sUse the TV at temperatures between 41°F (5°C) and 95°F (35°C).
sIf the TV is transported directly from a cold to a warm location, or if 
the room temperature changes suddenly, the picture may be blurred 
or show poor color due to moisture condensation. In this case, please 
wait a few hours to let the moisture evaporate before turning on the 
TV.
sTo obtain the best picture, do not expose the screen to direct 
illumination or direct sunlight. It is recommended to use spot lighting 
directed down from the ceiling or to cover the windows that face the 
screen with opaque drapery. It is desirable to install the TV in a room 
where the floor and walls are not of a reflective material.
sSee pages 11 and 12 for more information on the installation.
CAUTIONUse the following Sony appliance(s) only with the following TV STAND.
Use with other TV STAND may cause instability and possibly result in 
injury.
To CustomersSufficient expertise is required for installing the specified product. Be sure 
to subcontract the installation to Sony dealers or licensed contractors and 
pay adequate attention to safety during the installation.
Declaration of ConformityTrade Name: SONY
Model: KDS-50A2000/KDS-55A2000/KDS-60A2000
Responsible Party: Sony Electronics Inc.
Address: 16530 Via Esprillo, 
San Diego, CA 92127 U.S.A.
Telephone Number: 858-942-2230
This device complies with part 15 of the FCC rules. Operation is subject 
to the following two conditions: (1) This device may not cause harmful 
interference, and (2) this device must accept any interference received, 
including interference that may cause undesired operation.
CAUTIONRISK OF ELECTRIC SHOCKDO NOT OPEN
ATTENTIONRISQUE DE CHOC ELECTRIQUE,
NE PAS OUVRIR
PRECAUCIONRIESGO DE CHOQUE ELECTRICONO ABRIR
Pursuant to FCC regulations, you are cautioned that any changes or 
modifications not expressly approved in this manual could void your 
authority to operate this equipment.
SONY APPLIANCE MODEL NO.
KDS-50A2000 KDS-55A2000 KDS-60A2000
SONY TV STAND 
MODEL NO.SU-RS11M SU-RS11X
(Continued)
 
						

							4
KDS-50A2000/KDS-55A2000/KDS-60A2000
2-686-615-13(1)
F:\Worker\SONY SXRD-A EN 13(1)\2686615131\010REG.fmmasterpage:3 columns Right
NoteThis digital television is capable of receiving analog basic and digital basic 
television programming by direct connection to a cable system providing 
such programming. Certain premium, advanced and interactive digital 
cable services such as video-on-demand, a cable operator’s enhanced 
program guide and data-enhanced television services may require the use 
of a set-top box. For more information call your local cable operator.
This television includes a QAM demodulator which should allow you to 
receive unscrambled digital cable television programming via subscription 
service to a cable service provider. Availability of digital cable television 
programming in your area depends on the type of programming and signal 
provided by your cable service provider.
Trademark InformationTruSurround XT, SRS and ( ) symbol are 
trademarks of SRS Labs, Inc. TruSurround XT 
technology is incorporated under license from SRS 
Labs, Inc.
Manufactured under license from BBE Sound, Inc.
Licensed by BBE Sound, Inc. under one or more of the 
following US patents: 5510752, 5736897. BBE and 
BBE symbol are registered trademarks of BBE Sound, Inc.
Macintosh is a trademark licensed to Apple Computer, Inc., registered in 
the U.S.A and other countries.
Blu-ray Disc is a trademark.
SXRD, WEGA, Grand WEGA, Steady Sound, Digital Reality Creation 
and CineMotion are registered trademarks of Sony Corporation.
This TV is manufactured under license from Dolby 
Laboratories. “Dolby” and the double-D symbol are 
trademarks of Dolby Laboratories.
This TV incorporates High-Definition 
Multimedia Interface (HDMI™) technology. 
HDMI, the HDMI logo and High-Definition Multimedia Interface are 
trademarks or registered trademarks of HDMI Licensing LLC.
 
						

							5
KDS-50A2000/KDS-55A2000/KDS-60A2000
2-686-615-13(1)
F:\Worker\SONY SXRD-A EN 13(1)\2686615131\010REG.fmmasterpage:3 columns Right
Important Safety Instructions
1) Read these instructions.
2) Keep these instructions.
3) Heed all warnings.
4) Follow all instructions.
5) Do not use this apparatus near water. 
6) Clean only with dry cloth. 
7) Do not block any ventilation openings. Install in 
accordance with the manufacturer’s 
instructions.
8) Do not install near any heat sources such as 
radiators, heat registers, stoves, or other 
apparatus (including amplifiers) that produce 
heat.
9) Do not defeat the safety purpose of the polarized 
or grounding-type plug. A polarized plug has 
two blades with one wider than the other. A 
grounding type plug has two blades and a third 
grounding prong. The wide blade or the third 
prong are provided for your safety. If the 
provided plug does not fit into your outlet, 
consult an electrician for replacement of the 
obsolete outlet.
10) Protect the power cord from being walked on or 
pinched particularly at plugs, convenience 
receptacles, and the point where they exit from 
the apparatus.
11) Only use attachments/accessories specified by 
the manufacturer.12) Use only with the cart, stand, tripod, bracket, or 
table specified by the manufacturer, or sold with 
the apparatus. When a cart is used, use caution 
when moving the cart/apparatus combination to 
avoid injury from tip-over.
13) Unplug this apparatus during lightning storms 
or when unused for long periods of time.
14) Refer all servicing to qualified service 
personnel. Servicing is required when the 
apparatus has been damaged in any way, such 
as power-supply cord or plug is damaged, 
liquid has been spilled or objects have fallen 
into the apparatus, the apparatus has been 
exposed to rain or moisture, does not operate 
normally, or has been dropped.
sBe sure to observe the TV’s “For Safety” 
section on page 6.
Antennas
Outdoor Antenna GroundingIf an outdoor antenna is installed, follow the precautions below. An 
outdoor antenna system should not be located in the vicinity of overhead 
power lines or other electric light or power circuits, or where it can come 
in contact with such power lines or circuits. 
WHEN INSTALLING AN OUTDOOR ANTENNA SYSTEM, 
EXTREME CARE SHOULD BE TAKEN TO KEEP FROM 
CONTACTING SUCH POWER LINES OR CIRCUITS AS CONTACT 
WITH THEM IS ALMOST INVARIABLY FATAL.
Be sure the antenna system is grounded so as to provide some protection 
against voltage surges and built-up static charges. 
Section 810 of the National Electrical Code (NEC) in USA and Section 54 
of the Canadian Electrical Code in Canada provides information with 
respect to proper grounding of the mast and supporting structure, 
grounding of the lead-in wire to an antenna discharge unit, size of 
grounding conductors, location of antenna discharge unit, connection to 
grounding electrodes, and requirements for the grounding electrode.
(Continued)
 
						

							6
KDS-50A2000/KDS-55A2000/KDS-60A2000
2-686-615-13(1)
F:\Worker\SONY SXRD-A EN 13(1)\2686615131\010REG.fmmasterpage:3 columns Right
Antenna Grounding According to the NECRefer to section 54-300 of Canadian Electrical Code for Antenna 
Grounding.
Cleaning
sClean the cabinet of the TV with a dry soft 
cloth. To remove dust from the screen, wipe it 
gently with a soft cloth. Stubborn stains may be 
removed with a cloth slightly dampened with 
solution of mild soap and warm water. Never 
use strong solvents such as thinner or benzine for cleaning. If the 
picture becomes dark after using the TV for a long period of time, it 
may be necessary to clean the inside of the TV. Consult qualified 
service personnel.
sUnplug the AC power cord when cleaning this unit. Cleaning this 
unit with a plugged AC power cord may result in electric shock.
On Contamination on the Screen Surface The screen surface has a special coating to reduce reflections. To prevent 
screen damage, clean the screen as follows:
sClean the screen with a soft cloth. 
sTo remove hard contamination, use a cloth moistened with a 
solution of mild soap and warm water. Do not spray cleaning 
solution directly onto the TV. It should only be sprayed to moisten 
the cleaning cloth.
sDo not use any type of abrasive pad, alkaline cleaner, acid cleaner, 
scouring powder, chemical cloth, or solvent such as alcohol, 
benzene or thinner, as these may scratch the screen’s coating. 
Service
Damage Requiring ServiceDo not attempt to service the set by yourself since opening 
the cabinet may expose you to dangerous voltage or other 
hazards. 
Unplug the set from the wall outlet and refer servicing to 
qualified service personnel.
Replacement PartsWhen replacement parts are required, be sure the service technician 
certifies in writing that he has used replacement parts specified by the 
manufacturer that have the same characteristics as the original parts.
Unauthorized substitutions may result in fire, electric shock or other 
hazards.
See “Replacing the Lamp” on page 51.
For Safety
Be Careful When Moving the 
TV
When you place the TV in position, be careful 
not to drop it on your foot or fingers.
Watch your footing while installing the TV.
Carry the TV in the Specified 
Manner
If you carry the TV in a manner other than the 
specified manner and without the specified number 
of persons, it may drop and a serious injury may be 
caused. Be sure to follow the instructions 
mentioned below.
sCarry the TV with the specified number of persons (see page 11).
sHold the TV tightly when carrying it.
sBefore carrying the TV, disconnect any accessories or cables.
About the TVAlthough the TV is made with high-precision technology, black dots may 
appear or bright points of light (red, blue, or green) may appear constantly 
on the screen. This is a structural property of the panel and is not a defect.
InstallationsIf direct sunlight or other strong illumination shines on the screen, 
part of the screen may appear white due to reflections from behind 
the screen. This is a structural property of the TV.
Do not expose the screen to direct illumination or direct sunlight.
sThe picture quality may be affected by your viewing position. For 
the best picture quality, install your TV according to 
“Recommended Viewing Area” on page 13.
sWhen installing your TV against a wall, keep it at least 4 inches (10 
cm) away from the wall.
Projection LampsYour TV uses a projection lamp as its light source. It is time to 
replace the lamp with a new one (not supplied) when:
 the message, “Projection lamp is nearing end of life. Please 
replace the lamp.” appeared on the screen,
 the lamp replacement indicator on the front panel blinks in red,
 screen images become dark,
 no image appears on the display after prolonged use.
sIn rare instances, the bulb may pop inside the lamp unit, but the lamp 
unit is designed to contain all of broken glass pieces inside the lamp 
unit. (See “Replacing the Lamp” on page 51.)
Cooling FanThis TV uses a cooling fan. You may hear the noise of fan running, 
depending on the placement of your TV. The noise may be more noticeable 
during the night or when the background noise level is low.
Objects and Ventilation HolesNever push objects of any kind into the unit through 
the cabinet slots as they may touch dangerous 
voltage points or short out parts that could result in 
a fire or electric shock. Never spill liquid of any 
kind on the unit. 
Disposal of Used BatteriesTo preserve our environment, dispose of used batteries according to your 
local laws or regulations.
sClean the rear cover area of the TV regularly. Dust in the rear cover 
area may cause a problem with the cooling system of the TV set.
Antenna lead-in wire
Ground clampsAntenna discharge uni
t(NEC Section 810-20)
Grounding conductors 
(NEC section 810-21)
Power service grounding 
electrode system (NEC Art 
250 Par t H) Ground clamp
Electrical 
service 
equipment
NEC: National 
Electrical Code
sWhen the lamp eventually burns out, you may hear a noticeable pop 
sound. This is normal and is inherent in this type of lamp.
POWERST
D
/DU
O
 
						

							7
F:\Worker\SONY SXRD-A EN 13(1)\2686615131\010COVTOC.fmmasterpage:3 columns Right
KDS-50A2000/KDS-55A2000/KDS-60A2000
2-686-615-13(1)
Contents
Getting Started
Welcome .............................................................8
Features ........................................................8
Notes on the TV ............................................9
Screen.........................................................10
Projection Lamp ..........................................10
Installing the TV ...............................................11
Carrying Your TV ........................................11
Take Precaution during Installation.............11
Preventing the TV from Toppling Over .......11
When Installing Your TV against a Wall......12
Recommended Viewing Area .....................13
Connecting the TV ...........................................14
Cable System and VHF/UHF 
Antenna System..........................................14
Cable Box/Digital Cable Box 
and Antenna................................................14
Cable Box/Digital Cable Box .......................15
Satellite Receiver and Cable/Antenna ........15
VCR and Cable ...........................................16
VCR and Cable Box/Digital Cable Box .......17
When Connecting to Optional Equipment..... 18
Front Panel .................................................18
Rear Panel .................................................. 19
Setting Up the Channel List - Initial Setup ....21
Basic Operations
Using the Remote Control ..............................22
Programming the Remote Control .................26
Using Other Equipment with 
Your Remote Control....................................... 28
TV Controls  .....................................................31
Using the Menus
Overview of MENU ...........................................32
Picture Settings ...............................................34
Sound Settings ................................................37
Screen Settings................................................39
Channel Settings .............................................41
Parental Lock Settings ....................................42
Setup Settings.................................................. 45
PC Settings....................................................... 49
Other Information
Replacing the Lamp ........................................ 51
How to Replace the Lamp .......................... 51
Troubleshooting.............................................. 55
Remote Control .......................................... 55
Picture ........................................................ 56
Sound ......................................................... 57
Channels .................................................... 57
General ...................................................... 58
PC Input Signal Reference Chart................... 60
Specifications.................................................. 61
Index................................................................. 62
 
						

							8
F:\Worker\SONY SXRD-A EN 13(1)\2686615131\020GET.fmmasterpage:3 columns Right
KDS-50A2000/KDS-55A2000/KDS-60A2000
2-686-615-13(1)
Getting Started
Welcome
Thank you for purchasing this Sony SXRDTM projection TV. This manual is 
for models KDS-50A2000, KDS-55A2000 and KDS-60A2000.
FeaturesSome of the features that you will enjoy with your new TV include:
❑SXRDTM: SXRD is a Silicon X-tal Reflective Display technology that 
delivers high-level resolution, greater contrast ratio, faster response 
speed and film-like reproduction compared to other conventional 
devices.
❑WEGA Engine: Delivers superb picture quality from any video source 
by minimizing the signal deterioration caused by digital-to-analog 
conversion and stabilizing the signal processing. This engine features 
unique Sony technology, including:
DRC
® (Digital Reality Creation)-MF V1: Unlike conventional 
line doublers, the DRC Multifunction feature replaces the signal’s 
NTSC waveform with the near-HD equivalent by digital mapping 
processing. The DRC Palette option lets you customize the level 
of detail (Reality) and smoothness (Clarity).
❑Integrated HDTV: You can watch digital televised programs and enjoy 
the improved audio/video quality offered by these programs.
❑Advanced Iris: Automatically detects the brightness of the screen. By 
adjusting the iris shutter, this feature can provide you with the best 
contrast and brightness from one scene to the next for your TV viewing.
❑Wide Screen Mode: Allows you to watch 4:3 normal broadcasts in 
wide screen mode (16:9 aspect ratio).
❑CineMotion®: Using the reverse 3-2 pull down technology, the 
CineMotion feature provides smoother picture movement when playing 
back movies or other video sources on film.
❑MENU: Sony’s unique user interface provides easy access to the 
popular and useful TV functions such as external inputs (switch among 
connected equipment), favorite channels (create a list of your favorite 
channels), cable channels (view cable channels), antenna channels 
(view antenna channels) or to customize your TV settings.
❑Parental Control: Downloadable digital rating and V-Chip technology 
allows parents to block unsuitable programming from younger viewers.
❑Component Video Inputs: Offers a high-quality video for DVD (480p, 
480i) and digital set-top box (1080i, 720p, 480p, 480i) connections.
❑S VIDEO Inputs: Provides high-quality image from connected 
equipment.
 
						

							Getting Started
9
Getting Started
KDS-50A2000/KDS-55A2000/KDS-60A2000
2-686-615-13(1)
F:\Worker\SONY SXRD-A EN 13(1)\2686615131\020GET.fmmasterpage:3 columns Right
❑Favorite Channels: Using the MENU function, you can view and 
select from a list of up to 16 favorite channels without leaving the 
current channel.
❑Steady Sound®: Equalizes volume levels so there is consistent output 
between programs and commercials.
❑PC Input: Allows you to connect your PC and display the PC screen on 
your TV.
❑HDMI (High-Definition Multimedia Interface): Provides an 
uncompressed, all-digital audio/video interface between this TV and 
any HDMI-equipped audio/video component, such as a set-top box, 
Blu-ray Disc
TM Player (BD), DVD player, and A/V receiver. HDMI 
supports enhanced, or high-definition video, plus two-channel digital 
audio.
Notes on the TVTo enjoy clear picture
❑
Prevent sunlight or other light sources from shining directly onto the 
screen.
❑The screen surface is easily scratched. Do not rub, touch, or tap it with 
sharp or abrasive objects (see “On Contamination on the Screen 
Surface” on page 6).
When not using the TV for a long period of time
❑
Unplug the AC power cord from the outlet if you anticipate not using 
the TV for more than a week.
When turning off the power
❑
The cooling fan will continue to operate for about two minutes. Allow 
several minutes before unplugging from the outlet or switching the 
breaker off.
On moisture condensation
❑
If your TV is moved directly from a cold to a warm location or is placed 
in a humid room, or if the room temperature changes suddenly, the 
picture may blur or show poor color. This is caused by moisture 
condensation on the lenses inside. Wait a few hours to let the moisture 
evaporate before turning on the TV. When the condensation has 
evaporated, the picture will return to normal.
 
						

							Getting Started
10
KDS-50A2000/KDS-55A2000/KDS-60A2000
2-686-615-13(1)
F:\Worker\SONY SXRD-A EN 13(1)\2686615131\020GET.fmmasterpage:3 columns Right
ScreenTo minimize reflection, the screen surface has a special coating.  
Inappropriate cleaning methods could damage the screen surface. Special 
care is required.
Cleaning the Screen Surface
Dust and dirt on the screen can affect the picture quality. To dust off the 
screen use a soft cloth. Be sure to follow the cleaning instruction on page 6 
for stubborn stains and dirt.
Temporary Image Retention
When high contrast non-moving images such as station logos and channel 
numbers are displayed for a long period of time, there may be some image 
retention on the screen. This is only a temporary condition. Turning off the 
power for a while or letting the TV run on another channel will eliminate the 
retained image.
Projection LampYour TV uses a projection lamp as its light source. As with any lamp, it has a 
lifespan and needs to be replaced when the LAMP LED blinks or the screen 
becomes darker. Your TV also has a function to display a message 
“Projection lamp is nearing end of life. Please replace the lamp.” to let you 
know that the lamp has reached its expected lifespan. Note the following:
❑After turning on your TV, it may take a while (1 minute or less) before 
the picture appears.
❑When the projection lamp wears out, the screen goes dark. Replace the 
lamp with a new Sony XL-5200 replacement lamp (not supplied).
❑After the lamp is replaced, set the Lamp Replacement option in the 
Setup settings (see page 47).
To replace the lamp, see 
page 51. 
✍Until you set the Lamp Replacement option, a message announcing 
that the lamp is at the end of its life will appear every time you turn on 
your TV.
✍The light emitted from the lamp is quite bright when your TV is in use. 
To avoid eye discomfort or injury, do not look into the light housing when 
the power is on.