Sony Kdl 52w3000 Operating Instructions

11
Getting Started
2. Locating Inputs and Outputs
Left Side
ItemDescription
1Headphone jackConnects to your headphones. If your headphones do not match the jack, use a suitable 
plug adapter (not supplied).
~
 While headphones are connected, the TV speakers are muted.
2VIDEO IN 2
VIDEO/R-AUDIO-
L (MONO)Connects to the composite video and audio output jacks on your camcorder or other 
video equipment such as a VCR or video game equipment.
~
 If you have mono equipment, connect its audio output jack to the...

12
Rear
ItemDescription
1PC IN 
(RGB/AUDIO) Connects to a personal computer’s video output connector using a HD15-HD15 cable 
with ferrite core (analog RGB, not supplied). Can also be connected to other analog RGB 
equipment.
See “PC Input Signal Reference Chart” on page 16 for the signals that can be displayed.
~
 For some Apple Macintosh computers, it may be necessary to use an adapter (not 
supplied). If this is the case, connect the adapter to the computer before connecting the 
HD15-HD15 cable with...

13
Getting Started
2HDMI IN 1
HDMI/
R-AUDIO-LHDMI (High-Definition Multimedia Interface) provides an uncompressed, all-digital 
audio/video interface between this TV and any HDMI-equipped audio/video equipment, 
such as a set-top box, DVD player, Blu-ray Disc Player, A/V receiver as well as PC. 
HDMI supports enhanced, or high-definition video, plus digital audio.
3HDMI IN 3
HDMIIf the equipment has a DVI jack and not an HDMI jack, connect the DVI jack to the 
HDMI IN 1 (with DVI-to-HDMI cable or...

14 3. Connecting the TV
You can enjoy high-definition and standard-
definition digital programming (if available in 
your area) along with standard-definition analog 
programming.
~
 This TV is capable of receiving unscrambled digital 
programming for both cable (QAM and 8VSB) and 
external VHF/UHF antenna (ATSC).
 It is strongly recommended that you connect the 
antenna/cable input using the 75-ohm coaxial cable 
(not supplied) to receive optimum picture quality. A 
300-ohm twin lead cable can be easily...

15
Getting Started
Shown with DVI Connection
~
 If the equipment has a DVI jack and not an HDMI jack, connect the DVI jack to the HDMI IN 1 (with DVI-to-HDMI 
cable or adapter) jack and connect the audio jack to the AUDIO IN (L/R) jacks of HDMI IN 1. For details, see 
page 13.
AUD I O
L
R
RGB
P
C
 IN
AUD I O
13IN1IN
AUDIO
L
R
Rear of TV
AUDIO-R 
(red) AUDIO-L 
(white)
Audio cable DVI-to-HDMI 
cableHD cable box/
HD satellite boxCATV/Satellite 
antenna cable
VIDEO INAUDIO OUT(VAR/FIX)
DIGITAL
OUT...

16
Use the TV as a monitor for your PC.
Shown below with the HD15 to HD15 connection. This TV can also be connected to a PC with DVI or 
HDMI output. (Refer to the separate Quick Setup Guide.)
~
 Connect the PC IN jack to the PC using the HD15-
HD15 cable with ferrite core (analog RGB, not 
supplied) and audio cable (page 12).  If the PC is connected to the TV and no signal has been 
input from the PC for more than 30 seconds, the TV 
enters the standby mode automatically (page 45).
PC Input Signal...

17
Getting Started
~
 Refer to the Quick Setup Guide (supplied) when connecting other equipment to your TV.
Other Equipment
VIDEO INAUDIO OUT(VAR/FIX)
DIGITAL
OUT
(OPTICAL)
COMPONENT IN(1080p/1080I/       
720p/480p/480I)
S VIDEO
VIDEO
AUDIO
L(MONO)
RAUDIOL
RAUDIOL
DMex/SERVICE
R
PR
PB
Y
1132
AUDIO
L
R
RGB
PC IN
AUDIO
13IN
VIDEO IN
IN
2
2VIDEO
AUD I O
L(MONO)
R
VIDEO INAUDIO OUT(VAR/FIX)
DIGITAL
OUT
(OPTICAL)
COMPONENT IN(1080p/1080i/       
720p/480p/480i)
S VIDEO
VIDEO
AUDIO
L(MONO)
RAUDIOL
R
11
RGB
PC...

18
This TV is equipped with BRAVIA Theatre Sync. 
The HDMI Control function enables BRAVIA 
Theatre Sync to allow communication between 
Sony TV’s and Sony equipment. Only Sony 
equipment with HDMI Control capability is 
supported.
To Connect HDMI Control Equipment
Use an HDMI cable that bears the HDMI logo for 
connection. See page 17 or see the HDMI 
connection shown in the Quick Setup Guide 
provided with the TV documentation.
Setting the HDMI Control
In order for the HDMI Control function to operate,...

19
Getting Started
4. Setting Up the Channel List 
– Initial Setup
The Initial Setup screen appears when you turn 
on the TV for the first time.
After you finish connecting the TV, you can run 
Initial Setup to create a list of available analog 
and digital channels if you have connected an 
antenna or cable directly to the TV’s VHF/UHF/
CABLE input.
You will be prompted to select the language of 
your choice to be used for all the on-screen 
settings.
Use the remote control to navigate through the...

20
Using the TV Features
Remote Control and TV Controls/Indicators
Insert two size AA batteries (supplied) by matching 
e and E on the batteries to the diagram inside the 
battery compartment of the remote control.
Inserting Batteries into the Remote Control
Remote Control and TV Controls
ButtonDescription
1DISPLAYPress once to display the information pertaining to the 
channel and/or program when available. The OSD (On Screen 
Display) will time out in a few seconds or press again to 
immediately turn...