Sony Kdl 52v4000 Operating Instructions

							
© 2008 Sony Corporation3-298-969-12(1)
U
KDL-52V4000/52V42xx
KDL-46V4000/46V42xx
KDL-40V4000/40V42xx
KDL-40S40xx/40U40xx
KDL-40L4000
LCD Digital Colour TV
Operating Instructions 
 
						

							
2 GB
NOTICE FOR 
CUSTOMERS IN THE 
UNITED KINGDOM
A moulded plug complying with BS1363 
is fitted to this equipment for your safety 
and convenience.
Should the fuse in the plug supplied need 
to be replaced with the same rating of fuse 
approved by ASTA or BSI to BS 1362 (i.e., 
marked with   or  ) must be used.
When an alternative type of plug is used it 
should be fitted with the same rating of 
fuse, otherwise the circuit should be 
protected by a 13 AMP FUSE at the 
distribution board.
If the plug supplied with this equipment 
has a detachable fuse cover, be sure to 
attach the fuse cover after you change the 
fuse. Never use the plug without the fuse 
cover. If you should lose the fuse cover, 
please contact your nearest Sony service 
station.
How to replace the fuseOpen the fuse compartment with a blade 
screwdriver, and replace the fuse.
Please refer to the illustration that actually 
equipped with the product.
Introduction
Thank you for choosing this Sony product. 
Before operating the TV, please read this 
manual thoroughly and retain it for future 
reference.
Notes on Digital TV 
function
s Functions related to Digital TV ( ) 
will work only in countries or areas 
where a compatible DVB-C (MPEG2) 
cable service is available. Confirm 
with your local dealer whether the area 
you are in receives DVB-T signals, or 
ask your cable provider whether its 
DVB-C cable service is compatible 
with this TV. 
s Your cable provider may charge a fee 
for their services, or require you to 
agree to its terms and conditions of 
business.
s This TV set complies with DVB-T and 
DVB-C specifications, but 
compatibility with future DVB-T 
digital terrestrial and DVB-C digital 
cable broadcasts are not guaranteed.
s Some Digital TV functions may not be 
available in some countries/areas and 
DVB-C cable may not operate 
correctly with some providers. For a list of compatible cable providers, 
refer to the support web site:
http://support.sony-europe.com/TV/
DVBC/
Trademark information
 is a registered trademark of the DVB 
Project
Manufactured under license from BBE 
Sound, Inc. Licensed by BBE Sound, Inc. 
under one or more of the following US 
patents: 5510752, 5736897. BBE and BBE 
symbol are registered trademarks of BBE 
Sound, Inc.
Manufactured under license from Dolby 
Laboratories. “Dolby” and the double-D 
symbol are trademarks of Dolby 
Laboratories.
HDMI, the HDMI logo and High-
Definition Multimedia Interface are 
trademarks or registered trademarks of 
HDMI Licensing LLC.
“BRAVIA” and   are 
trademarks of Sony Corporation.
s The illustrations used in this manual 
are of the KDL-40V4000 unless 
otherwise stated.
s The “xx” that appears on the model 
name, corresponds to two numeric 
digits related to design or colour 
variation.
FUSE
FUSE
 
						

							
3 GB
Table of Contents
Start-up Guide  4
Safety Information ............................................................................................................................ 9
Precautions .................................................................................................................... ................. 10
Remote Control and TV Controls/Indicators................................................................................ 12
Watching TV
Watching TV .................................................................................................................... ................ 16
Using the Digital Electronic Programme Guide (EPG)  ....................................................... 18
Using the Digital Favourite List  ............................................................................................ 20
Using Optional Equipment
Connecting Optional Equipment.................................................................................................. .21
Viewing Pictures from Connected Equipment............................................................................. 23
Using BRAVIA Sync (Control for HDMI) ....................................................................................... 24
Using Menu Functions
Navigating through menus ....................................................................................................... ..... 25
TV Settings Menu ............................................................................................................... ............ 26
Additional Information
Specifications ................................................................................................................................. 35
Troubleshooting ................................................................................................................ ............. 37
 
: for digital channels only
Before operating the TV, please read “Safety Information” (page 9). Retain this manual for future reference.
 
						

							
4 GB
Start-up Guide
1: Checking the accessories
Mains lead (Type BF) (1)
Stand (1) and screws (4) (except for KDL-52V4000/
52V42xx) 
Remote RM-ED013 (1)
Size AA batteries (R6 type) (2)
To insert batteries into the remote
2: Attaching the stand 
(except for KDL-52V4000/
52V42xx) 
~
 If using an electric screwdriver, set the tightening torque at approximately 1.5 N·m (15 kgf·cm).
Push and lift the cover to open.
 
						

							
5 GB
Start-up Guide
3: Connecting an aerial/Set 
Top Box/recorder (e.g. DVD 
recorder)
Connecting a Set Top Box/recorder (e.g. 
DVD recorder) with SCARTConnecting a Set Top Box/recorder (e.g. 
DVD recorder) with HDMI
Set Top Box/recorder (e.g. DVD recorder)
Set Top Box/recorder (e.g. DVD recorder)
 
						

							
6 GB
4: Preventing the TV from 
toppling over
1Install a wood screw (4 mm in diameter, 
not supplied) in the TV stand.
2Install a machine screw (M6 × 12, not 
supplied) into the screw hole of the TV.
3Tie the wood screw and the machine 
screw with a strong cord.
5: Bundling the cables
6: Performing the initial 
set-up
3
 
						

							
7 GB
Start-up Guide
4
5
Select “Home” for the best TV settings to 
use the TV in the home.
6
Make sure that the aerial is connected.
7
When you select “Cable”, we recommend 
that you select “Quick Scan” for quick 
tuning. Set “Frequency” and “Network 
ID” according to the information supplied 
from your cable provider. If no channel is 
found using “Quick Scan”, try “Full 
Scan”(though it may take some time).
For a list of compatible cable providers, 
refer to the support web site:
http://support.sony-europe.com/TV/
DVBC/
~
 Do not press any buttons on the TV or remote 
while searching for available channels.
8
If you want to change the order of 
analogue channels, follow the steps in 
“Programme Sorting” on page 31.
If your TV cannot receive digital 
broadcasts, the “Clock Set” menu appears 
on the screen (page 28).
9
10
11
Ye s
No
Do you w ant to en able control for comp atible 
HDMI device s?
Control for HDMI
 
						

							
8 GB
Adjusting the viewing angle 
of the TV (except for KDL-
40U40xx/40L4000)
This TV can be adjusted within the angles 
shown below.
Adjust the angle left and right (swivel)
Detaching the Table-Top 
Stand from the TV
~
 Remove the screws guided by the arrow marks   of the TV.
 Do not remove the Table-Top Stand for any reason 
other than to wall-mount the TV.
KDL-52V4000/52V42xx/46V4000/46V42xx/
40V4000/40V42xx/40L4000
KDL-40S40xx/40U40xx
Top view
Front
 
						

							
9 GB
Safety 
Information
Installation/Set-upInstall and use the TV set in accordance with the instructions below 
in order to avoid any risk of fire, electrical shock or damage and/or 
injuries.
Installations The TV set should be installed near an easily accessible mains 
socket.
s Place the TV set on a stable, level surface.
s Only qualified service personnel should carry out wall 
installations.
s For safety reasons, it is strongly recommended that you use 
Sony accessories, including:
KDL-52V4000/52V42xx:
– Wall-mount bracket SU-WL500
KDL-46V4000/46V42xx/40V4000/40V42xx/40S40xx/
40U40xx/40L4000:
– Wall-mount bracket SU-WL500
– TV stand SU-FL300M
s Be sure to use the screws supplied with the Wall-mount bracket 
when attaching the mounting hooks to the TV set. The supplied 
screws are designed so that they are 8 mm to 12 mm in length 
when measured from the attaching surface of the mounting 
hook. 
The diameter and length of the screws differ depending on the 
Wall-mount bracket model. 
Use of screws other than those supplied may result in internal 
damage to the TV set or cause it to fall, etc.
TransportingsBefore transporting the TV set, 
disconnect all cables.
s Two or three people are needed 
to transport a large TV set.
s When transporting the TV set 
by hand, hold it as shown on 
the right. Do not put stress on 
the LCD panel.
s When lifting or moving the TV 
set, hold it firmly from the 
bottom.
s When transporting the TV set, 
do not subject it to jolts or 
excessive vibration.
s When transporting the TV set 
for repairs or when moving, 
pack it using the original 
carton and packing material.
VentilationsNever cover the ventilation holes or insert anything in the 
cabinet.
s Leave space around the TV set as shown below.
s It is strongly recommended that you use a Sony wall-mount 
bracket in order to provide  adequate air-circulation.
Installed on the wall
Installed with stand
sTo ensure proper ventilation and prevent the collection of dirt 
or dust:
– Do not lay the TV set flat, install upside down, backwards, 
or sideways.
– Do not place the TV set on a shelf, rug, bed or in a closet.
– Do not cover the TV set with a cloth, such as curtains, or  items such as newspapers, etc.
– Do not install the TV set as shown below.
Mains leadHandle the mains lead and socket as follows in order to avoid any 
risk of fire, electrical shock or damage and/or injuries:
– Use only mains leads supplied by Sony, not other suppliers.
– Insert the plug fully into the mains socket.
– Operate the TV set on a 220–240 V AC supply only.
– When wiring cables, be sure to unplug the mains lead for your  safety and take care not to catch your feet on the cables.
– Disconnect the mains lead from the mains socket before  working on or moving the TV set.
– Keep the mains lead away from heat sources.
– Unplug the mains plug and clean it regularly. If the plug is  covered with dust and it picks  up moisture, its insulation may 
deteriorate, which could result in a fire. 
Notess Do not use the supplied mains lead on any other equipment.
s Do not pinch, bend, or twist the mains lead excessively. The 
core conductors may be exposed or broken.
Mounting Hook
Hook attachment on rear of TV set Screw (supplied with the Wall-mount 
bracket)
8 mm - 12 mm
B e  s u r e  t o  h o l d  t h e  
bottom of 
the panel, not the front part.
Do not handle with dent 
area.
Do not handle with the 
transparent  bottom part.
30 cm
10 cm 10 cm
10 cm
Leave at least this space around the set.
30 cm
10 cm 10 cm 6 cm
Leave at least this space around the set.
Air circulation is  blocked.
Wall Wall
(Continued)
 
						

							
10 GB
sDo not modify the mains lead.
s Do not put anything heavy on the mains lead.
s Do not pull on the mains lead itself when disconnecting the 
mains lead.
s Do not connect too many appliances to the same mains socket.
s Do not use a poor fitting mains socket.
Prohibited UsageDo not install/use the TV set in locations, environments or 
situations such as those listed below, or the TV set may malfunction 
and cause a fire, electrical shock, damage and/or injuries.
Location:Outdoors (in direct sunlight), at the seashore, on a ship or other 
vessel, inside a vehicle, in medical institutions, unstable locations, 
near water, rain, moisture or smoke.
Environment:Places that are hot, humid, or excessively dusty; where insects may 
enter; where it might be exposed to mechanical vibration, near 
flammable objects (candles, etc). The TV set shall not be exposed 
to dripping or splashing and no objects filled with liquids, such as 
vases, shall be placed on the TV.
Situation:Do not use when your hands are wet, with the cabinet removed, or 
with attachments not recommended by the manufacturer. 
Disconnect the TV set from mains socket and aerial during 
lightning storms.
Broken pieces:sDo not throw anything at the TV set. The screen glass may 
break by the impact and cause serious injury.
s If the surface of the TV set cracks, do not touch it until you have 
unplugged the mains lead. Otherwise electric shock may result.
When not in usesIf you will not be using the TV set for several days, the TV set 
should be disconnected from th e mains for environmental and 
safety reasons. 
s As the TV set is not disconnected from the mains when the TV 
set is just turned off, pull the plug from the mains to disconnect 
the TV set completely.
s However, some TV sets may have features that require the TV 
set to be left in standby to work correctly.
For childrensDo not allow children to climb on the TV set.
s Keep small accessories out of the r each of children, so that they 
are not mistakenly swallowed. 
If the following problems occur...Turn off  the TV set and unplug the mains lead immediately if any 
of the following problems occur.
Ask your dealer or Sony service centre to have it checked by 
qualified service personnel.
When:– Mains lead is damaged.
– Poor fitting of mains socket.
– TV set is damaged by being dr opped, hit or having something 
thrown at it.
– Any liquid or solid object falls through openings in the cabinet.
Precautions
Viewing the TVs View the TV in moderate light, as viewing the TV in poor light 
or during long period of time, strains your eyes.
s When using headphones, adjust the volume so as to avoid 
excessive levels, as hearing damage may result.
LCD ScreensAlthough the LCD screen is made with high-precision 
technology and 99.99% or more of the pixels are effective, 
black dots may appear or bright points of light (red, blue, or 
green) may appear constantly on the LCD screen. This is a 
structural property of the LCD screen and is not a malfunction.
s Do not push or scratch the front filter, or place objects on top of 
this TV set. The image may be uneven or the LCD screen may 
be damaged.
s If this TV set is used in a cold place, a smear may occur in the 
picture or the picture may beco me dark. This does not indicate 
a failure. These phenomena disappear as the temperature rises.
s Ghosting may occur when still pictures are displayed 
continuously. It may disappear after a few moments.
s The screen and cabinet get warm when this TV set is in use. 
This is not a malfunction.
s The LCD screen contains a small amount of liquid crystal. 
Some fluorescent tubes used in this TV set also contain 
mercury. Follow your local ordinances and regulations for 
disposal.
Handling and cleaning the screen surface/
cabinet of the TV set
Be sure to unplug the mains lead connected to the TV set from 
mains socket before cleaning.
To avoid material degradation or screen coating degradation, 
observe the following precautions.
sTo remove dust from the screen surface/cabinet, wipe gently 
with a soft cloth. If dust is persistent, wipe with a soft cloth 
slightly moistened with a diluted mild detergent solution.
s Never use any type of abrasive pad, alkaline/acid cleaner, 
scouring powder, or volatile solvent, such as alcohol, benzene, 
thinner or insecticide. Using such materials or maintaining 
prolonged contact with rubber or  vinyl materials may result in 
damage to the screen surface and cabinet material.
s When adjusting the angle of the TV set, move it slowly so as to 
prevent the TV set from moving or slipping off from its table 
stand.
Optional EquipmentKeep optional components or any equipment emitting 
electromagnetic radiation away from the TV set. Otherwise picture 
distortion and/or noisy sound may occur.
BatteriessObserve the correct polarity when inserting batteries.
s Do not use different types of batteries together or mix old and 
new batteries.
s Dispose of batteries in an environmentally friendly way. 
Certain regions may regulate the disposal of batteries. Please 
consult your local authority.
s Handle the remote with care. Do not drop or step on it, or spill 
liquid of any kind onto it.
s Do not place the remote in a location near a heat source, a place 
subject to direct sunlight, or a damp room.