Sony Kdl 46v4000 Operating Instructions

11 GB
Remote Control and TV Controls/Indicators
Remote control and TV controls
ButtonDescription
1"/1 
— TV 
standby Press to turn the TV on or to switch to standby 
mode.
~
 To disconnect the TV completely, turn off the 
TV, then unplug the AC power cord from the 
AC power.
2  — Picture 
freeze Press to freeze the TV picture. The frozen picture 
is displayed in full size, and a moving picture is 
displayed in the small screen.
To remove the small screen, press once. To return 
to single picture...

12 GB
6OPTIONS Press to display a list that contains “Twin Picture” 
(page 22), “PIP” (page 22), “Device Control”, or 
shortcuts to some setting menus (page 26). Use 
the “Device Control” menu to operate equipment 
that is compatible with control for HDMI.
The listed options vary depending on the input 
source.
7 HOME Press to display the TV Home menu (page 25).
8 Number 
buttons In TV mode: Press to select channels. For 
channel numbers 10 and above, press the next 
digit quickly.
In Text mode: Press...

13 GB
qjGUIDE / 
— EPG Press to display the Digital Electronic 
Programme Guide (EPG).
For Australian model, see page 17. 
For New Zealand model, EPG is available as an 
interactive service if provided by a broadcaster.
qk DIGITAL/
ANALOG Switches between digital and analogue modes.
ql  
— Twin 
Picture/PIP Displays two pictures simultaneously (page 22).
w; / 
— Info/Text 
reveal In digital mode: Displays details of the 
programme currently being viewed.
In analogue mode: 
Displays information. Press...

14 GB
~
 Make sure that the TV is completely turned off before unplugging the AC power cord. Unplugging the AC power cord while the TV is turned on may cause the indicator to remain lit or may cause the TV to 
malfunction.
The operation guide provides help on how to operate the TV using the remote, and is displayed at 
the bottom of the screen. Use the remote buttons shown on the operation guide.
Indicators
IndicatorDescription
1 Light sensor Do not put anything over the sensor, as its function may be...

15 GB
Watching TV
Watching TV
Watching TV
1Press 1 on the TV to turn on the TV.
When the TV is in standby mode (the  1 
(standby) indicator on the TV front panel 
is red), press  "/1 on the remote to turn on 
the TV.
2Press  DIGITAL/ANALOG  to switch 
between digital and analogue modes.
The available channels vary depending on 
the mode.
3Press the number buttons or  PROG +/– to 
select a TV channel.
To select channel numbers 10 and above 
using the number buttons, enter the next 
digit quickly.
To...

16 GB
To change the Wide Mode manually
Press   repeatedly to select the desired Wide 
Mode.
* Parts of the top and bottom of the picture may be cut off. You can adjust the vertical position of the picture. Press 
F/f  to move the picture up or down (e.g. to read 
subtitles).
~
 When you select “Wide Zoom”, some characters  and/or letters at the top and the bottom of the 
picture may not be visible. In such a case, adjust 
“Vertical Size” in the “Screen Settings” menu 
(page 29).
z
 When “Auto Wide”...

17 GB
Watching TV
Using the Digital Electronic Programme Guide (EPG) * 
(Australian model only)
1In digital mode, press  GUIDE.
2Perform the desired operation as shown in 
the following table or displayed on the 
screen.
* This function may not be available in some regions.
Digital Electronic Programme Guide (EPG)
ToDo this
View a programme Press  F/f /G /g  to select a programme, then press  .
Turn off the EPG Press  GUIDE.
Sort programme information by 
category
– Category list
1Press the blue...

18 GB
Using the Digital Favourite List * 
You can specify up to four of your favourite 
channel lists.
1In digital mode, press  .
2Perform the desired operation as shown in 
the following table or displayed on the 
screen.
* This function may not be available in some regions.
(New Zealand model)
Digital Favourite List
(Australian model)
ToDo this
Create a Favourite list for the first 
time1Press the yellow button to select the Favourite list.
2Press  F/f /G /g  to select the channel you want to add,...

19 GB
Using Optional Equipment
Using Optional Equipment
Connecting Optional Equipment
You can connect a wide range of optional equipment to your TV.
For service use only
Digital still cameraCamcorder
USB storage media
Camcorder
Headphones CamcorderDVD player
Blu-ray disc player Audio system
PC (HDMI-output)
PC
Hi-Fi audio 
equipment
Home theatre system 
with digital input
Video game 
equipment
DVD player DVD recorder
DVD player with 
component output
VCR
VCR DIGITAL MEDIA 
PORT adaptor
(Continued)
 

20 GB
Connect toInput symbol on 
screenDescription
1 USB You can view photographs on the Sony digital still camera, 
camcorder or USB storage media connected to the TV.
2  HDMI IN 2
HDMI IN 1 or 3 HDMI 2
HDMI 1 or
HDMI 3The digital video and audio signals are input from the 
equipment. 
In addition, when you connect the equipment that is 
compatible with control for HDMI, communication with the 
connected equipment is supported. Refer to page 31 to set up 
this communication. 
If the equipment has a DVI...