Home
>
Sony
>
Television
>
Sony KDL-46R453A, 46R450A, 40R471A, 40R450A, 32R21A, 32R00A LCD TV Operating Instructions
Sony KDL-46R453A, 46R450A, 40R471A, 40R450A, 32R21A, 32R00A LCD TV Operating Instructions
Here you can view all the pages of manual Sony KDL-46R453A, 46R450A, 40R471A, 40R450A, 32R21A, 32R00A LCD TV Operating Instructions. The Sony manuals for Television are available online for free. You can easily download all the documents as PDF.
Page 11
11 Getting Started 4CABLE/ ANTENNARF input that connects to your Cable or VHF/UHF antenna. 5VIDEO IN/ COMPONENT IN/R-AUDIO-L (MONO)This input port can be used as a composite video input (VIDEO) or as a component video input (COMPONENT). For composite use, connect the yellow jack to Y for video and use audio L (mono) and R for audio signal. For component connection, use Y, P B, PR for video signals and also connect the audio L (mono) and R for audio signal. This TV can auto detect and switch...
Page 12
12 Connecting the TV Cable System or VHF/UHF Antenna System You can enjoy high-definition and standard-definition digital programming (if available in your area) along with standard-definition analog programming. This TV is capable of receiving unscrambled digital programming for both cable (QAM and 8VSB) and external VHF/UHF antenna (ATSC). xCable or VHF/UHF (or VHF only) It is strongly recommended that you connect the CABLE/ANTENNA input using a 75-ohm coaxial cable to receive optimum picture...
Page 13
13 Getting Started HD Cable Box/HD Satellite Box You can enjoy high-definition programming by subscribing to a high-definition cable service or a high-definition satellite service. For the best possible picture, make sure you connect this equipment to your TV via the HDMI or component video (with audio) input located on the back of your TV. xShown with HDMI Connection xShown with Component Connection Rear of TV HDMI cableHD cable box/ HD satellite boxCATV/Satellite antenna cable Rear of...
Page 14
14 MHL device The MHL (Mobile High-Definition Link) enables the TV to communicate with connected MHL-compatible device. When connecting MHL-compatible device, TV simultaneously charges the connected device while playing photo/music/video from it. You can use the TV remote control to control the connected MHL-compatible device. You can continue normal usage of the connected MHL-compatible device (such as receiving calls) depending on its capability. Some remote control functions may not be available...
Page 15
15 Getting Started Connecting Other Equipment Refer to the Quick Setup Guide (supplied) when connecting other equipment to your TV. Blu-ray Disc Player/ “PS3”DVD playerDigital satellite receiver Analog audio equipment (A/V Receiver/HomeTheater)Digital cable boxAudio system Digital audio equipment (A/V Receiver/Home Theater) Digital recorderUSB CABLE/ANTENNAMHL device
Page 16
16 When Installing the TV Against a Wall or Enclosed Area Make sure that your TV has adequate ventilation. Allow enough space around the TV as shown below. Avoid operating the TV at temperatures below 41 °F (5 °C). Inadequate ventilation can lead to overheating of the TV and may cause damage to your TV or cause a fire. (30 cm) 117/8 inches (6 cm) inches 4 inches (10 cm)4 inches (10 cm)23/8 Leave at least this much space around the set. Installed with stand inches 117/8 4 inches (10 cm) 4...
Page 17
17 Getting Started Securing the TV Sony strongly recommends taking measures to prevent the TV from toppling over. Unsecured TVs may topple and result in property damage, serious bodily injury or even death. Preventing the TV from Toppling ❑Secure the TV to a wall and/or stand. ❑Do not allow children to play or climb on furniture and TV sets. ❑Avoid placing or hanging items on the TV. ❑Never install the TV on: slippery, unstable and/or uneven surfaces. furniture that can easily be used as steps, such...
Page 18
18 2Secure the TV to the stand. Use the optional hardware listed below (not supplied): M4 machine screw (screwed into the screw hole of the TV). A screw or similar (attach it to the TV stand). Rope or chain (strong enough to support the weight of the TV). Make sure that there is no excess slack in the rope or chain. An alternative way to secure the TV is with an optional Sony Support Belt Kit. The Sony Support Belt Kit is available as an optional accessory, depending on your TV model. The length of...
Page 19
19 Getting Started Contact Sony Customer Support to obtain the optional Support Belt Kit by providing your TV model name. For United States call: 1-800-488-7669 or visit: http://www.sony.com/accessories For Canada call: 1-877-899-7669 Securing the TV to the stand without securing the TV and the stand to the wall provides minimum protection against the TV toppling over. For further protection, be sure to follow the three measures recommended.
Page 20
20 Running Initial Setup During initial setup, you will perform the following: Set the language for the On Screen Display (OSD) text Choose your viewing environment Scan for digital and analog channels Set the current date and time after Auto Program. Complete your cable connections before beginning the Initial Setup. Refer to the Quick Setup Guide (supplied) for sample connection diagrams. 2Use the remote control buttons described below to navigate through the Initial Setup. 3Auto Program will...