Sony Kdl 40s2030 Operating Instructions

KDL-46S2000
KDL-40S2000
KDL-32S2000
KDL-32S2030
KDL-26S2020KDL-46S2010
KDL-40S2010
KDL-32S2010
KDL-26S2000
KDL-26S2030
© 2006 Sony Corporation
LCD Digital Colour TV
2-670-908-14(1)
KDL-46/40/32/26S2000
2-670-908-14(1)
U
KDL-46S2030
KDL-40S2030
KDL-32S2020
KDL-26S2010
Operating Instructions 
Before operating the TV, please read the “Safety 
information” section of this manual.
Retain this manual for future reference.
For useful information about Sony products
010COV.fm  Page 1  Tuesday, January 2, 2007...

2 GBNOTICE FOR 
CUSTOMERS IN THE 
UNITED KINGDOMA moulded plug complying with BS1363 is fitted to this 
equipment for your safety and convenience.
Should the fuse in the plug supplied need to be replaced, a 13 
AMP fuse approved by ASTA or BSI to BS 1362 (i.e., 
marked with   or  ) must be used.
When an alternative type of plug is used it should be fitted 
with a 13 AMP FUSE, otherwise the circuit should be 
protected by a 13 AMP FUSE at the distribution board.
If the plug supplied with this equipment...

3 GB
Table of ContentsSafety information ..................................................................................................................... 7
Precautions ............................................................................................................................. 10
Overview of the remote ........................................................................................................ 11
Overview of the TV buttons and indicators...

4 GBStart-up Guide1: Checking the 
accessoriesRemote RM-ED005 (1)
Size AA batteries (R6 type) (2)
Mains lead (Type BF) (1)
Coaxial cable (1)
Cable holder (1)
Support belt (1) and screws (2)To insert batteries into the remoteNotes Observe the correct polarity when inserting batteries.
 Dispose of batteries in an environmentally friendly way. 
Certain regions may regulate disposal of the battery. 
Please consult your local authority.
 Do not use different types of batteries together or mix old 
and new...

5 GB
Start-up Guide
3: Bundling the cables4: Preventing the TV 
from toppling over
5: Selecting the 
language and country/
region1
Connect the TV to your mains socket (220-
240V AC, 50Hz).
2
Press 1 on the TV (top side).When you switch on the TV for the first time, the 
Language menu appears on the screen.
When the TV is in standby mode (the 
1 (standby) 
indicator on the TV (front) is red), press "/1 on 
the remote to switch on the TV.
2
3
1
1 2
3,4
3,4 2
Continued
 

6 GB3
Press 
F/f to select the language 
displayed on the menu screens, then press 
.
4
Press 
F/f to select the country/region in 
which you will operate the TV, then press 
.
If the country/region in which you want to use the 
TV does not appear in the list, select “-” instead of 
a country/region.
The message confirming the TV start auto-tuning 
appears on the screen, then go to “6: Auto-tuning 
the TV”.
6: Auto-tuning the TVThe TV will now search for and store all available TV 
channels.
1
Before you...

7 GB
Safety informationMains lead Observe the followings 
to prevent the mains 
lead being damaged.
If the mains lead is 
damaged, it may result 
in a fire or an electric 
shock.
– Unplug the mains lead when moving the TV set.
– When you disconnect the 
mains lead, disconnect it 
from the mains socket first.
– Be sure to grasp the plug 
when disconnecting the 
mains lead. Do not pull on 
the mains lead itself.
– Do not pinch, bend, or twist 
the mains lead excessively. 
The core conductors may be...

8 GBVentilation Never cover the ventilation 
holes or insert anything in the 
cabinet. It may cause 
overheating and result in a fire.
 Unless proper ventilation is 
provided, the TV set may gather dust and get dirty. For 
proper ventilation, observe the following:
– Do not install the TV set turned backwards or sideways. 
– Do not install the TV set turned over or upside down. 
– Do not install the TV set on a shelf or in a closet. 
– Do not place the TV set on a rug or bed. 
– Do not cover the TV set...

9 GB
 Do not touch the mains lead and the 
TV set with wet hands. Doing so 
may cause an electric shock or 
damage to the TV set.Moisture and flammable objects Do not place any objects on the TV 
set. The TV set shall not be exposed to 
dripping or splashing and that no 
objects filled with liquid, such as 
vases, shall be placed on the TV set.
 To prevent fire, keep flammable 
objects or naked lights (e.g. candles) 
away from the TV set.
 If any liquid or solid object does fall through openings in 
the...

10
 GBPrecautionsViewing the TV To view the TV comfortably, the recommended viewing 
position is from four to seven times the screen’s vertical 
length away from the TV set.
 To obtain a clear picture, do not expose the screen to direct 
illumination or direct sunlight. If possible, use spot 
lighting directed down from the ceiling.
 View the TV in moderate light, as viewing the TV in poor 
light or during long period of time, strains your eyes. Volume adjustment Adjust the volume so as not to trouble...