Sony Kdl 40nx800 Operating Instructions

							11
Setting up your TV
Shown with PC Connection with SD VCR/DVD
Rear of TV Notebook PC
PC
DVD VCR Splitter
Cable/AntennaVCR/DVD Comboor
 
						

							12
Securing the TV
Sony strongly recommends 
taking measures to prevent the 
TV from toppling over.
Unsecured TVs may topple and 
result in property damage, 
serious bodily injury or even 
death.
Preventing the TV from 
Toppling
 Secure the TV to a wall and/or stand.
 Do not allow children to play or climb on 
furniture and TV sets.
 Avoid placing or hanging items on the TV.
 Never install the TV on:
–slippery, unstable and/or uneven surfaces.
–furniture that can easily be used as steps, 
such as a chest of drawers.
 Install the TV where it cannot be pulled, 
pushed, or knocked over.
 Route all AC power cords and connecting 
cables so that they are not accessible to 
curious children.
Recommended Measures to 
Secure the TV
Consider the following measures when 
securing your TV to a Stand (not supplied).
1Secure the Stand for the TV
Make sure the Stand can adequately support 
the weight of the TV. Use two angle braces 
(not supplied) to secure the stand. For each 
angle brace use the appropriate hardware to:
 Attach one side of the angle brace to the 
wall stud. 
 Attach the other side to the Stand. 
2Secure the TV to the Stand
Use the optional hardware listed below (not 
supplied):
 M4 × 16 machine screw (screwed into the 
TV’s Table-Top Stand)
 A screw or similar (attach it to the Stand) 
 Rope or chain (strong enough to support the 
weight of the TV). Make sure that there is 
no excess slack in the rope or chain. 
An alternative way to secure the TV is with an 
optional Sony Support Belt Kit.
~
Contact Sony Customer Support to obtain the 
optional Support Belt Kit by providing your TV 
model name.
 For United States call: 1-800-488-7669 or visit: 
www.sony.com/accessories
 For Canada call: 1-877-899-7669
Stand Angle brace 
(not supplied)
M4 × 16 
machine 
screw (not 
supplied)
Rope or 
chain (not 
supplied) Screw hole on 
the Table-Top 
StandScrew 
(not supplied)
 
						

							13
Setting up your TV
3Anchor the TV to the Wall
Anchor the TV to the wall by using bolts, wall 
anchor and chain (or rope).
~
 KDL-55HX800 is shipped with screws attached 
to the rear of the TV. (They are fastened in the 
screw holes for wall mounting.) Be sure to 
remove the upper two screws prior to installing 
the TV on a wall.
 Securing the TV to the stand without securing 
the TV and the stand to the wall provides 
minimum protection against the TV toppling 
over. For further protection, be sure to follow the 
three measures recommended.
Organizing the AC power 
cord
Anchor bolts (not supplied)
Wall-
mount 
holesRope 
or 
chain 
(not 
supplied)
Wall-anchor 
(not supplied)
 
						

							14
Running initial setup
1Complete your cable connections 
before proceeding with the Initial 
Setup.
Connect the TV to your nearest power 
outlet.
2Check the ENERGY SAVING 
SWITCH setting is on (z).
3Press POWER on the TV.
When you switch the TV on for the first 
time, the Language menu appears on 
the screen.
4Follow the instructions on the screen.
~
The ENERGY SAVING SWITCH must be 
on (z) to set the clock and obtain program 
information for the TV Guide.
Home mode sets the TV to settings optimized for 
home viewing (this setting is ENERGY STAR 
compliant).
5Select Continue to scan for available 
channels and enable the 
TV Guide On 
Screen® feature. If you receive channels 
from a cable box or satellite receiver 
and do not wish to use the TV’s built-in 
tuner, select 
Skip. 
Selecting 
Skip will disable the TV Guide 
On Screen
 feature, which is only 
available when the TV’s tuner is used.
~
If you skip the channel scan while in the setup 
menus, TV Guide will be disabled.
Detaching the Table-Top 
Stand from the TV
Remove only the screws marked with   on 
the TV.
~
Do not remove the Table-Top Stand for any 
reason other than to install corresponding 
accessories on the TV.
For XBR-52/46HX909 and KDL-40HX800, 
remove the stand rear cover prior to detaching the 
Table-Top Stand.
For KDL-55HX800, when installing the TV on a 
wall, remove the four screws from the rear of the 
TV. (They are fastened in the screw holes for wall 
mounting.) Be sure to store the removed screws in 
a safe place, keeping them away from children.
For KDL-55HX800, when attaching the Table-
Top Stand again, be sure to fasten the four screws 
(previously removed) to the original holes on the 
rear of the TV.
Do not hold by the stand rear cover while carrying 
the Table-Top Stand to prevent dropping the stand 
which may cause an injury or damage to the 
property.
POWER
 
						

							15
Setting up your TV
Using a Wall-Mount Bracket
Your TV can be mounted on a wall using a 
Wall-Mount Bracket (not supplied) out of the 
box as packaged. If the Table-Top Stand is 
attached to the TV, the TV may require 
detaching the Table-Top Stand; see “Detaching 
the Table-Top Stand from the TV” (page 14). 
Prepare the TV for the Wall-Mount Bracket 
before making cable connections.
For product protection and safety reasons, 
Sony strongly recommends that you use the 
Wall-Mount Bracket designed for your TV 
and the installation should be performed by 
a Sony dealer or licensed contractor.
 Follow the instruction guide provided with 
the Wall-Mount Bracket for your model. 
Sufficient expertise is required in installing 
this TV, especially to determine the 
strength of the wall for withstanding the 
TV’s weight.
 Be sure to use the screws supplied with the 
Wall-mount bracket when attaching the 
mounting hooks to the TV set.
The supplied screws are designed so that 
they are 8 mm to 12 mm in length when 
measured from the attaching surface of the 
mounting hook.
The diameter and length of the screws differ 
depending on the Wall-mount bracket 
model. Use of screws other than those 
supplied may result in internal damage to 
the TV set or cause it to fall, etc.
 Be sure to store the unused screws and 
Table-Top Stand in a safe place until you 
are ready to attach the Table-Top Stand. 
Keep the screws away from small children.
~
Read the supplied Safety Booklet for additional 
safety information.
Installing the TV Against a 
Wall or Enclosed Area
Make sure that your TV has adequate 
ventilation. Allow enough space around the 
TV as shown below. Avoid operating the TV at 
temperatures below 41 °F (5 °C).
~
Inadequate ventilation can lead to overheating of 
the TV and may cause damage to your TV or 
cause a fire.
8-12 mm
Screw 
(supplied with the 
Wall-mount bracket)
Mounting Hook
Hook attachment on rear of TV 
set
(30 cm) 117/8 inches
(6 cm)            inches
4 inches
(10 cm)4 inches
(10 cm)23/8 
Leave at least this much space around the set.
Installed with stand
inches 117/8 
4 inches
(10 cm) 4 inches
(10 cm)
4 inches (10 cm)
(30 cm)
Installed on the wall
Leave at 
least this 
much space 
around the 
set.
Never install the TV set as follows:
Air circulation is blocked.Air circulation is blocked.
Wall Wall
 
						

							16
To watch TV
To watch programs
To use the TV features
Press HOME to display TV Home Menu/
XMB
™ to access TV Settings and other 
media and network related content.
Press OPTIONS to display a list of convenient 
functions and menu shortcuts. The Options menu 
items vary based on current input and/or content.
1Turn on the TV.
1Check the ENERGY SAVING 
SWITCH setting is on (z).
2Press POWER on the TV or on the 
remote control to turn on the TV. (You 
may use the 1 button located on the 
front or back of the remote control.)
2Select a TV channel.
To use the Guide
Press GUIDE to display the TV Guide On 
Screen to view scheduled programs or to 
select a program to watch. Press again to exit 
the Guide. Use with 0-9 and ENT to select 
digital channels. For example, to enter 2.1, 
press , ,  and ENT.
GUIDE
OPTIONS
HOME
0-9
ENT
2 1-2
SettingsPicture & DisplayAdjust the picture and screen settingsPress      for:
Picture Adjustments
Ambient Sensor
Screen
Pro Picture Setup
Picture Adjustments
Sound Adjustments
Add to Favorites
Motionflow
Scene Select
Speakers
MTS Audio
 
						

							17
To watch TV
To use i-Manual
xWelcome to i-Manual
x“BRAVIA” TV Features
xWatching TV
Introduces convenient features such as TV 
Guide, Favorites, etc.
xUsing the Home Menu
You can find how to customize your TV 
settings, etc.xFun Features with Connected 
Equipment
Introduces how to connect and enjoy optional 
equipment.
xParts Description
xTroubleshooting
You can find solutions for your problems.
xIndex
~
Images and illustrations may differ from what you are watching on this TV.
Your BRAVIA TV comes with an on-screen 
manual. To learn more about your TVs features 
you can access your i-Manual with the touch of a 
button.
1Press i-MANUAL.
2Press F/f/G/g/  to navigate and 
select items.
1
2
Welcome to i-Manual
BRAVIA TV  Features
Watching TV
Using the Home Menu
Fun Features with Connected Equipment
Parts Description
Troubleshooting
Index
i-Manual
RETURNBack
 
						

							18
Additional Information
Troubleshooting
The TV will indicate any problems with the STANDBY indicator flashing in red.
When the STANDBY indicator is flashing
The self-diagnosis function is activated. 
1Count how many times the STANDBY indicator flashes between each three second 
break.
For example, the indicator may flash three times, go off for three seconds, then flash 
again three times.
2Press POWER on the TV to turn it off, disconnect the AC power cord, and contact 
Sony Customer Support (information provided on the front cover) with how many times 
the indicator flashes.
When the STANDBY indicator is not flashing
1Check the items in the tables below. (Also refer to “Troubleshooting” in the i-Manual.)
2If the problem persists, contact Sony Customer Support (information provided on the 
front cover).
ConditionExplanation/Solution
Picture
There is no picture (screen 
is dark) and no sound.Check the antenna/cable connection.
Connect the TV to the AC power, and press POWER on the TV.
If the STANDBY indicator lights up in red, press POWER on the 
remote control.
Tiny black dots and/or 
bright dots appear on the 
screen.The screen is composed of pixels. Tiny black dots and/or bright 
dots (pixels) on the screen do not indicate a malfunction.
General
The TV’s power cannot be 
turned on.Check to see the (z) mark on the ENERGY SAVING SWITCH 
is pressed.
The TV turns off 
automatically (the TV 
enters standby mode).Check if the Sleep Timer, Timer, or Idle TV Standby is 
activated.
The Auto Shut-off function may be set to On. If Auto 
Shut-off is activated and TV receives no signal, the TV will 
automatically enter standby mode in 15 minutes. Check Auto 
Shut-off is activated under Eco feature of this TV.
The remote does not 
function.Replace the batteries.
Your TV may be in SYNC mode. Press SYNC MENU, select TV 
Control and then select Home (Menu) or Options to control 
the TV.
The TV and its surrounding 
become warm.When the TV is used for an extended period of time, the TV and 
its surround may become warm to touch. This is not malfunction 
of the TV.
The Parental Lock 
password has been 
forgotten.Enter 4357 for the PIN code. (PIN code 4357 is always accepted.)
 
						

							19
Additional Information
How to Care for Your BRAVIA
Safety is very important, please read and follow the safety documentation (Safety Booklet) 
separately provided.
Unplug the TV and other connected equipment from the wall 
outlet before you begin cleaning your TV.
 Wipe the LCD screen gently with a soft cloth.
 Stubborn stains may be removed with a cloth slightly moistened with a 
solution of mild soap and warm water.
 If using a chemically pretreated cloth, please follow the instruction 
provided on the package.
 Never use strong solvents such as a thinner, alcohol or benzine for cleaning.
 Do not plug in the TV into the wall outlet until the moisture from cleaning has evaporated.
The TV should also be placed on a stable surface to prevent it from toppling over (see page 12). 
If you have young children or pets at home, check regularly to insure the TV is securely fastened. 
 
						

							20
Specifications
*1 For LAN connections, use a Category 7 10BASE-T/100BASE-TX cable (not supplied).
*2 Download Acquisition Mode (DAM) is used for software updates and/or collecting data for TV Guide On Screen.
 Optional accessories availability depends on its stock.
 Design and specifications are subject to change without notice.
System
Television system NTSC: American TV standard 
ATSC (8VSB terrestrial): ATSC compliant 8VSB
QAM on cable: ANSI/SCTE 07 2000 (Does not include CableCARD functionality)
Channel coverage Analog terrestrial: 2 - 69 / Digital terrestrial: 2 - 69
Analog Cable: 1 - 135 / Digital Cable: 1 - 135
Panel system LCD (Liquid Crystal Display) Panel
Speaker output 10 W + 10 W
Input/Output jacks
CABLE/ANTENNA 75-ohm external terminal for RF inputs
VIDEO IN 1/2 VIDEO / AUDIO
COMPONENT IN 1/2 YP
BPR (Component Video) / Signal format: 480i, 480p, 720p, 1080i, 1080p / AUDIO
HDMI IN 1/2/3/4 HDMI: Video: 480i, 480p, 720p, 720/24p, 1080i, 1080p, 1080/24p
HDMI: Audio: Two channel linear PCM 32, 44.1 and 48 kHz, 16, 20 and 24 bits, Dolby Digital
AUDIO (HDMI IN 4)
AUDIO OUT 500 mVrms (typical)
DIGITAL AUDIO OUT 
(OPTICAL)PCM/Dolby Digital optical signal
PC IN D-sub 15-pin, analog RGB
PC/HDMI 4 AUDIO INPUT Stereo mini jack
LAN
10BASE-T/100BASE-TX connector (Connection speed may differ depending on the network environment. 
10BASE-T/100BASE-TX communication rate and communication quality are not guaranteed for this TV.)*1
USB/DLNA Refer to the i-Manual for supported format.
3D SYNC 3D Sync terminal for optional transmitter
REMOTE (HX909 series only) RS232C, D-sub 9 pin.
This jack is for receiving the external control signal.
Model name KDL-/XBR-55HX80052HX90946HX90946HX80040HX800
Power and others
Power requirement 110 V - 240 V AC, 50/60 Hz (U.S.A./Canada 120 V AC, 60 Hz)
Power consumption
167 W 201 W 184 W 149 W 132 W
in use
in DAM*
214 W
(You may hear a clicking noise during the download but this is normal.)
in standby Less than 0.12 W with 120 V AC and less than 0.2 W with 240 V AC
Screen size
(inches measured diagonally)54.6 inches
(55 class)52 inches 46 inches 40 inches
Display resolution  1,920 dots (horizontal) × 1,080 lines (vertical)
Speaker 
Full range with speaker  (mm)
box (2)  (inches)34 × 160
1 
3/8 × 6 3/834 × 100
1 3/8 × 434 × 160
1 3/8 × 6 3/8
Dimensions with stand  (mm)
(inches)1,278 × 797 × 350
50 3/8 × 31 1/2 × 
13 7/8
1,263 × 807 × 400
49 3/4 × 31 7/8 × 
15 3/4
1,124 × 727 × 400
44 3/8 × 28 5/8 × 
15 3/4
1,085 × 688 × 260
42 3/4 × 27 1/8 × 
10 1/4
952 × 613 × 250
37 1/2 × 24 1/4 × 
9 7/8
without stand  (mm)
(inches)1,278 × 765 × 73
50 3/8 × 30 1/8 × 
2 7/8
1,263 × 775 × 67
49 3/4 × 30 5/8 × 
2 3/4
1,124 × 695 × 67
44 3/8 × 27 3/8 × 
2 3/4
1,085 × 656 × 74
42 3/4 × 25 7/8 × 3952 × 581 × 74
37 1/2 × 22 7/8 × 3
wall-mount hole pattern (mm)400 × 300 300 × 300
wall-mount screw size (mm)M6 
(length: refer to diagram on page 15.)
Mass with stand (kg)/(lb.) 26.9/59.3 42.9/94.5 36.2/79.8 19.2/42.3 16.4/36.2
without stand (kg)/(lb.) 22.6/49.8 36.9/81.3 30.2/66.6 16.9/37.3 14.2/31.3
Supplied accessories
See “Checking the accessories” (page 4).
Optional accessories Connecting cables / Support Belt Kit / Wall-Mount Bracket / TV Stand / 3D Glasses (TDG-BR100/TDG-
BR50) / 3D Sync Transmitter (TMR-BR100)