Sony Kdl 40ex520 Operating Instructions

							21GB
D:\Cmengs JOB\SONY TV\SY0331_V2 (Rev-3)\4268265141_GB\GB05OVR.fm
KDL-EX723/EX720/EX523/EX520/EX423/EX420/CX523/CX520
4-268-265-14(1)
Network Setup
Setting up the Internet 
connection
Using the network feature you can connect the 
TV to the Internet. The set-up procedure differs 
depending on the type of network and LAN 
router. Before setting up the Internet connection, 
be sure to set up a LAN router. Check your 
wireless LAN environment using the following 
chart.
Wireless LAN
Wired LAN
 , Type 4
* Type 1 is easier to set up if your router has an 
automatic setting button, e.g. Air Station One-Touch 
Secure System (AOSS). Most of the latest routers 
have this function. Check your router.
Type 1: Follow the configuration for “Secured 
Network with Wi-Fi Protected Set-up (WPS)”.
Type 2: Follow the configuration for “Secured 
Network without Wi-Fi Protected Set-up 
(WPS)”.
Type 3: Follow the configuration for 
“Unsecured Network with Any Type of Wireless 
LAN Router”.
Type 4: Follow the configuration for “Wired 
network set-up”.
Type 1: Secured network with 
Wi-Fi protected Set-up (WPS)
The WPS standard makes security of a wireless 
home network as straightforward as pressing the 
WPS button on the wireless LAN router. Before 
setting up a wireless LAN, check the location of 
the WPS button on the router and verify how to 
use it.For security purpose, “WPS (PIN)” provides a 
PIN code for your router. PIN code is renewed 
every time you select “WPS (PIN)”.
1Press HOME, then select   > 
“Network” > “Network Set-up”.
2Select “Wireless Set-up”.
3Select “WPS (Push Button)” for Push 
Button method or “WPS (PIN)” for PIN 
method.
~
Button name of the WPS may differ depending 
on the router (e.g. AOSS button).
4Follow the instructions on the set-up 
screen.
Type 2: Secured network without 
Wi-Fi protected Set-up (WPS)
To set up a wireless LAN, SSID (wireless 
network name) and security key (WEP or WPA 
key) will be required. If you do not know them, 
consult the instruction manual of your router.
1Press HOME, then select   > 
“Network” > “Network Set-up”.
2Select “Wireless Set-up”.
3Select “Scan”, then select a network 
from the list of scanned wireless 
networks.
4Follow the instructions on the set-up 
screen.
~
If you use WPS for network set-up, the security 
settings of the wireless LAN router activate, and any 
equipment previously connected to the wireless 
LAN in a non-secure status will be disconnected 
from the network.
In this case, activate the security settings of the 
disconnected equipment and then reconnect. Or, you 
can deactivate the security settings of the wireless 
LAN router, and then connect the equipment to a 
TV in a non-secure status.
Secure Wireless LAN?NO
k Type 3
YES m
Do you use a wireless LAN 
router compatible with Wi-Fi 
Protected Set-up (WPS)?NO
k 
Type 2
YES m
Type 1*
(Continued)
 
						

							22GB
D:\Cmengs JOB\SONY TV\SY0331_V2 (Rev-3)\4268265141_GB\GB05OVR.fm
KDL-EX723/EX720/EX523/EX520/EX423/EX420/CX523/CX520
4-268-265-14(1)
Type 3: Unsecured network with 
any type of wireless LAN router
To set up a wireless LAN, SSID (wireless 
network name) will be required.
1Press HOME, then select   > 
“Network” > “Network Set-up”.
2Select “Wireless Set-up”.
3Select “Scan”, then select a network 
from the list of scanned wireless 
networks.
4Follow the instructions on the set-up 
screen.
~
Security key (WEP or WPA key) will not be 
required because you do not need to select any 
security method in this procedure.
Type 4: Wired network set-up
Enter the respective alphanumeric values for 
your router if necessary. The items that need to 
be set (e.g. IP Address, Subnet Mask, DHCP) 
may differ depending on the Internet service 
provider or router. For details, refer to the 
instruction manuals provided by your Internet 
service provider, or those supplied with the 
router.
1Press HOME, then select   > 
“Network” > “Network Set-up”.
2Select “Wired Set-up”.
3Select “Auto” to set the IP Address and 
proxy server automatically, or “Custom” 
to set them manually.
4Follow the instructions on the set-up 
screen.
Viewing the network status
You can confirm your network status.
1Press HOME, then select   > 
“Network” > “Network Set-up”.
2Select “View Network Status”.
If you cannot connect to the 
Internet
Use the diagnosis to check possible causes for 
network connection failures, and settings.
1Press HOME, then select   > 
“Network” > “Network Set-up”.
2Select “View Network Status”.
3Select “Check Connection”.
This may take several minutes. You 
cannot cancel the diagnosis after 
selecting “Check Connection”.
Adjusting the server display 
settings
You can select home network servers to be 
displayed on the Home Menu. Up to 10 servers 
can be displayed in the Home Menu 
automatically.
1Press HOME, then select   > 
“Network” > “Home Network Setup”.
2Select “Server Display Settings”.
3Select the server you want to display on 
the Home Menu, and adjust the settings.
 
						

							23GB
D:\Cmengs JOB\SONY TV\SY0331_V2 (Rev-3)\4268265141_GB\GB05OVR.fm
KDL-EX723/EX720/EX523/EX520/EX423/EX420/CX523/CX520
4-268-265-14(1)
Network Setup
If you cannot connect to your home 
network
The TV detects if the server is being correctly 
recognised when you cannot connect it to your 
home network. If the diagnostic results indicate a 
failure, check possible causes, and network 
connections and settings.
1Press HOME, then select   > 
“Network” > “Home Network Setup”.
2Select “Server Diagnostics”.
The server diagnostic starts. When the server 
diagnostic is complete, the diagnostic result 
list appears.
 
						

							24GB
D:\Cmengs JOB\SONY TV\SY0331_V2 (Rev-3)\4268265141_GB\GB06OPT.fm
KDL-EX723/EX720/EX523/EX520/EX423/EX420/CX523/CX520
4-268-265-14(1)
Troubleshooting
When the 1 (standby) indicator is flashing, count how many times it flashes (interval 
time is three seconds).
Press 1 on the TV to turn it off, disconnect the AC power cord, and inform your dealer or Sony service 
centre of how the indicator flashes (number of flashes).
When the 1 (standby) indicator is not flashing, check the items in the table as follows.
Also refer to “Troubleshooting” in the i-Manual. If the problem persists, have your TV serviced by 
qualified service personnel.
Additional Information
ConditionExplanation/Solution
There is no picture (screen 
is dark) and no sound.Check the antenna/cable connection.
Connect the TV to the AC power and press 1 on the TV.
If the 1 (standby) indicator lights up in red, press "/1.
Tiny black points and/or 
bright points appear on the 
screen.The screen is composed of pixels. Tiny black points and/or bright 
points (pixels) on the screen do not indicate a malfunction.
Some programmes cannot 
be tuned.Check the antenna or dish.
The TV turns off 
automatically (the TV 
enters standby mode).Check if the “Sleep Timer” is activated, or confirm the “Duration” 
setting of “On Timer”.
Check if the “Idle TV Standby” is activated.
Check if the “Presence Sensor” is activated. When no viewer is 
detected in front of the TV for a preset time, the picture automatically 
turns off, while leaving only the TV sound on. Additionally, after 30 
minutes in picture off mode, the TV will switch to standby mode.
The remote does not 
function.Replace the batteries.
Your TV may be in SYNC mode. 
Press SYNC MENU, select “TV Control” and then select “Home 
(Menu)” or “Options” to control the TV.
The “Parental Lock” 
password has been 
forgotten.Enter 9999 for the PIN code. (PIN code 9999 is always accepted.)
The TV surrounds become 
warm.When the TV is used for an extended period, the TV surrounds 
become warm.
You may feel hot when touching there by the hand.
 
						

							25GB
D:\Cmengs JOB\SONY TV\SY0331_V2 (Rev-3)\4268265141_GB\GB06OPT.fm
KDL-EX723/EX720/EX523/EX520/EX423/EX420/CX523/CX520
4-268-265-14(1)
Additional Information
Specifications
System
Panel system
LCD (Liquid Crystal Display) Panel
TV systemAnalogue: B/G, I, D/K, M, L
Digital: DVB–T
Colour/video systemAnalogue: PAL, PAL60 (only video input), SECAM, NTSC3.58, NTSC4.43 (only video input)
Digital: MPEG-2 MP@ML/HL, MPEG-2 MP@ML/HL, H.264/MPEG-4 AVC MP/HP@L4
Channel coverageAnalogue: VHF: E2–E12/UHF: E21–E69/CATV: S01–S03, S1–S41
VHF: 0–12, 5A, 9A/UHF: 28–69/CATV: S01–S03, S1–S44 (Australia)
VHF: 1–11 (New Zealand)
D/K: VHF: R1–R12, R21–R69/L: F2–F10, B–Q, F21–F69/I: UHF B21–B69/M: A2–A13, 
A14–A79
Digital: VHF/UHF, UHF (New Zealand only)
Sound output10 W + 10 W + 10 W (KDL-60EX720)
10 W + 10 W (KDL-55/46/40/32EX72x, KDL-46/40/32EX52x, KDL-46/40/32CX52x, KDL-32EX420)
8 W + 8 W (KDL-26/22EX42x)
Input/Output jacks
Antenna (aerial)/cable
75 ohm external terminal for VHF/UHF
/2COMPONENT IN
Supported formats: 1080p, 1080i, 720p, 576p, 576i, 480p, 480i
2 Video input (phono jacks)
COMPONENT INAudio input (phono jacks)
HDMI IN1, 2, 3, 4 
(except KDL-26/22EX42x)Video: 1080/24p/30p, 1080p, 1080i, 720/24p/30p, 720p, 576p, 576i, 480p, 480i
Audio: Two channel linear PCM: 32, 44.1 and 48 kHz, 16, 20 and 24 bits, Dolby Digital
 Analogue audio input (minijack) (HDMI IN4 only)
ARC (Audio Return Channel) (HDMI IN 1 only)
PC Input
HDMI IN1, 2
(for KDL-26/22EX42x)Video: 1080/24p/30p, 1080p, 1080i, 720/24p/30p, 720p, 576p, 576i, 480p, 480i
Audio: Two channel linear PCM: 32, 44.1 and 48 kHz, 16, 20 and 24 bits
 Analogue audio input (minijack) (HDMI IN2 only)
ARC (Audio Return Channel) (HDMI IN 1 only)
PC Input
1Video input (phono jack)
1Audio input (phono jacks)
 DIGITAL AUDIO OUT 
(OPTICAL)Digital optical jack (Two channel linear PCM, Dolby Digital)
 AUDIO OUT/iAudio output (phono jacks)
Headphones jack
PC INPC Input (Mini D-sub 15-pin)
 PC audio input (minijack)
USB port
LAN10BASE-T/100BASE-TX connector (Depending on the operating environment of the network, connection 
speed may differ. 10BASE-T/100BASE-TX communication rate and communication quality are not 
guaranteed for this TV.)
Model name KDL-60EX72055EX72x46EX72x46EX52x46CX52x40EX72x40EX52x40CX52x
Power and others
Power requirements
110 V – 240 V AC, 50/60 Hz
Screen size (measured 
diagonally)Approx. 
152.5 cm/
60 inchesApprox. 
138.8 cm/
55 inchesApprox. 116.8 cm/46 inches Approx. 101.6 cm/40 inches
Display resolution1,920 dots (horizontal) × 1,080 lines (vertical)
Power consumptionIndicated on the rear of the TV
Dimensions (Approx.) (w × h × d) 
with Table-Top Stand (mm)
1389 × 869 
× 3201269 × 799 
× 3151078 × 690 
× 2601078 × 690 
× 2601122 × 712 
× 275943 × 616 × 250991 × 636 
× 250
without Table-Top Stand 
(mm)1389 × 839 
× 411269 × 769 
× 411078 × 660 
× 421078 × 660 
× 421122 × 682 
× 74943 × 586 × 42991 × 606 
× 71
Mass (Approx.)
with Table-Top Stand (kg)
31.6 25.4 17.9 17.8 20.7 14.4 16.3
without Table-Top Stand 
(kg)25.3 20.2 14.3 14.2 17.1 11.2 12.9
(Continued)
 
						

							26GB
D:\Cmengs JOB\SONY TV\SY0331_V2 (Rev-3)\4268265141_GB\GB06OPT.fm
KDL-EX723/EX720/EX523/EX520/EX423/EX420/CX523/CX520
4-268-265-14(1) *
1Except Australia model
*2Australia model
Design and specifications are subject to change without notice.
Supplied accessoriesSee “Checking the accessories” (page 6).
Optional accessoriesWall-Mount Bracket: SU-WL50B
USB Wireless LAN Adaptor
3D Glasses: TDG-BR250, TDG-BR200, TDG-BR100, TDG-BR50 (for KDL-55/46/40EX723, 
KDL-60/55/46/40EX720)
Operating temperature0 ºC – 40 ºC
Operating humidity10 % – 80 % RH (non-condensing)
Model name KDL-32EX72x32EX52x32CX52x32EX420*132EX420*226EX42x22EX42x
Power and others
Power requirements
110 V – 240 V AC, 50/60 Hz
Screen size (measured 
diagonally)Approx. 80.1 cm/32 inches Approx. 
66.1 cm/
26 inchesApprox. 
54.8 cm/ 
22 inches
Display resolution1,920 dots (horizontal) × 1,080 lines (vertical) 1,366 dots (horizontal) × 768 lines (vertical)
Power consumptionIndicated on the rear of the TV
Dimensions (Approx.) (w × h × d) 
with Table-Top Stand (mm)
755 × 510 × 216799 × 532 × 
230755 × 510 × 
216755 × 498 × 
225631 × 421 × 
182529 × 362 × 
172
without Table-Top Stand 
(mm)755 × 480 × 42799 × 502 × 
70755 × 480 × 
42755 × 482 × 
42631 × 406 × 
42529 × 347 × 
42
Mass (Approx.)
with Table-Top Stand (kg)
10.4 10.2 11.4 10.2 9.9 7.2 5.1
without Table-Top Stand 
(kg)7.9 7.7 8.7 7.7 7.7 6.1 4.1
Supplied accessoriesSee “Checking the accessories” (page 6).
Optional accessoriesWall-Mount Bracket: SU-WL50B (for KDL-32EX723, KDL-32EX720, KDL- 32EX523, 
KDL-32EX520, KDL-32CX523, KDL-32CX520)
SU-WL100 (for KDL-26/22EX423, KDL-26/22EX420)
USB Wireless LAN Adaptor
3D Glasses: TDG-BR250, TDG-BR200, TDG-BR100, TDG-BR50 (for KDL-32EX723, KDL-32EX720)
Operating temperature0 ºC – 40 ºC 
Operating humidity10 % – 80 % RH (non-condensing)
Model name KDL-60EX72055EX72x46EX72x46EX52x46CX52x40EX72x40EX52x40CX52x
 
						

							27GB
D:\Cmengs JOB\SONY TV\SY0331_V2 (Rev-3)\4268265141_GB\GB06OPT.fm
KDL-EX723/EX720/EX523/EX520/EX423/EX420/CX523/CX520
4-268-265-14(1)
Additional Information
Installing the Accessories (Wall-Mount Bracket)
To Customers:
When using SU-WL50B and SU-WL100 Wall-Mount Bracket, the space between the wall and the TV 
will be 6 cm. Use this space to route cables to the TV.
For product protection and safety reasons, Sony strongly recommends that installing of your TV be 
performed by Sony dealers or licensed contractors. Do not attempt to install it yourself.
To Sony Dealers and Contractors:
Provide full attention to safety during the installation, periodic maintenance and examination of this 
product.
Your TV can be installed using the SU-WL50B and SU-WL100 Wall-Mount Bracket (sold separately).
 Refer to the Instructions supplied with the Wall-Mount Bracket to properly carry out the installation.
 Refer to “Detaching the Table-Top Stand from the TV” (page 8).
Sufficient expertise is required for installing this product, especially to determine the strength of the 
wall for withstanding the TV’s weight. Be sure to entrust the attachment of this product to the wall to 
Sony dealers or licensed contractors and pay adequate attention to safety during the installation. Sony 
is not liable for any damage or injury caused by mishandling or improper installation.
6cm
Wall
(Continued)
 
						

							28GB
D:\Cmengs JOB\SONY TV\SY0331_V2 (Rev-3)\4268265141_GB\GB06OPT.fm
KDL-EX723/EX720/EX523/EX520/EX423/EX420/CX523/CX520
4-268-265-14(1)
SU-WL50B and SU-WL100
When installing the base bracket on the wall (for SU-WL50B): 
1Install one side of each plate to the upper bracket and the other side to the lower bracket.
2Attach the base bracket to the wall.
3Remove the plates. (except KDL-60EX720, KDL-55EX723, KDL-55EX720)
~
Be sure to store the plates in a safe place after use.
When installing the TV on a wall, remove the screws from the rear of the TV. The screws and number of screws are 
available depending on the TV model (They are fastened in the screw holes for wall mounting.) Be sure to store the 
removed screws in a safe place, keeping them away from children.
~
When removing the Table-Top Stand from the TV, lay the display face down on a stable work surface that is 
larger than the TV.
To prevent damaging the surface of the LCD display, make sure to place a soft cloth on the work surface.
b
c
c
b
a aabcc
bab
c
c
b
a a
×2
×2
×2
×4
BFor KDL-46/40/32EX72x, 
KDL-46/40/32EX52x, 
KDL-32EX42x BFor KDL-60EX720, KDL-55EX72x
Soft cloth
Soft cloth
 
						

							29GB
D:\Cmengs JOB\SONY TV\SY0331_V2 (Rev-3)\4268265141_GB\GB06OPT.fm
KDL-EX723/EX720/EX523/EX520/EX423/EX420/CX523/CX520
4-268-265-14(1)
Additional Information
KDL-55/46/40/32EX723, KDL-60/55/46/32EX720, KDL-46/40/32EX523, KDL-46/40/32EX520, 
KDL-46/40/32CX523, KDL-46/40/32CX520 and KDL-32EX420
~
Attach the Mounting Hook using four screws supplied with the Wall-Mount Bracket.
When attaching the Table-Top Stand again, be sure to fasten the screws (previously removed) to the original 
holes on the rear of the TV.
×4
Mounting 
HookScrew 
(+PSW 
6 × 16) SU-WL50B
Soft cloth
Mounting 
HookScrew 
(+PSW 
4 × 12) SU-WL100
Soft cloth KDL-26/22EX423 and KDL-26/22EX420
(Continued)
 
						

							30GB
D:\Cmengs JOB\SONY TV\SY0331_V2 (Rev-3)\4268265141_GB\GB06OPT.fm
KDL-EX723/EX720/EX523/EX520/EX423/EX420/CX523/CX520
4-268-265-14(1)
Screw and Hook locations diagram/table
SU-WL50B
Model Name 
KDL-Screw locationHook location
SU-WL50B SU-WL50B
60EX720
d, i a
55EX72xe, j b
46EX72x/46EX52xe, j b
46CX52xd, i b
40EX72x/40EX52xe, j b
40CX52xd, i b
32EX72x/32EX52xe, h c
32EX420e, h c
32CX52xe, h c
SU-WL100
26EX42x
a
22EX42xb
abccba
Screw location
When installing the Mounting Hook on the 
TV.Hook location
When installing the TV onto the Base Bracket.
b a
c
Mounting HookBase Bracket