Sony Kdl 40ex43b Operating Instructions

							11GB
Additional Information
Specifications
System
Panel system
LCD (Liquid Crystal Display) Panel
TV systemAnalogue: Depending on your country/area selection: B/G/H, D/K, L, I
Digital: DVB-T2/DVB-T/DVB-C
Colour/video systemAnalogue: PAL, PAL60 (only video input), SECAM, NTSC3.58, NTSC4.43 (only video input)
Digital: MPEG-2 MP@ML/HL, H.264/MPEG-4 AVC MP/HP@L4
Channel coverageAnalogue: VHF: E2–E12/UHF: E21–E69/CATV: S1–S20/HYPER: S21–S41
D/K: R1–R12, R21–R69/L: F2–F10, B–Q, F21–F69/I: UHF B21–B69
Digital: VHF/UHF
Sound output10 W + 10 W
Input/Output jacks
Antenna (aerial) cable
75 ohm external terminal for VHF/UHF
/ AV1, 221-pin scart connector (CENELEC standard) including audio/video input, RGB input and TV audio/video 
output.
COMPONENT INSupported formats: 1080p, 1080i, 720p, 576p, 576i, 480p, 480i
COMPONENT INAudio input (phono jacks)
HDMI IN1, 2, 3Video: 1080/24p, 1080p, 1080i, 720p, 576p, 576i, 480p, 480i
Audio: Two channel linear PCM: 32, 44.1 and 48 kHz, 16, 20 and 24 bits, Dolby Digital
Analogue audio input (minijack) (HDMI IN 1 only)
AV3Video input (phono jack)
AV3Audio input (phono jacks)
 DIGITAL AUDIO OUT 
(OPTICAL)Digital optical jack (Two channel linear PCM, Dolby Digital, DTS Digital)
 (VAR/FIX)Audio output (phono jacks)
PC INPC Input (Mini D-sub 15-pin)
 PC audio input (minijack)
USB port
iHeadphones jack
CAM (Conditional Access Module) slot
LAN10BASE-T/100BASE-TX connector (Depending on the operating environment of the network, 
connection speed may differ. 10BASE-T/100BASE-TX communication rate and communication quality 
are not guaranteed for this TV.)
* For LAN connections, use a Category 7 10BASE-T/100BASE-TX cable (not supplied).
EXTExternal memory slot (For connecting the USB memory)
DC output: 5 V 500 mA Max
(Continued)
 
						

							12GB
*1Specified standby power is reached after the TV finishes necessary internal processes.
*24 hours a days and 365 days a year
~
To save power consumption
–when you reduce backlight setting (the brightness of the screen), the power consumption reduce.
–the “Eco” settings (e.g. “Power Saving”, “Idle TV Standby”) help you to reduce the power consumption and 
thus save money by reducing electricity bills.
Design and specifications are subject to change without notice.
Model name KDL-40EX43B32EX43B
Power and others
Power requirements
220 V – 240 V AC, 50 Hz
Screen size (measured 
diagonally)Approx. 101.6 cm/40 inches Approx. 80.1 cm/32 inches
Display resolution1,920 dots (horizontal) × 1,080 lines (vertical)
Power 
consumptionin “Home”/
“Standard” 
mode107 W 72 W
in “Shop”/
“Vivid” mode176 W 128 W
Standby power 
consumption*10.2 W (17 W when “Quick Start” is set to “On”) 0.2 W (17 W when “Quick Start” is set to “On”)
Average annual energy 
consumption*2156 kWh 105 kWh
LaserType: Semiconductor, continuous
BD Wavelength: 400 - 410 nm
Power: Max 20 mW
DVD Wavelength: 650 - 663 nm
Power: Max 7 mW
CD Wavelength: 770 - 800 nm
Power: Max 7 mW
Dimensions (Approx.) (w × h × d) 
with Table-Top Stand
99.2 × 63.6 × 28.0 cm 80.0 × 53.4 × 25.0 cm
without Table-Top Stand99.2 × 59.8 × 11.6 cm 80.0 × 49.7 × 11.3 cm
Mass (Approx.)
with Table-Top Stand
18.0 kg 13.2 kg
without Table-Top Stand15.1 kg 11.2 kg
Supplied accessoriesSee “Checking the accessories” (page 3).
Optional accessoriesWall-Mount Bracket: SU-WL500
Operating temperature5 ºC to 35 ºC (41 °F to 95 °F)
 
						

							13GB
Additional Information
Installing the Accessories (Wall-Mount Bracket)
To Customers:
For product protection and safety reasons, Sony strongly recommends that installing of your TV be 
performed by Sony dealers or licensed contractors. Do not attempt to install it yourself.
To Sony Dealers and Contractors:
Provide full attention to safety during the installation, periodic maintenance and examination of this 
product.
Your TV can be installed using the SU-WL500 Wall-Mount Bracket (sold separately).
 Do not install the TV in an inclined position. It is designed to be operated in a vertical position 
only. Eject and take out any disc from the built-in BD player before installing the TV on a wall.
 Refer to the Instructions supplied with the Wall-Mount Bracket to properly carry out the 
installation.
 Refer to “Detaching the Table-Top Stand from the TV” (page 6).
~
Place the TV on the Table-Top Stand, when securing the Mounting Hook.
Sufficient expertise is required for installing this product, especially to determine the strength of 
the wall for withstanding the TV’s weight. Be sure to entrust the attachment of this product to the 
wall to Sony dealers or licensed contractors and pay adequate attention to safety during the 
installation. Sony is not liable for any damage or injury caused by mishandling or improper 
installation.
Mounting Hook Square holeScrew
(+PSW
6 × 16)
(Continued)
 
						

							14GB
TV installation dimensions table
Unit: cm
Figures in the above table may differ slightly depending on the installation.
The wall that the TV will be installed on should be capable of supporting a weight of at least four 
times that of the TV. Refer to “Specifications” (page 12) for its weight.
Model Name 
KDL-Display dimensionsScreen centre dimension
Length for each mounting 
angle
Angle (0°)
AB CDE
40EX43B
99.2  59.8  12.2 42.5 16.0
32EX43B80.0 49.7 17.2 42.6 15.7
Screen centre point
WARNING
 
						

							15GB
Additional Information
Screw and Hook locations diagram/table
Model NameScrew locationHook location
KDL-40EX43B d, g b
KDL-32EX43B e, g c
Screw location
When installing the Mounting Hook on the 
TV.Hook location
When installing the TV onto the Base Bracket.
b a
*
c
* Hook location “a” cannot be 
used for the models.
 
						

							16GB
Safety 
Information
Installation/Set-upInstall and use the TV set in accordance 
with the instructions below in order to 
avoid any risk of fire, electrical shock or 
damage and/or injuries.
InstallationThe TV set should be installed near an 
easily accessible mains socket.
Place the TV set on a stable, level 
surface.
Only qualified service personnel should 
carry out wall installations.
For safety reasons, it is strongly 
recommended that you use Sony 
accessories, including:
–Wall-mount bracket SU-WL500
Be sure to use the screws supplied with 
the Wall-mount bracket when attaching 
the mounting hooks to the TV set. The 
supplied screws are designed so that they 
are 8 mm to 12 mm in length when 
measured from the attaching surface of 
the mounting hook. 
The diameter and length of the screws 
differ depending on the Wall-mount 
bracket model. 
Use of screws other than those supplied 
may result in internal damage to the TV 
set or cause it to fall, etc.
TransportingBefore 
transporting the 
TV set, disconnect 
all cables.
Two or three 
people are needed 
to transport a large 
TV set.
When transporting 
the TV set by 
hand, hold it as 
shown on the 
right. Do not put 
stress on the LCD 
panel and the 
frame around the 
screen.
When lifting or moving the TV set, hold 
it firmly from the bottom.
When transporting the TV set, do not 
subject it to jolts or excessive vibration.
When transporting the TV set for repairs 
or when moving, pack it using the 
original carton and packing material.
VentilationNever cover the ventilation holes or 
insert anything in the cabinet.
Leave space around the TV set as shown 
below.
It is strongly recommended that you use 
a Sony wall-mount bracket in order to 
provide adequate air-circulation.
Installed on the wall
Installed with stand
To ensure proper ventilation and prevent 
the collection of dirt or dust:
–Do not lay the TV set flat, install 
upside down, backwards, or 
sideways.
–Do not place the TV set on a shelf, 
rug, bed or in a closet.
–Do not cover the TV set with a cloth, 
such as curtains, or items such as 
newspapers, etc.
–Do not install the TV set as shown 
below.
Mains lead
Handle the mains lead and socket as 
follows in order to avoid any risk of fire, 
electrical shock or damage and/or injuries:
–Use only mains leads supplied by 
Sony, not other suppliers.
–Insert the plug fully into the mains 
socket.
–Operate the TV set on a 220-240 V AC 
supply only.
–When wiring cables, be sure to unplug 
the mains lead for your safety and take 
care not to catch your feet on the 
cables.
–Disconnect the mains lead from the 
mains socket before working on or 
moving the TV set.
–Keep the mains lead away from heat 
sources.–Unplug the mains plug and clean it 
regularly. If the plug is covered with 
dust and it picks up moisture, its 
insulation may deteriorate, which 
could result in a fire. 
NotesDo not use the supplied mains lead on 
any other equipment.
Do not pinch, bend, or twist the mains 
lead excessively. The core conductors 
may be exposed or broken.
Do not modify the mains lead.
Do not put anything heavy on the mains 
lead.
Do not pull on the mains lead itself when 
disconnecting the mains lead.
Do not connect too many appliances to 
the same mains socket.
Do not use a poor fitting mains socket.
Prohibited Usage
Do not install/use the TV set in locations, 
environments or situations such as those 
listed below, or the TV set may 
malfunction and cause a fire, electrical 
shock, damage and/or injuries.
Location:Outdoors (in direct sunlight), at the 
seashore, on a ship or other vessel, inside a 
vehicle, in medical institutions, unstable 
locations, near water, rain, moisture or 
smoke.
Environment:Places that are hot, humid, or excessively 
dusty; where insects may enter; where it 
might be exposed to mechanical vibration, 
near flammable objects (candles, etc). The 
TV set shall not be exposed to dripping or 
splashing and no objects filled with 
liquids, such as vases, shall be placed on 
the TV.
Situation:Do not use when your hands are wet, with 
the cabinet removed, or with attachments 
not recommended by the manufacturer. 
Disconnect the TV set from mains socket 
and aerial during lightning storms.
Broken pieces:Do not throw anything at the TV set. The 
screen glass may break by the impact 
and cause serious injury.
If the surface of the TV set cracks, do 
not touch it until you have unplugged the 
mains lead. Otherwise electric shock 
may result.
CondensationIf the TV is brought directly from a cold to 
a warm location, or is placed in a very 
damp room, or is placed in a room in 
which heating has just been turned on, 
moisture may condense on the surface or 
inside the TV. Should this occur, turn off 
the TV and leave the TV off until the 
moisture evaporates, and then the TV can 
be used. If a disc is inserted in the built-in 
BD player, eject and take out the disc and 
turn off the TV. Using the TV with 
moisture in or on it may cause the TV to 
show poor picture and/or poor colour or 
may cause a malfunction.
Mounting Hook
Hook attachment on rear 
of TV set Screw (supplied with the 
Wall-mount bracket) 8 mm - 12 mm
30 cm
10 cm 10 cm
10 cm
Leave at least this space around 
the set.
30 cm
10 cm
10 cm6 cm
Leave at least this space around 
the set.
Air circulation is blocked.
Wall Wall
 
						

							17GB
Additional Information
When not in useIf you will not be using the TV set for 
several days, the TV set should be 
disconnected from the mains for 
environmental and safety reasons. 
As the TV set is not disconnected from 
the mains when the TV set is just turned 
off, pull the plug from the mains to 
disconnect the TV set completely.
However, some TV sets may have 
features that require the TV set to be left 
in standby to work correctly.
For childrenDo not allow children to climb on the 
TV set.
Keep small accessories out of the reach 
of children, so that they are not 
mistakenly swallowed. 
Be sure small children do not put hands 
into the disc slot. It may cause injury.
If the following problems 
occur...
Turn off the TV set and unplug the mains 
lead immediately if any of the following 
problems occur.
Ask your dealer or Sony service centre to 
have it checked by qualified service 
personnel.
When:–Mains lead is damaged.
–Poor fitting of mains socket.
–TV set is damaged by being dropped, 
hit or having something thrown at it.
–Any liquid or solid object falls through 
openings in the cabinet.
WarningTo prevent the spread of fire, keep candles 
or other open flames away from this 
product at all time.
Precautions
Viewing the TVView the TV in moderate light, as 
viewing the TV in poor light or during 
long period of time, strains your eyes.
When using headphones, adjust the 
volume so as to avoid excessive levels, 
as hearing damage may result.
LCD ScreenAlthough the LCD screen is made with 
high-precision technology and 99.99% 
or more of the pixels are effective, black 
dots may appear or bright points of light 
(red, blue, or green) may appear 
constantly on the LCD screen. This is a 
structural property of the LCD screen 
and is not a malfunction.
Do not push or scratch the front filter, or 
place objects on top of this TV set. The 
image may be uneven or the LCD screen 
may be damaged.If this TV set is used in a cold place, a 
smear may occur in the picture or the 
picture may become dark. This does not 
indicate a failure. These phenomena 
disappear as the temperature rises.
Ghosting may occur when still pictures 
are displayed continuously. It may 
disappear after a few moments.
The screen and cabinet get warm when 
this TV set is in use. This is not a 
malfunction.
The LCD screen contains a small 
amount of liquid crystal. Some 
fluorescent tubes used in this TV set also 
contain mercury. Follow your local 
ordinances and regulations for disposal.
Handling and cleaning the 
screen surface/cabinet of 
the TV set
Be sure to unplug the mains lead 
connected to the TV set from mains socket 
before cleaning.
To avoid material degradation or screen 
coating degradation, observe the following 
precautions.
To remove dust from the screen surface/
cabinet, wipe gently with a soft cloth. If 
dust is persistent, wipe with a soft cloth 
slightly moistened with a diluted mild 
detergent solution.
Do not spray water or detergent directly 
on the TV set. It may drip to the bottom 
of the screen or exterior parts, and may 
cause a malfunction.
Never use any type of abrasive pad, 
alkaline/acid cleaner, scouring powder, 
or volatile solvent, such as alcohol, 
benzene, thinner or insecticide. Using 
such materials or maintaining prolonged 
contact with rubber or vinyl materials 
may result in damage to the screen 
surface and cabinet material.
Periodic vacuuming of the ventilation 
openings is recommended to ensure to 
proper ventilation.
When adjusting the angle of the TV set, 
move it slowly so as to prevent the TV 
set from moving or slipping off from its 
table stand.
Optional EquipmentKeep optional components or any 
equipment emitting electromagnetic 
radiation away from the TV set. 
Otherwise picture distortion and/or noisy 
sound may occur.
This equipment has been tested and 
found to comply with the limits set out in 
the EMC Directive using a connection 
signal cable shorter than 3 meters.
BatteriesObserve the correct polarity when 
inserting batteries.
Do not use different types of batteries 
together or mix old and new batteries.
Dispose of batteries in an 
environmentally friendly way. Certain 
regions may regulate the disposal of 
batteries. Please consult your local 
authority.
Handle the remote with care. Do not 
drop or step on it, or spill liquid of any 
kind onto it.
Do not place the remote in a location 
near a heat source, a place subject to 
direct sunlight, or a damp room.
Disposal of the TV set
Disposal of Old 
Electrical & 
Electronic 
Equipment 
(Applicable in 
the European 
Union and other European 
countries with separate 
collection systems)
This symbol on the product or on its 
packaging indicates that this product shall 
not be treated as household waste. Instead 
it shall be handed over to the applicable 
collection point for the recycling of 
electrical and electronic equipment. By 
ensuring this product is disposed of 
correctly, you will help prevent potential 
negative consequences for the 
environment and human health, which 
could otherwise be caused by 
inappropriate waste handling of this 
product. The recycling of materials will 
help to conserve natural resources. For 
more detailed information about recycling 
of this product, please contact your local 
Civic Office, your household waste 
disposal service or the shop where you 
purchased the product.
Disposal of 
waste batteries 
(applicable in the 
European Union 
and other 
European 
countries with separate 
collection systems)
This symbol on the battery or on the 
packaging indicates that the battery 
provided with this product shall not be 
treated as household waste. On certain 
batteries this symbol might be used in 
combination with a chemical symbol. The 
chemical symbols for mercury (Hg) or 
lead (Pb) are added if the battery contains 
more than 0.0005% mercury or 0.004% 
lead. By ensuring these batteries are 
disposed of correctly, you will help 
prevent potentially negative consequences 
for the environment and human health 
which could otherwise be caused by 
inappropriate waste handling of the 
battery. The recycling of the materials will 
help to conserve natural resources. In case 
of products that for safety, performance or 
data integrity reasons require a permanent 
connection with an incorporated battery, 
this battery should be replaced by qualified 
service staff only. To ensure that the 
battery will be treated properly, hand over 
the product at end-of-life to the applicable 
collection point for the recycling of 
electrical and electronic equipment. For all 
other batteries, please view the section on 
how to remove the battery from the 
product safely. Hand the battery over to 
the applicable collection point for the 
recycling of waste batteries. For more 
detailed information about recycling of 
this product or battery, please contact your 
local Civic Office, your household waste 
disposal service or the shop where you 
purchased the product.
 
						

							18GB
Safety 
information about 
built-in BD player
The use of optical instruments with this 
product will increase eye hazard. As the 
laser beam used in this built-in BD/DVD 
player is harmful to eyes, do not attempt 
to disassemble the cabinet.
Refer servicing to qualified personnel 
only.
This label is located on the laser 
protective housing inside the enclosure.
This appliance is classified as a CLASS 
1 LASER product. The CLASS 1 
LASER PRODUCT MARKING is 
located on the laser protective housing 
inside the enclosure.
To keep the disc clean, handle the disc 
by its edge. Do not touch the surface. 
Dust, fingerprints, or scratches on the 
disc may cause it to malfunction.
Do not use the following discs.
–A lens cleaning disc.
–A disc that has a nonstandard shape 
(e.g., card, heart).
–A disc with a label or sticker on it.
–A disc that has cellophane tape or 
sticker adhesive on it.
Do not resurface the playing side of a 
disc to remove surface scratches.
When ejecting a disc from the built-in 
BD player by pressing Z on the TV, be 
sure to take out the disc from the disc 
slot. Do not leave the disc in the disc 
slot.
Eject and take out the disc from the disc 
slot and turn off the TV when not using 
the TV.
Do not expose the disc to direct sunlight 
or heat sources such as hot air ducts, or 
leave it in a car parked in direct sunlight 
as the temperature may rise considerably 
inside the car.
After playing, store the disc in its case.
Clean the disc with a cleaning cloth. 
Wipe the disc from the centre out.Do not use solvents such as benzine, 
thinner, commercially available disc/
lens cleaners, or anti-static spray 
intended for vinyl LPs.
If you have printed the disc’s label, dry 
the label before playing.
Do not force a disc into the disc slot. 
When there is already a disc inside the 
built-in BD player, trying to insert 
another disc may cause malfunction.
Sound may jump or picture distortion 
may occur if a lens is dirty with dust. For 
repair, contact the shop from which the 
product was purchased or a customer 
information service centre.
Precautions 
about built-in BD 
player
The TV has a region code located on the 
rear of the unit.
Do not use cleaning discs or disc/lens 
cleaners (including wet or spray types). 
These may cause the apparatus to 
malfunction.
When ejecting a disc, the disc may hit 
objects and cause damage or injury. 
Keep an open space around the disc slot.
Take out any discs from the built-in BD 
player when you move the TV. If you 
don’t, the disc may be damaged. Eject 
and take out the disc before moving the 
TV.
Do not pull out the AC power cord 
(mains lead) while the built-in BD player 
is playing.
 
						

							19GB
Additional Information
Television in the UK is going digital, bringing us all more.
Please see overleaf to find out when your area switches to digital.
Digital UK is the independent, non-profit organisation leading the process of digital TV switchover 
in the UK. Digital UK provides impartial information on what people need to do to prepare for the 
move to digital, and when they need to do it.
How the switchover affects your TV equipment:
Your new TV has a digital tuner built in, which means it is ready to receive the Freeview signal by 
simply plugging it into your aerial socket (check if you can get digital TV through your aerial now, 
or whether youll have to wait until switchover, at www.digitaluk.co.uk).
When the TV switchover happens in your area, there are at least two occasions when you will need 
to re-tune your TV in order to continue receiving your existing TV channels, and also to pick up new 
ones. Digital UK, the body leading the digital TV switchover, will advise you when you need to re-
tune during the switchover.
Keep this Instruction 
manual safe you’ll
need it
 
						

							20GB
How to re-tune:
1Press HOME on the remote
2Press G/g to select Settings
3Press F/f to select Digital Set-up, then press 
4 Press   to select Digital Auto Tuning
5Press G to select Yes then press   to start Digital Auto Tuning
6 Follow the on screen instructions.
If you are missing any channels, it may be that they are not available in your area, or that your aerial 
needs upgrading.
If you have any questions, please contact Sony on 08705 111 999 or call Digital UK on 0845 6 50 50 
50 or visit www.digitaluk.co.uk
†Calls charged at BT rate of 3p per minute daytime and 1p per minute evenings and weekends. 
Rates may vary for calls from non-BT lines.