Sony Kdl 32w5500 Operating Instructions

							31 GB
C:\Documents and Settings\Dolors\Mis documentos\€9\EX2L_CORREC 
PARAL\11_UK_EX2L\NET.fmmasterpage:Left
KDL-52/46/40/37/32V5500
x-xxx-xxx-xx(x)
Using Home Network Features
Checking the Network 
Connection
Enter the respective (alphanumeric) values for 
your router. The items that need to be set may 
differ, depending on the Internet service 
provider or the router. For details, refer to the 
instruction manuals that have been provided 
by your Internet service provider or supplied 
with the router.
1Press HOME.
2Press G to select “Settings”.
3Press F/f to select “Network Settings”, 
then press  .
4Select “Network”, then press  .
5Select “IP Address Settings”, then press 
.
6Select an item, and press  .
When you select “DHCP (DNS 
automatic)”
Go to step 7.
When you select “DHCP (DNS manual)”
Set “Primary DNS”/“Secondary DNS” 
using F/f/g and the number buttons. 
When you select “Manual”
Set the following items using F/f/g and 
the number buttons.
•IP Address
• Subnet Mask
• Default Gateway
• Primary DNS/Secondary DNS
If your ISP has a specific proxy server 
setting
Press OPTIONS, then press F/f to select 
“Proxy Set-up” and press  . Then enter 
the settings.
7Press .
8Press g to select “Test”, then press  .
9Press G/g to select “Yes”, then press  .
The network diagnostic starts.
When the message “Connection 
successful.” appears, press 
 RETURN 
repeatedly to exit.
z
If “Connection successful.” does not appear, see 
“Troubleshooting” (page 52).
Adjusting the Server 
Display Settings
You can select home network servers to be 
displayed on the Home Menu.
Up to 10 servers can be displayed on the Home 
Menu automatically.
1Set the server to allow connections from 
the TV.
For details on settings on the server, refer 
to the Operating Instructions supplied 
with the server.
2Press HOME.
3Press G/g to select “Settings”.
4Press F/f to select “Network Settings”, 
then press  .
5Select “Server Display Settings”, then 
press .
6Select the server you want to display on 
the Home Menu, then press  .
7Select “Yes”, then press  .
If you cannot connect to your home 
network
The TV can check if the server is being 
correctly recognised.
1Press HOME.
2Press G/g to select “Settings”.
3Press F/f to select “Network Settings”, 
then press  .
4Select “Server Diagnostics”, then press 
.
5Select “Yes”, then press  .
The server diagnostic starts.
When the server diagnostic is complete, 
the diagnostic result list appears.
6Select the server you want to confirm, 
then press  .
The diagnostic results of the selected 
server appear.
If the diagnostic results indicate a failure, 
look up the possible causes and what to 
do, and check connections and settings.
For details, see “Troubleshooting” 
(page 52).
010COV.book  Page 31  Tuesday, January 20, 2009  5:15 PM
 
						

							C:\Documents and Settings\Dolors\Mis documentos\€9\EX2L_CORREC 
PARAL\11_UK_EX2L\MEN.fmmasterpage:Left
32 GB
KDL-52/46/40/37/32V5500
x-xxx-xxx-xx(x)
Using Menu Functions
Navigating through TV Home Menu on XMB™
The XMB™ (XrossMediaBar) is a menu of BRAVIA features and input sources displayed on the 
TV screen. The XMB™ is an easy way to select programming and adjust settings on your BRAVIA 
TV.
1Press HOME to display the XMB™.
2Press G/g to select the category.
3Press F/f to select the item, then press  .
4Follow the instructions on the screen.
5Press HOME to exit.
~
• The options you can adjust vary depending on the situation.
• Unavailable options are greyed out or not displayed.
Media category iconDescription
SettingsYou can make advanced settings and adjustments (page 33).
PhotoYou can enjoy photo files via USB devices or the network (page 25, 
30).
MusicYou can enjoy music files via USB devices or the network (page 25, 
30).
VideoYou can enjoy video files via USB devices or the network (page 25, 
30).
DigitalYou can select a digital channel, Digital Favourite list (page 21), or 
GUIDE Plus+™ System and the Digital Electronic Programme 
Guide (EPG) (page 17, 20).
AnalogueYou can select an analogue channel or Analogue Favourite list 
(page 21).
To hide the list of analogue channels, set “Programme List Display” 
to “Off” (page 40).
External InputsYou can select equipment connected to the TV.
To assign a label to an external input, see “AV Preset” (page 39).
NetworkYou can enjoy “AppliCast” (page 29).
Category Object BarMedia Category Bar
010COV.book  Page 32  Tuesday, January 20, 2009  5:15 PM
 
						

							33 GB
C:\Documents and Settings\Dolors\Mis documentos\€9\EX2L_CORREC 
PARAL\11_UK_EX2L\MEN.fmmasterpage:Left
KDL-52/46/40/37/32V5500
x-xxx-xxx-xx(x)
Using Menu Functions
TV Settings Menu
You can update the TV system using USB memory. Obtain information from the website below.
http://support.sony-europe.com/TV/ 
Displays the instruction manual on the screen (except for KDL-52V55/56xx, 46V55/56xx, 40V55/
56xx, 37V55/56xx, 32V55/56xx).
~
• The illustration of the Remote commander on the screen instruction manual may vary for KDL-46/40/37/
32W5720/5730/5740.
Introduces how to enjoy the TV (except for KDL-52V55/56xx, 46V55/56xx, 40V55/56xx, 37V55/
56xx, 32V55/56xx).
System Update
Instruction Manual
BRAVIA Tips
Clock/Timers
Sleep TimerSets the TV to automatically switch to standby mode after a certain amount of 
time.
When “Sleep Timer” is activated, the   (Timer) indicator on the TV front panel 
lights up in orange.
z
• When you turn off the TV and turn it on again, “Sleep Timer” is reset to “Off”.
On TimerSets the TV to automatically turn on from standby mode.
Auto Clock UpdateSwitches to digital mode and obtains the time.
Eco
ResetResets all the “Eco” settings to the factory settings.
Power SavingReduces power consumption of the TV by adjusting the backlight.
When you select “Picture Off”, the picture is switched off, and the   Picture Off 
indicator on the TV front panel lights up in green. The sound remains unchanged.
Presence Sensor 
(KDL-46WE5/40WE5xx 
only)When no presence is detected in front of TV, the TV switches to picture off mode 
automatically. Additionally, when no presence is detected after 10 minutes in 
picture off mode, the TV switches to standby mode. In this mode, power 
consumption is reduced by about 70 %.
Idle TV StandbyTurns the TV off after it has been kept idle for the preset length of time.
PC Power 
ManagementSwitches the TV to standby mode when the TV receives no signal from the PC 
input source for 30 seconds.
(Continued)
010COV.book  Page 33  Tuesday, January 20, 2009  5:15 PM
 
						

							C:\Documents and Settings\Dolors\Mis documentos\€9\EX2L_CORREC 
PARAL\11_UK_EX2L\MEN.fmmasterpage:Left
34 GB
KDL-52/46/40/37/32V5500
x-xxx-xxx-xx(x) Light SensorAutomatically optimises the picture settings according to the ambient light in the 
room.
~
• Do not put anything over the sensor, doing so may affect its function. Check the 
position of the sensor (page 14).
Picture
Target InputsAllows you to select whether to use the common settings or to make custom 
settings for the input you are currently viewing.
CommonApplies common settings to all inputs in which “Target 
Inputs” is set to “Common”.
Name of current 
input (e.g. AV1)Allows you to make custom settings for the input.
Picture ModeSets a picture mode. The options that can be selected differ depending on the scene 
select settings.
VividEnhances picture contrast and sharpness.
StandardFor standard pictures. Recommended for home 
entertainment.
CustomAllows you to store your preferred settings.
CinemaFor viewing film-based content. Most suitable when viewing 
the TV in a theatre-like environment.
Photo-VividFor viewing photographs. Enhances picture contrast and 
sharpness.
Photo-StandardFor viewing photographs. Provides the optimum picture 
quality for viewing in the home.
Photo-OriginalFor viewing photographs. Represents the picture quality used 
when imaging developed photographs.
Photo-CustomFor viewing photographs. Allows you to store your preferred 
settings.
SportsProvides the optimum picture quality for viewing sports.
GameMost suitable for when playing games on your TV.
GraphicsProvides the optimum picture quality for viewing graphics.
ResetResets all the “Picture” settings to the factory settings excluding “Target Inputs”, 
“Picture Mode” and “Advanced Settings”.
BacklightAdjusts the brightness of the backlight.
ContrastIncreases or decreases picture contrast.
BrightnessBrightens or darkens the picture.
ColourIncreases or decreases colour intensity.
HueIncreases or decreases the green tones and red tones.
~
• “Hue” can be adjusted only for the NTSC colour signal (e.g. U.S.A. video tapes).
010COV.book  Page 34  Tuesday, January 20, 2009  5:15 PM
 
						

							35 GB
C:\Documents and Settings\Dolors\Mis documentos\€9\EX2L_CORREC 
PARAL\11_UK_EX2L\MEN.fmmasterpage:Left
KDL-52/46/40/37/32V5500
x-xxx-xxx-xx(x)
Using Menu Functions
Colour TemperatureAdjusts the whiteness of the picture.
CoolGives white colours a blue tint.
NeutralGives white colours a neutral tint.
Warm 1/Warm 2Gives white colours a red tint. “Warm 2” gives a redder tint 
than “Warm 1”.
z
• “Warm 1” and “Warm 2” are not available when “Picture Mode” is set to “Vivid” 
(or “Photo-Vivid”).
SharpnessSharpens or softens the picture.
Noise ReductionReduces the noise level of pictures (snowy pictures).
MPEG Noise 
ReductionReduces picture noise in MPEG-compressed videos. This is effective when 
viewing a DVD or digital broadcast.
Motionflow 
(except for KDL-52V55/
56xx, 46V55/56xx, 
40V55/56xx, 37V55/
56xx, 32V55/56xx)Provides smoother picture movement and reduces picture blur.
HighProvides smoother picture movement such as for film-based 
contents.
StandardProvides smooth picture movement. Use this setting for 
standard use.
OffUse this setting when the “High” or “Standard” settings result 
in noise.
~
• Depending on the video, you may not see the effect visually, even if you have 
changed the setting.
Film ModeProvides improved picture movement when playing DVD or VCR images taken on 
film, reducing picture blur and graininess.
Auto 1Provides smoother picture movement than the original film-
based content. Use this setting for standard use.
Auto 2Provides the original film-based content as is.
Off
~
• If the image contains irregular signals or too much noise, “Film Mode” is 
automatically turned off even if “Auto 1” or “Auto 2” is selected.
Advanced SettingsAllows you to set “Picture” settings in more detail. These settings are not available 
when “Picture Mode” is set to “Vivid” (or “Photo-Vivid”).
ResetResets all the advanced settings to the factory settings.
Black CorrectorEnhances black areas of the picture for stronger contrast.
Adv. Contrast 
EnhancerAutomatically adjusts “Backlight” and “Contrast” to the most 
suitable settings judging from the brightness of the screen. 
This setting is especially effective for dark images scenes, 
and will increase the contrast distinction of the darker picture 
scenes.
GammaAdjusts the balance between bright and dark areas of the 
picture.
Auto Light 
LimiterReduces glare such as in scenes where the entire screen is 
white.
Clear WhiteEmphasises white colours.
Live ColourMakes colours more vivid.
White BalanceAdjusts the temperature of each colour.
010COV.book  Page 35  Tuesday, January 20, 2009  5:15 PM
 
						

							C:\Documents and Settings\Dolors\Mis documentos\€9\EX2L_CORREC 
PARAL\11_UK_EX2L\MEN.fmmasterpage:Left
36 GB
KDL-52/46/40/37/32V5500
x-xxx-xxx-xx(x)
Sound
Target InputsAllows you to select whether to use the common settings or to make custom 
settings for the input you are currently viewing.
CommonApplies common settings to all inputs in which “Target 
Inputs” is set to “Common”.
Name of current 
input (e.g. AV1)Allows you to make custom settings for the input.
Sound ModeSets a sound mode. “Sound Mode” includes options best suited for video and 
photographs, respectively. The options that can be selected differ depending on the 
scene select settings.
DynamicEnhances the treble and bass sounds.
StandardFor standard sounds. Recommended for home entertainment.
Clear VoiceMakes voice sound clearer.
ResetResets all the “Sound” settings to the factory settings excluding “Target Inputs”, 
“Sound Mode” and “Dual Sound”.
TrebleAdjusts higher-pitched sounds.
BassAdjusts lower-pitched sounds.
BalanceEmphasises the left or right speaker.
Auto VolumeKeeps volume level constant across all programmes and adverts (e.g. adverts tend 
to be louder than programmes).
Volume OffsetAdjusts the volume level of the current input relative to other inputs, when “Target 
Inputs” is set to the current input name (e.g. AV1).
SurroundAllows you to select the suitable surround effects depending on the genre of TV 
programme (movie, sport, music, etc.) or video game.
The options that can be selected differ depending on the “Scene Select” settings.
S-FORCE Front 
SurroundDelivers surround effects that help you enjoy the virtual 
multi-ch surround audio with just the two internal TV 
speakers.
CinemaDelivers surround effects just like the high-grade audio 
systems found in movie theatres.
MusicDelivers surround effects that make you feel like you are 
surrounded by sound as in a music hall.
SportsDelivers surround effects that make you feel like you are 
watching a live sports contest.
GameDelivers surround effects that enhance game sound.
OffConverts and reproduces multi-ch audio to 2ch audio. In the 
case of other audio formats, the original audio is reproduced.
Voice ZoomAdjusts the sound level of human voices. For example, if the voice of a news 
announcer is indistinct, you can turn up this setting to make the voice louder. 
Conversely, if you are watching a sports programme, you can turn down this 
setting to soften the voice of the commentator.
Sound EnhancerEnhances high-frequency sounds.
Sound BoosterProduces a fuller sound for more impact, by emphasizing the treble and bass 
sounds.
010COV.book  Page 36  Tuesday, January 20, 2009  5:15 PM
 
						

							37 GB
C:\Documents and Settings\Dolors\Mis documentos\€9\EX2L_CORREC 
PARAL\11_UK_EX2L\MEN.fmmasterpage:Left
KDL-52/46/40/37/32V5500
x-xxx-xxx-xx(x)
Using Menu Functions
Dual SoundSets the sound from the speaker for a stereo or bilingual broadcast.
Stereo/MonoFor stereo broadcasts.
A/B/MonoFor bilingual broadcasts, select “A” for sound channel 1, “B” 
for sound channel 2, or “Mono” for mono channel, if 
available.
~
• For other equipment connected to the TV, set “Dual Sound” to “Stereo”, “A”, or 
“B”.
Screen (for inputs other than a PC)
Target InputsAllows you to select whether to use the common settings or to make custom 
settings for the input you are currently viewing.
CommonApplies common settings to all inputs in which “Target 
Inputs” is set to “Common”.
Name of current 
input (e.g. AV1)Allows you to make custom settings for the input.
Screen FormatSee “To change the Screen Format manually” (page 16).
Auto FormatAutomatically changes “Screen Format” to match the broadcast signal. If you want 
to use the setting that you specified in “Screen Format”, select “Off”.
4:3 DefaultSets the default screen format for 4:3 broadcasts.
SmartDisplays conventional 4:3 broadcasts with an imitation wide 
screen effect.
4:3Displays conventional 4:3 broadcasts in the correct 
proportion.
OffUses the setting that you specified in “Screen Format”.
Display AreaAdjusts the picture display area.
AutoAutomatically switches to the most appropriate display area.
Full PixelDisplays pictures in their original size when parts of the 
picture are cut off.
+1Displays pictures in their original size.
NormalDisplays pictures in their recommended size.
-1/-2Enlarges the picture so that the edges are outside the visible 
display area.
Horizontal ShiftAdjusts the horizontal position of the picture.
Vertical ShiftAdjusts the vertical position of the picture when “Screen Format” is set to “Smart”, 
“Zoom” or “14:9”.
Vertical SizeAdjusts the vertical size of the picture when “Screen Format” is set to “Smart”.
010COV.book  Page 37  Tuesday, January 20, 2009  5:15 PM
 
						

							C:\Documents and Settings\Dolors\Mis documentos\€9\EX2L_CORREC 
PARAL\11_UK_EX2L\MEN.fmmasterpage:Left
38 GB
KDL-52/46/40/37/32V5500
x-xxx-xxx-xx(x)
Screen (for PC input)
Auto AdjustmentAutomatically adjusts the display position, phase, and pitch of the picture when the 
TV receives an input signal from the connected PC.
z
• “Auto Adjustment” may not work well with certain input signals. In such cases, 
manually adjust “Phase”, “Pitch”, “Horizontal Shift”, and “Vertical Shift”.
ResetResets all PC screen settings to factory settings.
PhaseAdjusts the phase when the screen flickers.
PitchAdjusts the pitch when the picture has unwanted vertical stripes.
Horizontal ShiftAdjusts the horizontal position of the picture.
Vertical ShiftAdjusts the vertical position of the picture.
Screen FormatSets “Screen Format” for displaying pictures from your PC.
NormalDisplays the picture in its original size.
Full 1Enlarges the picture to fill the vertical display area, while 
maintaining its original proportion.
Full 2Enlarges the picture to fill the display area.
Video Settings
Colour SystemSets the colour system (“Auto”, “PAL”, “SECAM”, “NTSC3.58”, or 
“NTSC4.43”) according to the input signal from the input source.
Audio Settings
Speaker TV SpeakerTurns on and outputs the TV’s sound from the TV speakers.
Audio SystemTurns off the TV speakers and outputs the TV’s sound from 
external audio equipment connected to the audio output 
sockets/jacks on the TV.
Audio Out VariableWhen using an external audio system, volume output from 
audio out can be controlled using the TV’s remote.
FixedThe audio output of the TV is fixed. Use your audio 
receiver’s volume control to adjust the volume (and other 
audio settings) through your audio system.
Headphone Settingsi Speaker LinkSwitches the TV’s internal speakers on/off when you connect 
headphones to the TV.
i VolumeAdjusts the volume of the headphones when “i Speaker 
Link” is set to “Off”.
i Dual SoundSets the sound from the headphones for a bilingual broadcast.
Optical OutSets the audio signal that is output from the DIGITAL AUDIO OUT (OPTICAL) 
jack of the TV. Set to “Auto”, when connecting equipment compatible with Dolby 
Digital. Set to “PCM”, when connecting equipment not compatible with Dolby 
Digital.
010COV.book  Page 38  Tuesday, January 20, 2009  5:15 PM
 
						

							39 GB
C:\Documents and Settings\Dolors\Mis documentos\€9\EX2L_CORREC 
PARAL\11_UK_EX2L\MEN.fmmasterpage:Left
KDL-52/46/40/37/32V5500
x-xxx-xxx-xx(x)
Using Menu Functions
Set-up
USB Auto StartAutomatically starts photo playback when the TV is turned on and a digital still 
camera or other device storing photo files is connected to the USB port then turned 
on.
~
• Playback does not start automatically if the TV is turned on after connecting the 
digital still camera or other device to the USB port.
Quick StartThe TV turns on faster than usual by turning on the power using the remote. 
However, power consumption in standby mode is approximately 20 watts higher 
than usual. Up to 3 out of 5 time zones can be set.
AV PresetAssigns an icon or name to equipment connected to the side and rear sockets/jacks. 
The icon and name appear briefly on the screen when you select the equipment. 
1Press F/f to select the desired input source, then press  .
Skip AV InputsFor each input, sets whether or not to display on the Home 
Menu or in a list of inputs that will appear when you press 
.
Auto
Displays the icon and name only when the equipment is 
connected (except for AV1 or AV2 inputs).
Always Display
Always displays the icon and name regardless of whether or 
not the equipment is connected.
Skip
Does not display the icon and name even if the equipment is 
connected.
2Press g to assign an icon and name.
Label AV InputsUses preset labels to assign a name to connected equipment.
Allows you to create your own label when you select “Edit”.
Edit
Allows you to edit the name in the edit screen and choose the 
appropriate icon.
AV2 InputSets a signal to be input through the socket labelled  / / AV2 on the rear 
of the TV.
AutoSwitches automatically among the signals of RGB input, S 
video input, Composite video input depending on the input 
signal.
RGBInputs the RGB signal.
S VideoInputs the S Video signal.
CompositeInputs the Composite video signal.
AV2 OutputSets a signal to be output to the / / AV2 socket. If you connect a VCR 
or other recording equipment to the  / / AV2 socket, you can record the 
output signal from other equipment connected to the TV.
TVOutputs TV broadcasts.
AV1Outputs signals from equipment connected to the  /
AV1 socket.
AV3Outputs signals from equipment connected to the  AV3 
socket.
AutoOutputs whatever is being viewed on the screen (except 
signals from the  / COMPONENT IN, HDMI IN1, 2, 3, 
or 4, and PC IN  /  sockets).
(Continued)
010COV.book  Page 39  Tuesday, January 20, 2009  5:15 PM
 
						

							C:\Documents and Settings\Dolors\Mis documentos\€9\EX2L_CORREC 
PARAL\11_UK_EX2L\MEN.fmmasterpage:Left
40 GB
KDL-52/46/40/37/32V5500
x-xxx-xxx-xx(x) HDMI Set-upAllows the TV to communicate with equipment that is compatible with the Control 
for HDMI function, and connected to the HDMI sockets/jacks of the TV. Note that 
communication settings must also be made on the connected equipment.
Control for HDMISets whether or not to link the operations of the TV and the 
connected equipment that is compatible with Control for 
HDMI. When set to “On”, the following functions are 
available.
If the specific Sony equipment that is compatible with 
Control for HDMI is connected, this setting is applied to the 
connected equipment automatically when the “Control for 
HDMI” is set to “On” using the TV.
Auto Devices OffWhen this is set to “On”, the connected equipment that is 
compatible with Control for HDMI turns off when you turn 
off the TV.
Auto TV OnWhen this is set to “On”, the TV turns on when you turn on 
the connected equipment that is compatible with Control for 
HDMI.
Tuner Box 
ControlIf set to “Advanced”, you can select a channel tuned by 
connected equipment using the TV’s remote.
HDMI Device ListDisplays a list of connected equipment that is compatible 
with Control for HDMI.
~
• You cannot use “Control for HDMI” if the TV operations are linked to the 
operations of an audio system that is compatible with Control for HDMI.
Auto Start-upYou can run the initial Set-up that appeared when you first connected the TV, and 
select the language and country/area, or tune in all available channels again.
Even if you have made the settings when you first connected the TV, you may 
need to change the settings after moving house, or to search for newly launched 
channels.
LanguageSets the language displayed on the menu screens.
Product InformationDisplays product information of the TV.
Factory SettingsResets all settings to factory settings and displays the initial Set-up screen.
~
• Settings for the Favourite lists, country/area, and language will also be reset to 
factory settings.
Analogue Set-up
Programme List 
DisplaySelect “Off” to hide the list of analogue channels from the XMB™ 
(XrossMediaBar).
1 Digit DirectWhen “1 Digit Direct” is set to “On”, you can select an analogue channel using one 
preset number button (0 – 9) on the remote.
~
• When “1 Digit Direct” is set to “On”, you cannot select channel numbers 10 and 
above by entering two digits on the remote.
Favourite Set-upAdds channels in a Favourite list.
Auto TuningTunes in all the available analogue channels.
You can retune the TV after moving house, or to search for newly launched 
channels. 
010COV.book  Page 40  Tuesday, January 20, 2009  5:15 PM