Sony Kdl 32v4000 Operating Instructions

							
© 2008 Sony Corporation3-876-435-14(1)
KDL-46V4000
KDL-40V4000
KDL-32V4000
Operating Instructions 
LCD Digital Colour TV
 
						

							
2 GB
IntroductionThank you for choosing this Sony product. 
Before operating the TV, please read this 
manual thoroughly and retain it for future 
reference.
Trademark information
 is a registered trademark of the DVB 
Project
Manufactured under license from Dolby 
Laboratories. “Dolby” and the double-D 
symbol are trademarks of Dolby 
Laboratories.
HDMI, the HDMI logo and High-
Definition Multimedia Interface are 
trademarks or registered trademarks of 
HDMI Licensing LLC.
“BRAVIA” and   are 
trademarks of Sony Corporation.
Notes for New Zealand 
model
Your BRAVIA TV is ENERGY 
STAR qualified in the Home mode. 
 When the TV is initially set up, it is 
designed to meet ENERGY STAR 
requirements. 
 Changes to certain features, settings,  and functionalities of this TV (i.e. TV 
Guide, Picture/Sound, Light Sensor, 
Power Savings) can slightly change the 
power consumption. Depending upon 
such changed settings, the power 
consumption may increase which 
possibly could exceed the limits 
required for ENERGY STAR 
qualification.
 
						

							
3 GB
Table of Contents
Start-up Guide  4
Safety Information ............................................................................................................................ 9
Precautions .................................................................................................................... ................. 10
Remote Control and TV Controls/Indicators ................................................................................ 11
Watching TV
Watching TV .................................................................................................................... ................ 15
Using the Digital Electronic Programme Guide (EPG)   (Australian model only)  .............. 17
Using the Digital Favourite List   ............................................................................................ 18
Using Optional Equipment
Connecting Optional Equipment .................................................................................................. .19
Viewing Pictures from Connected Equipment ............................................................................. 22
Using USB Photo Viewer......................................................................................................... ....... 23
Using BRAVIA Sync (Control for HDMI)........................................................................................ 24
Using MENU Functions
Navigating through TV Home Menu on XMB™ ............................................................................ 25
TV Settings Menu ............................................................................................................... ............. 26
Additional Information
Specifications .................................................................................................................................. 36
Troubleshooting ................................................................................................................ .............. 38
 
: for digital channels only
Before operating the TV, please read “Safety Informatio n” (page 9). Retain this manual for future reference.
 
						

							
4 GB
Start-up Guide
1: Checking the accessories
AC power cord (1) (KDL-46V4000/40V4000)
Stand (1) and screws (4) (KDL-46V4000/40V4000)
Stand (1) and screws (3) (KDL-32V4000)
Remote RM-GD004 (1) (Australian model)
Remote RM-GD006 (1) (New Zealand model)
Size AA batteries (R6 type) (2)
To insert batteries into the remote
~
 Observe the correct polarity when inserting batteries.
 Do not use different types of batteries together or  mix old and new batteries.
 Dispose of batteries in an environmentally 
friendly way. Certain regions may regulate the 
disposal of batteries. Please consult your local 
authority.
 Handle the remote with care. Do not drop or step  on it, or spill liquid of any kind onto it.
 Do not place the remote in a location near a heat 
source, a place subject to direct sunlight, or a 
damp room.
2: Attaching the stand
1Place the TV onto the stand by aligning 
the 
screw hole alignment lines over the stand 
as shown.
2Fix the TV to the stand according to the 
arrow marks   that guide the screw holes 
using the supplied screws.
~
 This TV is very heavy, so two or more people  should place the TV on the stand.
 If using an electric screwdriver, set the tightening  torque at approximately 1.5N·m (15kgf·cm).
 When installing the TV onto the wall, follow step 
1 to prevent the TV panel from falling over.
Push and lift the cover to open.
KDL-46V4000/40V4000
KDL-32V4000
 
						

							
5 GB
Start-up Guide
3: Connecting an antenna/
VCR
Connecting an antenna
Connecting an antenna and VCR
~
 When connecting an antenna cable (not supplied), an adaptor (not supplied) may be required.
4: Preventing the TV from 
toppling over
1Install a wood screw (4 mm in diameter, 
not supplied) in the TV stand.
2Install a machine screw (M6 × 12, not 
supplied) into the screw hole of the TV.
3Tie the wood screw and the machine 
screw with a strong cord (not supplied).
Antenna cable 
(not supplied)
Antenna cable 
(not supplied) Antenna 
cable (not 
supplied)
S-Video 
cable (not 
supplied)
AV cable 
(not 
supplied)
VCR 
 
						

							
6 GB
5: Bundling the cables6: Performing the initial 
set-up
KDL-46V4000/
40V4000KDL-32V4000
3
(Australian model only)
4
Select “Home” (Home mode) for the best 
TV settings to use the TV in the home.
~
 For New Zealand model, the illustration may 
differ from that of the actual display.
5
Select “Yes” to enable the system update 
(page 35).
 
						

							
7 GB
Start-up Guide
Adjusting the viewing angle 
of the TV
This TV can be adjusted within the angles 
shown below.
Adjust the angle left and right (swivel)
6
Make sure that the antenna is connected.
The TV starts searching for all available 
digital channels, followed by all available 
analogue channels. This may take some 
time, so do not press any buttons on the 
TV or remote while proceeding.
7
If you want to change the order of 
analogue channels, follow the steps in 
“Programme Sorting” on page 32.
If your TV cannot receive digital 
broadcasts, the “Clock Set” menu appears 
on the screen (page 29).
8
When using the control for HDMI 
function, select “Yes” to enable control for 
compatible HDMI devices.
9
Select “Yes” to display this menu again 
next time, otherwise select “No”.
Top viewFront
 
						

							
8 GB
Detaching the Table-Top 
Stand from the TV
~
 Remove the screws guided by the arrow marks   of the TV.
 Do not remove the Table-Top Stand for any reason 
other than to wall-mount the TV.
KDL-46V4000/40V4000
KDL-32V4000
 
						

							
9 GB
Safety 
Information
Installation/Set-upInstall and use the TV set in accordance with the instructions below 
in order to avoid any risk of fire, electrical shock or damage and/or 
injuries.
Installations The TV set should be installed near an easily accessible AC 
power outlet.
s Place the TV set on a stable, level surface to avoid it from 
falling down and cause personal in jury or damage to the TV.
s Only qualified service pers onnel should carry out wall 
installations.
s For safety reasons, it is strongly recommended that you use 
Sony accessories, including:
– Wall-mount bracket SU-WL500
– Wall-mount bracket SU-WL50B
– TV stand SU-FL300M
s Be sure to use the screws supplied with the Wall-mount bracket 
when attaching the mounting hooks to the TV set. The supplied 
screws are designed so that they are 8 mm to 12 mm in length 
when measured from the attaching surface of the mounting 
hook. 
The diameter and length of the screws differ depending on the 
Wall-mount bracket model. 
Use of screws other than those supplied may result in internal 
damage to the TV set or cause it to fall, etc.
TransportingsBefore transporting the TV set, 
disconnect all cables.
s Two or more people are 
needed to transport a large TV 
set.
s When transporting the TV set 
by hand, hold it as shown on 
the right. Do not put stress on 
the LCD panel.
s When lifting or moving the TV 
set, hold it firmly from the 
bottom.
s When transporting the TV set, 
do not subject it to jolts or 
excessive vibration.
s When transporting the TV set 
for repairs or when moving, 
pack it using the original 
carton and packing material.
VentilationsNever cover the ventilation holes or insert anything in the 
cabinet.
s Leave space around the TV set as shown below.
s It is strongly recommended that you use a Sony wall-mount 
bracket in order to provide adequate air-circulation.
Installed on the wall
Installed with stand
sTo ensure proper ventilation and prevent the collection of dirt 
or dust:
– Do not lay the TV set flat, install upside down, backwards, 
or sideways.
– Do not place the TV set on a shelf, rug, bed or in a closet.
– Do not cover the TV set with a cloth, such as curtains, or  items such as newspapers, etc.
– Do not install the TV set as shown below.
AC power cordHandle the AC power cord and outlet as follows in order to avoid 
any risk of fire, electrical shock or damage and/or injuries:
– Use only Sony supplied AC power cords, not those of other  brands.
– Insert the plug fully into the AC power outlet.
– Operate the TV set on a 220–240 V AC supply only.
– When wiring cables, be sure to unplug the AC power cord for  your safety and take care not to catch your feet on the cables.
– Disconnect the AC power cord from the AC power outlet before  working on or moving the TV set.
– Keep the AC power cord away from heat sources.
– Unplug the AC power plug and clean it regularly. If the plug is  covered with dust and it picks  up moisture, its insulation may 
deteriorate, which could result in a fire. 
Mounting Hook
Hook attachment on rear of TV set
Screw (supplied with the Wall-mount 
bracket)
8 mm - 12 mm
Be sure to hold the bottom of 
the panel, not the front part.
Do not handle with dent area.
Do not handle with the 
transparent bottom part.
30 cm
10 cm 10 cm
10 cm
Leave at least this space around the set.
30 cm
10 cm 10 cm 6 cm
Leave at least this space around the set.
Air circulation is blocked.
Wall Wall
(Continued)
 
						

							
10 GB
NotessDo not use the supplied AC power cord on any other equipment.
s Do not pinch, bend, or twist the AC power cord excessively. 
The core conductors may be exposed or broken.
s Do not modify the AC power cord.
s Do not put anything heavy on the AC power cord.
s Do not pull on the AC power cord itself when disconnecting the 
AC power cord.
s Do not connect too many appliances to the same AC power 
outlet.
s Do not use a poor fitting AC power outlet.
Prohibited UsageDo not install/use the TV set in locations, environments or 
situations such as those listed below, or the TV set may malfunction 
and cause a fire, electrical shock, damage and/or injuries.
Location:Outdoors (in direct sunlight), at  the seashore, on a ship or other 
vessel, inside a vehicle, in medical institutions, unstable locations, 
near water, rain, moisture or smoke.
Environment:Places that are hot, humid, or excessively dusty; where insects may 
enter; where it might be exposed to mechanical vibration, near 
flammable objects (candles, etc). Th e TV shall not be exposed to 
dripping or splashing and no objects filled with liquids, such as 
vases, shall be placed on the TV.
Situation:Do not use when your hands are wet, with the cabinet removed, or 
with attachments not recommended by the manufacturer. 
Disconnect the TV set from AC power outlet and antenna during 
lightning storms.
Broken pieces:s Do not throw anything at the TV set. The screen glass may 
break by the impact and cause serious injury.
s If the surface of the TV set cracks, do not touch it until you have 
unplugged the AC power cord. Otherwise electric shock may 
result.
When not in use
sIf you will not be using the TV set for several days, the TV set 
should be disconnected from the AC power for environmental 
and safety reasons. 
s As the TV set is not disconnected from the AC power when the 
TV set is just turned off, pull the plug from the AC power outlet 
to disconnect the TV set completely.
s However, some TV sets may have features that require the TV 
set to be left in standby to work correctly.
For children
sDo not allow children to climb on the TV set.
s Keep small accessories out of the reach of children, so that they 
are not mistakenly swallowed. 
If the following problems occur...
Turn off  the TV set and unplug the AC power cord immediately if 
any of the following problems occur.
Ask your dealer or Sony service centre to have it checked by 
qualified service personnel.
When:– AC power cord is damaged.
– Poor fitting of AC power outlet.
– TV set is damaged by being dropped, hit or having something 
thrown at it.
– Any liquid or solid object falls through openings in the cabinet.
Precautions
Viewing the TVs View the TV in moderate light, as viewing the TV in poor light 
or during long period of time, strains your eyes.
s When using headphones, adjust the volume so as to avoid 
excessive levels, as h earing damage may result.
LCD ScreensAlthough the LCD screen is made with high-precision 
technology and 99.99% or more of the pixels are effective, 
black dots may appear or bright  points of light (red, blue, or 
green) may appear constantly on the LCD screen. This is a 
structural property of the LCD screen and is not a malfunction.
s Do not push or scratch the front filter, or place objects on top of 
this TV set. The image may be  uneven or the LCD screen may 
be damaged.
s If this TV set is used in a cold place, a smear may occur in the 
picture or the picture may beco me dark. This does not indicate 
a failure. These phenomena disappear as the temperature rises.
s Ghosting may occur when still pictures are displayed 
continuously. It may disappear after a few moments.
s The screen and cabinet get warm when this TV set is in use. 
This is not a malfunction.
s The LCD screen contains a small amount of liquid crystal. 
Mercury is sometimes contained depending on the kind of 
fluorescent tubes. Follow your local ordinances and regulations 
for disposal.
Handling and cleaning the screen surface/
cabinet of the TV set
Be sure to unplug the AC power cord connected to the TV set from 
AC power outlet before cleaning.
To avoid material degradation or screen coating degradation, 
observe the following precautions.
sTo remove dust from the screen surface/cabinet, wipe gently 
with a soft cloth. If dust is persistent, wipe with a soft cloth 
slightly moistened with a diluted mild detergent solution.
s Never use any type of abrasive  pad, alkaline/acid cleaner, 
scouring powder, or volatile solvent, such as alcohol, benzene, 
thinner or insecticide. Using such materials or maintaining 
prolonged contact with rubber or  vinyl materials may result in 
damage to the screen surface and cabinet material.
s When adjusting the angle of the TV set, move it slowly so as to 
prevent the TV set from moving or slipping off from its table 
stand.
Optional EquipmentKeep optional components or any equipment emitting 
electromagnetic radiation away from the TV set. Otherwise picture 
distortion and/or noisy sound may occur.
Disposal of Old Electrical & Electronic 
Equipment (Applicable in the European 
Union and other European countries 
with separate collection systems)
This symbol is on the remote control.