Sony Kdl 32d3000 Operating Instructions

31 GB
Using MENU Functions
Analogue Set-up menu
You can select the options listed below on the 
“Analogue Set-up” menu. To select options in 
“Settings”, refer to “Navigating through menus” 
(page 20).
1 Digit DirectWhen “1 Digit Direct” is set to “On”, you can select an analogue channel using one 
preset number button (0 - 9) on the remote.
~When “1 Digit Direct” is set to “On”, you cannot select channel numbers 10 and above entering 
two digits using the remote.
Auto TuningTunes in all the available...

32 GB
Manual Programme 
PresetBefore selecting “Label”/“AFT”/“Audio Filter”/“Skip”/“Decoder”, press PROG +/- 
to select the programme number with the channel. You cannot select a programme 
number that is set to “Skip” (page 33).
Programme/System/Channel
Presets programme channels manually.
1Press 
F/f to select “Programme”, then press  .
2Press 
F/f to select the programme number you want to manually tune (if 
tuning a VCR, select channel 00), then press RETURN.
3Press 
F/f to select “System”, then...

33 GB
Using MENU Functions
Skip
Skips unused analogue channels when you press PROG +/- to select channels. (You 
can still select a skipped channel using the number buttons.)
Decoder
Shows and records the scrambled channel selected when using a decoder connected 
directly to scart connector  / 1, or to scart connector  / 2 via a VCR.
~This option is not available when “United Kingdom” is selected for “Country” (page 6).
Confirm
Saves changes made to the “Manual Programme Preset” settings.
 

34 GB
Digital Set-up menu 
You can select the options listed below on the “Digital 
Set-up” menu. To select options in “Settings”, refer to 
“Navigating through menus” (page 20).
~Some functions may not be available in some countries/
regions.
Digital TuningDigital Auto Tuning
Tunes in the available digital channels.
This option allows you to retune the TV after moving house, or to search for new 
channels that have been launched by broadcasters. For details, see “Auto-tuning the 
TV” on page 6....

35 GB
Using MENU Functions
Digital Set-upSubtitle Set-up
“Subtitle Setting”: When “For Hard Of Hearing” is selected, some visual aids may 
also be displayed with the subtitles (if TV channels broadcast such information).
“Subtitle Language”: Selects which language subtitles are displayed in.
Audio Set-up
“Audio Type”: Switches to broadcast for the hearing impaired when “For Hard Of 
Hearing” is selected.
“Audio Language”: Selects the language used for a programme. Some digital 
channels may broadcast...

36 GB
“Auto DST”: Sets whether or not to automatically switch between summer time and 
winter time.
 “Off”: The time is displayed according to the time difference set by “Time Zone”.
 “On”: Automatically switches between summer time and winter time according to the 
calendar.
CA Module Set-up
Allows you to access a pay TV service once you obtain a Conditional Access Module 
(CAM) and a view card. See page 16 for the location of the   (PCMCIA) socket.
 

37 GB
Additional Information
Specifications
* Specified standby power is reached after the TV finishes necessary internal processes.
Design and specifications are subject to change without notice.
Additional Information
Model nameKDL-32D3000/32D3010KDL-40D3000/40D3010KDL-46D3000/46D3010
System
Panel System
LCD (Liquid Crystal Display) Panel
TV SystemAnalogue: Depending on your country/region selection: B/G/H, D/K, L, I
Digital: DVB-T/DVB-C
Colour/Video SystemAnalogue: PAL, SECAM, NTSC 3.58, 4.43 (only...

38 GB
PC Input Signal Reference Chart
 This TV’s PC input does not support Sync on Green or Composite Sync.
 This TV’s PC input does not support interlaced signals.
 For the best picture quality, it is recommended to use the signals (boldfaced) in the above chart with a 60 Hz vertical frequency 
from a personal computer. In plug and play, signals with a 60 Hz vertical frequency will be selected automatically.
Signals Horizontal (Pixel) Vertical (Line)Horizontal 
frequency 
(kHz)Ver t i ca l  
frequency...

39 GB
Additional Information
Troubleshooting
Check whether the 1 (standby) indicator is 
flashing in red.
When it is flashing
The self-diagnosis function is activated. 
1Count how many 1 (standby) indicator 
flashes between each two second break.
For example, the indicator flashes three times, then 
there is a two second break, followed by another 
three flashes, etc.
2Press 1 on the top edge of the TV to turn it 
off, disconnect the mains lead, and inform 
your dealer or Sony service centre of how 
the...

Printed in Spain3-096-727-11(4)
KDL-46D3000/46D3010
KDL-40D3000/40D3010
KDL-32D3000/32D3010
U