Sony Kdl 32cx523 Operating Instructions

							21GB
Network Setup
Setting up the Internet 
connection
Using the network feature you can connect the 
TV to the Internet. The set-up procedure 
differs depending on the type of network and 
LAN router. Before setting up the Internet 
connection, be sure to set up a LAN router. 
Check your wireless LAN environment using 
the following chart.
Wireless LAN
Wired LAN
 , Type 4
* Type 1 is easier to set up if your router has an 
automatic setting button, e.g. Air Station One-
Touch Secure System (AOSS). Most of the latest 
routers have this function. Check your router.
Type 1: Follow the configuration for “Secured 
Network with Wi-Fi Protected Set-up (WPS)”.
Type 2: Follow the configuration for “Secured 
Network without Wi-Fi Protected Set-up 
(WPS)”.
Type 3: Follow the configuration for 
“Unsecured Network with Any Type of 
Wireless LAN Router”.
Type 4: Follow the configuration for “Wired 
network set-up”.
Type 1: Secured network with 
Wi-Fi Protected Set-up (WPS)
The WPS standard makes security of a wireless 
home network as straightforward as pressing 
the WPS button on the wireless LAN router. 
Before setting up a wireless LAN, check the 
location of the WPS button on the router and 
verify how to use it.For security purpose, “WPS (PIN)” provides a 
PIN code for your router. PIN code is renewed 
every time you select “WPS (PIN)”.
1Press HOME, then select   > 
“Network” > “Network Set-up”.
2Select “Wireless Set-up”.
3Select “WPS (Push Button)” for Push 
Button method or “WPS (PIN)” for 
PIN method.
~
Button name of the WPS may differ 
depending on the router (e.g. AOSS button).
4Follow the instructions on the set-up 
screen.
Type 2: Secured network 
without Wi-Fi Protected Set-up 
(WPS)
To set up a wireless LAN, SSID (wireless 
network name) and security key (WEP or 
WPA key) will be required. If you do not know 
them, consult the instruction manual of your 
router.
1Press HOME, then select   > 
“Network” > “Network Set-up”.
2Select “Wireless Set-up”.
3Select “Scan”, then select a network 
from the list of scanned wireless 
networks.
4Follow the instructions on the set-up 
screen.
~
If you use WPS for network set-up, the security 
settings of the wireless LAN router activate, and 
any equipment previously connected to the 
wireless LAN in a non-secure status will be 
disconnected from the network.
In this case, activate the security settings of the 
disconnected equipment and then reconnect. Or, 
you can deactivate the security settings of the 
wireless LAN router, and then connect the 
equipment to a TV in a non-secure status.
Secure Wireless LAN? NO
k 
Type 3
YES m
Do you use a wireless LAN 
router compatible with Wi-Fi 
Protected Set-up (WPS)?NO
k 
Type 2
YES m
Type 1*
(Continued)
 
						

							22GB
Type 3: Unsecured network 
with any type of wireless LAN 
router
To set up a wireless LAN, SSID (wireless 
network name) will be required.
1Press HOME, then select   > 
“Network” > “Network Set-up”.
2Select “Wireless Set-up”.
3Select “Scan”, then select a network 
from the list of scanned wireless 
networks.
4Follow the instructions on the set-up 
screen.
~
Security key (WEP or WPA key) will not be 
required because you do not need to select any 
security method in this procedure.
Type 4: Wired network set-up
Enter the respective alphanumeric values for 
your router if necessary. The items that need to 
be set (e.g. IP Address, Subnet Mask, DHCP) 
may differ depending on the Internet service 
provider or router. For details, refer to the 
instruction manuals provided by your Internet 
service provider, or those supplied with the 
router.
1Press HOME, then select   > 
“Network” > “Network Set-up”.
2Select “Wired Set-up”.
3Select “Auto” to set the IP Address and 
proxy server automatically, or 
“Custom” to set them manually.
4Follow the instructions on the set-up 
screen.
Viewing the network status
You can confirm your network status.
1Press HOME, then select   > 
“Network” > “Network Set-up”.
2Select “View Network Status”.
If you cannot connect to the 
Internet
Use the diagnosis to check possible causes for 
network connection failures, and settings.
1Press HOME, then select   > 
“Network” > “Network Set-up”.
2Select “View Network Status”.
3Select “Check Connection”.
This may take several minutes. You 
cannot cancel the diagnosis after 
selecting “Check Connection”.
Adjusting the server display 
settings
You can select home network servers to be 
displayed on the Home Menu. Up to 10 servers 
can be displayed in the Home Menu 
automatically.
1Press HOME, then select   > 
“Network” > “Home Network Setup”.
2Select “Server Display Settings”.
3Select the server you want to display on 
the Home Menu, and adjust the 
settings.
If you cannot connect to your home 
network
The TV detects if the server is being correctly 
recognised when you cannot connect it to your 
home network. If the diagnostic results 
indicate a failure, check possible causes, and 
network connections and settings.
1Press HOME, then select   > 
“Network” > “Home Network Setup”.
2Select “Server Diagnostics”.
The server diagnostic starts. When the 
server diagnostic is complete, the 
diagnostic result list appears.
 
						

							23GB
Additional Information
Troubleshooting
When the 1 (standby) indicator is flashing, count how many times it flashes (interval 
time is three seconds).
Press 1 on the TV to turn it off, disconnect the AC power cord (mains lead), and inform your dealer 
or Sony service centre of how the indicator flashes (number of flashes).
When the 1 (standby) indicator is not flashing, check the items in the tables as 
follows.
Also refer to “Troubleshooting” in the i-Manual. If the problem persists, have your TV serviced by 
qualified service personnel.
Additional Information
ConditionExplanation/Solution
There is no picture (screen 
is dark) and no sound.Check the antenna (aerial)/cable connection.
Connect the TV to the AC power (mains), and press 1 on the TV.
If the 1 (standby) indicator lights up in red, press "/1.
Tiny black points and/or 
bright points appear on the 
screen.The screen is composed of pixels. Tiny black points and/or bright 
points (pixels) on the screen do not indicate a malfunction.
Some programmes cannot 
be tuned.Check the antenna (aerial) or dish.
The TV turns off 
automatically (the TV 
enters standby mode).Check if the “Sleep Timer” is activated, or confirm the 
“Duration” setting of “On Timer”.
Check if the “Idle TV Standby” is activated.
Check if the “Presence Sensor” is activated. When no viewer is 
detected in front of the TV for a preset time, the picture 
automatically turns off, while leaving only the TV sound on. 
Additionally, after 30 minutes in picture off mode, the TV will 
switch to standby mode.
The remote does not 
function.Replace the batteries.
Your TV may be in SYNC mode. 
Press SYNC MENU, select “TV Control” and then select “Home 
(Menu)” or “Options” to control the TV.
The “Parental Lock” 
password has been 
forgotten.Enter 9999 for the PIN code. (PIN code 9999 is always accepted.)
The TV surrounds become 
warm.When the TV is used for an extended period, the TV surrounds 
become warm.
You may feel hot when touching there by the hand.
 
						

							24GB
Specifications
System
Panel system
LCD (Liquid Crystal Display) Panel
TV systemAnalogue: Depending on your country/area selection: B/G/H, D/K, L, I, M
Digital: DVB-T2 (KDL-55EX723/46HX723/46EX724/46EX723/46EX524/40HX723/40EX724/
40EX723/40EX524/40EX523/40CX523/37EX723/37EX524/32EX724/32EX723/32EX524/
32EX523/32EX424/32CX523 only) 
DVB-T/DVB-C
Colour/video systemAnalogue: PAL, PAL60 (only video input), SECAM, NTSC3.58, NTSC4.43 (only video input)
Digital: MPEG-2 MP@ML/HL, H.264/MPEG-4 AVC MP/HP@L4
Channel coverageAnalogue: VHF: E2–E12/UHF: E21–E69/CATV: S1–S20/HYPER: S21–S41
D/K: R1–R12, R21–R69/L: F2–F10, B–Q, F21–F69/I: UHF B21–B69/M: A2-A13, A14-A79
Digital: VHF/UHF
Sound output10 W + 10 W (KDL-55/46/40/37/32EX72x, KDL-46/40HX72x, KDL-46/40/37/32EX52x, KDL-46/40/
32CX52x, KDL-32EX42x) 
8 W + 8 W (KDL-26/24/22EX32x)
Input/Output jacks
Antenna (aerial) cable
75 ohm external terminal for VHF/UHF
/ AV121-pin scart connector (CENELEC standard) including audio/video input, RGB input and TV audio/video 
output.
AV2Video input (phono jack)
/ COMPONENT INSupported formats: 1080p, 1080i, 720p, 576p, 576i, 480p, 480i
Audio input (phono jacks)
HDMI IN1, 2, 3, 4 
(except KDL-26/24/
22EX32x)Video: 1080/24p/30p, 1080p, 1080i, 720/24p/30p, 720p, 576p, 576i, 480p, 480i
Audio: Two channel linear PCM: 32, 44.1 and 48 kHz, 16, 20 and 24 bits, Dolby Digital
Analogue audio input (minijack) (HDMI IN4 only)
PC Input
ARC (Audio Return Channel) (HDMI IN1 only)
HDMI IN1, 2 
(KDL-26/24/22EX32x only)Video: 1080/24p/30p, 1080p, 1080i, 720/24p/30p, 720p, 576p, 576i, 480p, 480i
Audio: Two channel linear PCM: 32, 44.1 and 48 kHz, 16, 20 and 24 bits, Dolby Digital
Analogue audio input (minijack) (HDMI IN2 only)
PC Input
ARC (Audio Return Channel) (HDMI IN1 only)
 DIGITAL AUDIO OUT 
(OPTICAL)Digital optical jack (Two channel linear PCM, Dolby Digital)
 AUDIO OUT / iAudio output (phono jacks)
Headphones jack
PC INPC Input (Mini D-sub 15-pin)
 PC audio input (minijack)
(KDL-26/24/22EX32x only)USB port (support HDD Rec)
1, 2 
(KDL-46/40/32EX520, 
KDL-40/32EX523 only)USB port
1, 2 (HDD REC)
(except KDL-46/40/
32EX520, KDL-40/
32EX523, KDL-26/24/
22EX32x)USB port, USB HDD device port ( 2 only)
CAM (Conditional Access Module) slot
LAN10BASE-T/100BASE-TX connector (Depending on the operating environment of the network, 
connection speed may differ. 10BASE-T/100BASE-TX communication rate and communication quality 
are not guaranteed for this TV.)
 
						

							25GB
Additional Information
Model name KDL-55EX72x46HX72x46EX72x46EX52x
Power and others
Power requirements
220 V – 240 V AC, 50 Hz
Energy Efficiency ClassAAAA
Screen size (measured 
diagonally)Approx. 138.8 cm/
55 inchesApprox. 116.8 cm/
46 inchesApprox. 116.8 cm/
46 inchesApprox. 116.8 cm/
46 inches
Power 
consumptionin “Home”/
“Standard” 
mode113 W 83.0 W 81.0 W 68.0 W
in “Shop”/
“Vivid” mode177 W 153 W 133 W 114 W
Average annual energy 
consumption*1165 kWh 115 kWh 118 kWh 99 kWh
Standby power 
consumption*20.25 W (15 W in 
software / EPG update 
mode)0.25 W (15 W in 
software / EPG update 
mode)0.25 W (15 W in 
software / EPG update 
mode)0.3 W (13 W in 
software / EPG update 
mode)
Display resolution1,920 dots (horizontal) × 1,080 lines (vertical)
Dimensions (Approx.) (w × h × d) 
with Table-Top Stand
126.9 × 79.9 × 31.5 cm 107.8 × 69.0 × 26.0 cm 107.8 × 69.0 × 26.0 cm 107.8 × 69.0 × 26.0 cm
without Table-Top Stand126.9 × 76.9 × 4.1 cm 107.8 × 66.0 × 4.2 cm 107.8 × 66.0 × 4.2 cm 107.8 × 66.0 × 4.2 cm
Mass (Approx.)
with Table-Top Stand
25.4 kg 18.8 kg 17.9 kg 17.8 kg
without Table-Top Stand20.2 kg 14.4 kg 14.3 kg 14.2 kg
Supplied accessoriesSee “Checking the accessories” (page 8).
Optional accessoriesWall-Mount Bracket: SU-WL500
3D Glasses: TDG-BR250/TDG-BR200/TDG-BR100/TDG-BR50 (KDL-55/46EX72x, KDL-46HX72x)
USB Wireless LAN Adapter
Operating temperature0 ºC – 40 ºC
Operating humidity 10 % – 80 % RH (non-condensing)
Model name KDL-46CX52x40HX72x40EX72x40EX52x
Power and others
Power requirements
220 V – 240 V AC, 50 Hz
Energy Efficiency ClassCBAA
Screen size (measured 
diagonally)Approx. 116.8 cm/
46 inchesApprox. 101.6 cm/
40 inchesApprox. 101.6 cm/
40 inchesApprox. 101.6 cm/
40 inches
Power 
consumptionin “Home”/
“Standard” 
mode128 W 85.0 W 64.0 W 65.0 W
in “Shop”/
“Vivid” mode204 W 135 W 121 W 113 W
Average annual energy 
consumption*1187 kWh 118 kWh 93 kWh 95 kWh
Standby power 
consumption*20.25 W (16 W in 
software / EPG update 
mode)0.25 W (14 W in 
software / EPG update 
mode)0.25 W (15 W in 
software / EPG update 
mode)0.3 W (13 W in 
software / EPG update 
mode)
Display resolution1,920 dots (horizontal) × 1,080 lines (vertical)
Dimensions (Approx.) (w × h × d) 
with Table-Top Stand
112.2 × 71.2 × 27.5 cm 94.3 × 61.5 × 21.0 cm 94.3 × 61.6 × 25.0 cm 94.3 × 61.6 × 25.0 cm
without Table-Top Stand112.2 × 68.2 × 7.4 cm 94.3 × 58.6 × 4.2 cm 94.3 × 58.6 × 4.2 cm 94.3 × 58.6 × 4.2 cm
Mass (Approx.)
with Table-Top Stand
20.7 kg 15.4 kg 14.4 kg 14.4 kg
without Table-Top Stand17.1 kg 11.6 kg 11.2 kg 11.2 kg
Supplied accessoriesSee “Checking the accessories” (page 8).
Optional accessoriesWall-Mount Bracket: SU-WL500
3D Glasses: TDG-BR250/TDG-BR200/TDG-BR100/TDG-BR50 (KDL-40HX72x, KDL-40EX72x)
USB Wireless LAN Adapter
Operating temperature0 ºC – 40 ºC
Operating humidity 10% – 80% RH (non-condensing)
(Continued)
 
						

							26GB
Model name KDL-40CX52x37EX72x37EX52x32EX72x
Power and others
Power requirements
220 V – 240 V AC, 50 Hz
Energy Efficiency ClassCA AB
Screen size (measured 
diagonally)Approx. 101.6 cm/
40 inchesApprox. 94.0 cm/
37 inchesApprox. 94.0 cm/
37 inchesApprox. 80.1 cm/
32 inches
Power 
consumptionin “Home”/
“Standard” 
mode120 W 56.0 W 56.0 W 59.0 W
in “Shop”/
“Vivid” mode181 W 105 W 98 W 101 W
Average annual energy 
consumption*1175 kWh 82 kWh 78 kWh 86 kWh
Standby power 
consumption*20.25 W (15 W in 
software / EPG update 
mode) 0.25 W (17 W in 
software / EPG update 
mode)0.3 W (16.5 W in 
software / EPG update 
mode)0.25 W (16 W in 
software / EPG update 
mode)
Display resolution1,920 dots (horizontal) × 1,080 lines (vertical)
Dimensions (Approx.) (w × h × d) 
with Table-Top Stand
99.1 × 63.6 × 25.0 cm 87.8 × 57.9 × 25.0 cm 87.7 × 57.9 × 25.0 cm 75.5 × 51.0 × 21.6 cm
without Table-Top Stand99.1 × 60.6 × 7.1 cm 87.8 × 54.9 × 4.2 cm 87.7 × 54.9 × 4.2 cm 75.5 × 48.0 × 4.2 cm
Mass (Approx.)
with Table-Top Stand
16.3 kg 13.3 kg 13.3 kg 10.4 kg
without Table-Top Stand12.9 kg 10.1 kg 10.1 kg 7.9 kg
Supplied accessoriesSee “Checking the accessories” (page 8).
Optional accessoriesWall-Mount Bracket: SU-WL500
3D Glasses: TDG-BR250/TDG-BR200/TDG-BR100/TDG-BR50 (KDL-37/32EX72x)
USB Wireless LAN Adapter
Operating temperature0 ºC – 40 ºC
Operating humidity 10% – 80% RH (non-condensing)
Model name KDL-32EX52x32EX42x32CX52x
Power and others
Power requirements
220 V – 240 V AC, 50 Hz
Energy Efficiency ClassBBC
Screen size (measured 
diagonally)Approx. 80.1 cm/
32 inchesApprox. 80.0 cm/
32 inchesApprox. 80.1 cm/
32 inches
Power 
consumptionin “Home”/
“Standard” 
mode56.0 W 56.0 W 73.0 W
in “Shop”/
“Vivid” mode88 W 88 W 112 W
Average annual energy 
consumption*182 kWh 82 kWh 107 kWh
Standby power 
consumption*20.3 W (17 W in software / 
EPG update mode) 0.3 W (17 W in software / 
EPG update mode)0.25 W (15 W in software / 
EPG update mode)
Display resolution1,920 dots (horizontal) × 
1,080 lines (vertical)1,366 dots (horizontal) × 
768 lines (vertical)1,920 dots (horizontal) × 
1,080 lines (vertical)
Dimensions (Approx.) (w × h × d) 
with Table-Top Stand
75.5 × 51.0 × 21.6 cm 75.5 × 51.0 × 21.6 cm 79.9 × 53.2 × 23.0 cm
without Table-Top Stand75.5 × 48.0 × 4.2 cm 75.5 × 48.0 × 4.2 cm 79.9 × 50.2 × 7.0 cm
Mass (Approx.)
with Table-Top Stand
10.2 kg 10.2 kg 11.4 kg
without Table-Top Stand7.7 kg 7.7 kg 8.7 kg
Supplied accessoriesSee “Checking the accessories” (page 8).
Optional accessoriesWall-Mount Bracket: SU-WL500
USB Wireless LAN Adapter
Operating temperature0 ºC – 40 ºC
Operating humidity10% – 80% RH (non-condensing)
 
						

							27GB
Additional Information
*1Energy consumption per year, based on the power consumption of the television operating 4 hours per day 
for 365 days. The actual energy consumption will depend on how the television is used. 
*
2Specified standby power is reached after the TV finishes necessary internal processes.
Design and specifications are subject to change without notice.
Model name KDL-26EX32126EX32024EX32x22EX32x
Power and others
Power requirements
220 V – 240 V AC, 50 Hz
Energy Efficiency ClassBBBB
Screen size (measured 
diagonally)Approx. 66.1cm/
26 inchesApprox. 66.1 cm/
26 inchesApprox. 61.0 cm/
24 inchesApprox. 54.8 cm/
22 inches
Power 
consumptionin “Home”/
“Standard” 
mode38.0 W 38.0 W 35.0 W 32.0 W
in “Shop”/
“Vivid” mode63 W 63 W 62 W 52 W
Average annual energy 
consumption*155 kWh 55 kWh 51 kWh 47 kWh
Standby power 
consumption*20.35 W (13 W in 
software / EPG update 
mode)0.35 W (13 W in 
software / EPG update 
mode)0.35 W (13 W in 
software / EPG update 
mode)0.35 W (13 W in 
software / EPG update 
mode)
Display resolution1,366 dots (horizontal) × 768 lines (vertical) 1,920 dots (horizontal) × 
1,080 lines (vertical)1,366 dots (horizontal) × 
768 lines (vertical)
Dimensions (Approx.) (w × h × d) 
with Table-Top Stand
63.1 × 43.3 × 21.5 cm 63.1 × 42.1 × 18.2 cm 58.3 × 39.1 × 18.2 cm 52.9 × 36.2 × 17.2 cm
without Table-Top Stand63.1 × 40.6 × 4.2 cm 63.1 × 40.6 × 4.2 cm 58.3 × 37.6 × 4.2 cm 52.9 × 34.7 × 4.2 cm
Mass (Approx.)
with Table-Top Stand
8.4 kg 7.2 kg 6.2 kg 5.1 kg
without Table-Top Stand6.1 kg 6.1 kg 5.2 kg 4.1 kg
Supplied accessoriesSee “Checking the accessories” (page 8).
Optional accessoriesWall-Mount Bracket: SU-WL100
USB Wireless LAN Adapter
Operating temperature0 ºC – 40 ºC
Operating humidity10% – 80% RH (non-condensing)
 
						

							28GB
Installing the Accessories (Wall-Mount Bracket)
To Customers:
When using the SU-WL500 and SU-WL100 Wall-Mount Bracket, the space between the wall and 
the TV will be 6 cm. Use this space to route cables to the TV. 
For product protection and safety reasons, Sony strongly recommends that installing of your TV be 
performed by Sony dealers or licensed contractors. Do not attempt to install it yourself.
To Sony Dealers and Contractors:
Provide full attention to safety during the installation, periodic maintenance and examination of this 
product.
Your TV can be installed using the SU-WL500 (page 29) and SU-WL100 (page 29) Wall-Mount 
Bracket (sold separately).
 Refer to the Instructions supplied with the Wall-Mount Bracket to properly carry out the 
installation.
 Refer to “Detaching the Table-Top Stand from the TV” (page 9).
When installing the TV on the wall, remove the screws from the rear of the TV. The screws and 
number of screws are available depending on the TV model. (They are fastened in the screw holes 
for wall mounting.) Be sure to store the removed screws in a safe place, keeping them away from 
children.
~
When removing the Table-Top Stand from the TV, lay the display face down on a stable work surface that is 
larger than the TV.
To prevent damaging the surface of the LCD display, make sure to place a soft cloth on the work surface.
Sufficient expertise is required for installing this product, especially to determine the strength of 
the wall for withstanding the TV’s weight. Be sure to entrust the attachment of this product to the 
wall to Sony dealers or licensed contractors and pay adequate attention to safety during the 
installation. Sony is not liable for any damage or injury caused by mishandling or improper 
installation.
6cm
Wall 
×2
×2
BFor KDL-46/40HX72x, KDL-46/40/37/
32EX72x, KDL-46/40/37/32EX52x, 
KDL-32EX42x
×2
×4
BFor KDL-55EX72x
Soft cloth
Soft cloth
 
						

							29GB
Additional Information
SU-WL500, SU-WL100
For KDL-55/46/40/37/32EX72x, 
KDL-46/40HX72x,
KDL-46/40/37/32EX52x, 
KDL-46/40/32CX52x, 
KDL-32EX42xFor KDL-26/24/22EX32x
~
Attach the Mounting Hook using the four screws supplied with the Wall-Mount Bracket.
When attaching the Table-Top Stand again, be sure to fasten the screws (previously removed) to the original 
holes on the rear of the TV.
Screw and Hook locations diagram/table
SU-WL500
×4
Mounting 
HookScrew 
(+PSW 
6 × 16)
Soft cloth
Mounting 
HookScrew 
(+PSW 
4 × 12)
SU-WL100
Soft cloth
Model Name 
KDL-Screw locationHook location
SU-WL500 SU-WL500
55EX72xe, j b
46HX72x/46EX72x/46EX52xe, j b
46CX52xd, g b
40HX72x/40EX72x/40EX52xe, j b
40CX52xd, g b
37EX72x/37EX52xe, j b
32EX72x/32EX52x/32EX42x/32CX52xe, g c
SU-WL100
26EX32x-a
24EX32x-a
22EX32x-b
(Continued)
 
						

							30GB
SU-WL500
SU-WL100
Screw location
When installing the Mounting Hook on the 
TV.Hook location
When installing the TV onto the Base Bracket.
b a
c
Hook location
When installing the TV onto the Base Bracket.
b a