Sony Kdl 32bx420 Operating Instructions

51
Other Information
For SU-WL100 (KDL-22BX321/22BX320 only)
Step 1: Checking the parts required for the installation
Open the Wall-Mount Bracket package and check the contents for all required parts along with the 
Instructions.
Step 2: Adjusting the position of the holders of the Base Plate
Refer to the Instructions for SU-WL100.
Step 3: Deciding on the installation location
Decide where you want to install your TV. Refer to the TV installation dimensions table.
Refer to the Instructions for SU-WL100....

52
Step 5: Preparing the TV for wall mount installation
Follow the steps below to prepare for installing the TV.
1Disconnect all the cables from the TV.
2Align the holes on the left Mounting Hook with the corresponding holes on the rear of the TV.
Secure them to the TV using two screws (supplied with SU-WL100).
Hook locations diagram
Install the TV onto the location “b” of the Base Plate.
Screw 
(+PSW 4 × 12)
Mounting Hook
b
 

53
Other Information
3Adjust the angle of the Mounting Hook.
4Align the holes on the right Mounting Hook with the corresponding holes on the rear of the 
TV.
Secure them to the TV using two screws (supplied with SU-WL100).
Step 6: Installing the TV on the Base Plate
Refer to the Instructions for SU-WL100.
1Connect the cables to the corresponding inputs on the rear of the TV.
For details on the cable connection, see “Connecting Other Equipment” on page 13.
2Install the TV onto the Base Plate.
Mounting...

54 Troubleshooting
Many of the poor pictures and poor sound conditions are related to improper connection of the cables; refer to 
the Quick Setup Guide provided for connections. 
If you have questions, service needs, or require technical assistance related to the use of your Sony TV even 
after you read this operating instructions manual, contact the following:
For US Support:
http://www.sony.com/tvsupport
 or call 1-800-222-SONY (7669)
For Canadian Support:
http://www.sony.ca/support
 or call...

55
Other Information
Poor picture
Picture quality not as good 
as viewed at the store Picture quality depends on the signal content. See Quick Setup Guide 
(supplied) to display the best possible picture for that signal.
Broadcast HD formats have 
poor quality Content and signal quality are controls by the signal provider. Many HD 
channels and content are actually upscaled versions of standard-
definition broadcasts. The picture is affected by the quality of the signal 
received, which varies between...

56
BRAVIA Sync
Cannot find connected 
BRAVIA Sync HDMI 
device Make sure that the Control for HDMI is set up on both the TV and the 
optional device compatible with BRAVIA Sync (see page 23).
Second A/V receiver is not 
listed on the Device List Only one A/V receiver may be used with the BRAVIA Sync and 
Control for HDMI functions at one time (see page 41).
PC Input
No picture / No signal  Confirm the PC is correctly connected to the TV with either the PC IN 
(with an HD15 cable) or with the HDMI IN....

57
Other Information
Black bands appear at the 
edges of the screen Some wide screen programs are filmed in aspect ratios that are greater 
than 16:9 (this is especially common with theatrical releases). Your TV 
will show these programs with black bands at the top and bottom of the 
screen. For more details, check the documentation that came with your 
DVD/Blu-ray (or contact your program provider).
 Programs in 4:3 aspect ratio will have bands on left and right sides of the 
screen.
 Programs broadcast...

58 Important Notices
For Customers in Canada
This Class B digital apparatus complies with Canadian 
ICES-003.
FCC Related Information
This equipment has been tested and found to comply with 
the limits for a Class B digital device, pursuant to Part 15 
of the FCC Rules. These limits are designed to provide 
reasonable protection against harmful interference in a 
residential installation. This equipment generates, uses and 
can radiate radio frequency energy and, if not installed and 
used in accordance...

59
Other Information
Specifications
SystemTelevision system NTSC: American TV standard 
ATSC (8VSB terrestrial): ATSC compliant 8VSB
QAM on cable: ANSI/SCTE 07 2000 (Does not include CableCARD functionality)
Channel coverage Analog terrestrial: 2 - 69 / Digital terrestrial: 2 - 69
Analog Cable: 1 - 135 / Digital Cable: 1 - 135
Panel system LCD (Liquid Crystal Display) Panel
Speaker output 
(except KDL-22BX321/BX320)8 W + 8 W 
Speaker output 
(KDL-22BX321/BX320 only)5 W + 5 W
Input/Output...

60
 Optional accessories availability depends on its stock.
 Design and specifications are subject to change without notice.
Model name KDL-32BX321
32BX32022BX321
22BX320
Power and othersPower requirement 110-240 V AC, 50/60 Hz (U.S.A./Canada/Mexico 120 V AC, 60 Hz)
Power consumption
115 W 55 W
in use
in standby Less than 0.25 W with 120 V AC and with 240 V 
AC less than 0.35 WLess than 0.28 W with 120 V AC and with 240 V 
AC less than 0.40 W
Screen size
(inches measured diagonally)31.5
(32 class)22...