Sony Kdl 32bx320 Operating Instructions

41
Using the Menus
OptionDescription
HDMI SettingsCommunicates with equipment compatible with the Control for HDMI function.
Control for HDMILinks the operations of the TV and the equipment.
For specific Sony equipment compatible with Control for HDMI, this 
setting is applied automatically to the connected equipment when set to 
On.
Device Auto 
Power OffSelect On to have your connected equipment with Control for HDMI 
function powering off automatically when the TV is turned off. 
Select Off to disable...

42
Initial SetupIf you missed the Initial Setup when you first connected the TV or if you want to scan all 
receivable channels, select Initial Setup. Follow the instructions on the screen. Some 
settings such as Picture, Sound, and Parental Lock will not be affected by this Initial 
Setup. If you wish to return your TV to factory settings, please see the Troubleshooting 
section on page 57.
Start-up 
SoundSelect On to play sound when the TV is turned on. Select Off to disable it.
OptionDescription...

43
Using the Menus
Using the Eco Settings
OptionDescription
ResetResets the current Eco settings to the default values.
Power SavingSelect from Off, Low, High, Picture Off to adjust your TV’s power consumption. By 
selecting the High option, you will reduce the power consumption more than the other 
available settings.
While Picture Off is set, pressing VO L + /
– or MUTING buttons will not disable this 
function. Press other buttons to disable it.
Idle TV 
Standby
Select to automatically power off the...

44
Other Information
PC Input Signal Reference Chart for PC and HDMI IN
After connecting the PC to the TV, set the output signal from the PC according to the chart below.
For KDL-32BX321/KDL-32BX320/KDL-22BX321/KDL-22BX320
For KDL-46BX421/KDL-46BX420/KDL-40BX421/KDL-40BX420/KDL-32BX421/KDL-32BX420
* The 1080p timing when applied to the HDMI input will be treated as a video timing and not PC timing. 
This affects Picture settings and Wide Mode settings. To view PC content set Scene Select to 
Graphics,...

45
Other Information
Using a Wall-Mount Bracket
Your TV can be mounted on a wall using a Wall-Mount Bracket (not supplied) out of the box as 
packaged. Some larger size TV may require removing the Table-Top Stand; refer to the 
instructions provided with the TV.
Prepare the TV for the Wall-Mount Bracket before making cable connections.
For product protection and safety reasons, Sony strongly recommends that you use the Wall-
Mount Bracket designed for your TV and the installation should be performed by a...

46 Installing the Wall-Mount Bracket
To  C u s t o m e r s
Your TV can be wall-mounted using SU-WL500 or SU-WL100 Wall-Mount Bracket (sold 
separately).
Please provide this installation information as well as the instruction supplied with SU-WL500 or 
SU-WL100 Wall-Mount Bracket to your installer. 
To Sony Dealers and Licensed Contractors
To avoid injury and property damage, read these instructions carefully. Periodic inspection and 
maintenance is highly recommended to ensure that TV is securely...

47
Other Information
For SU-WL500 (except KDL-22BX321/22BX320)
Step 1: Checking the parts required for the installation
Open the Wall-Mount Bracket package and check the contents for all required parts along with the 
Instructions.
Step 2: Deciding on the installation location
Decide where you want to install your TV. Refer to the TV installation dimensions table.
Refer to the Instructions for SU-WL500.
Dimension Table
Figures in the above table may differ slightly depending on the installation.
CAUTION...

48
Step 3: Installing the Base Bracket on the wall
Refer to the Instructions for SU-WL500.
Step 4: Preparing the TV for wall mount installation
Follow the steps below to prepare for installing the TV.
1Disconnect all the cables from the TV.
2Secure the Mounting Hook to the rear of the TV.
Determine the screw locations and secure the Mounting Hooks to the rear of the TV. Refer to 
the “Screw and Hook Locations Diagram/Table” shown below.
1Secure the Mounting Hooks to the rear of the TV using only the...

49
Other Information3Adjust the angle of the Mounting Hook.
Refer to the Instructions for SU-WL500.
4Remove the screws guided by the arrow marks   of the TV.
Do not remove any other screws from the TV.
Screw location
When installing the Mounting Hooks on the TV.
Hook location
When installing the TV onto Base Bracket.
Wall
TV
(Continued)
 

50
5Lift the TV off the Table-Top Stand. Make sure that you carry out this task with at least two or 
three people (see page 6 for details).
Do not attempt to lift the TV by yourself.
Step 5: Installing the TV on the wall
Refer to the Instructions for SU-WL500.
~
 When you put the TV back on the Table-Top Stand, reverse the above steps.
 When moving the TV, do not squeeze the bottom of the front panel too tight.
 Remove the screws or install the Mounting Hook on a stable and level surface.