Home > Sony > Television > Sony Kdl 26s2020 Operating Instructions

Sony Kdl 26s2020 Operating Instructions

    Download as PDF Print this page Share this page

    Have a look at the manual Sony Kdl 26s2020 Operating Instructions online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 980 Sony manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    							
    KDL-46S2000
    KDL-40S2000
    KDL-32S2000
    KDL-32S2020
    KDL-26S2010KDL-46S2010
    KDL-40S2010
    KDL-32S2010
    KDL-26S2000
    KDL-26S2020
    © 2006 Sony Corporation
    LCD Digital Colour TV
    2-684-953-
    11(1)
    U
    Operating Instructions 
    Before operating the TV, please read the “Safety 
    information” section of this manual.
    Retain this manual for future reference.
    For useful information about Sony products
     
    						
    							
    2 GB
    NOTICE FOR 
    CUSTOMERS IN THE 
    UNITED KINGDOM
    A moulded plug complying with BS1363 is fitted to this 
    equipment for your safety and convenience.
    Should the fuse in the plug supplied need to be replaced, a 13 
    AMP fuse approved by ASTA or BSI to BS 1362 (i.e., 
    marked with   or  ) must be used.
    When an alternative type of plug is used it should be fitted 
    with a 13 AMP FUSE, otherwise the circuit should be 
    protected by a 13 AMP FUSE at the distribution board.
    If the plug supplied with this equipment has a detachable fuse 
    cover, be sure to attach the fuse cover after you change the 
    fuse. Never use the plug without the fuse cover. If you should 
    lose the fuse cover, please contact your nearest Sony service 
    station.
    How to replace the fuse
    Open the fuse compartment with a blade screwdriver, and 
    replace the fuse.
    • To prevent the risk of electric shock, if the mains lead or plug is damaged, do not insert the plug into the mains 
    socket outlet. This plug cannot be used and should be 
    destroyed.
     To prevent the risk of fire or electric shock, do not expose  the TV set to rain or moisture.
     Dangerously high voltages are present inside the TV set.  Do not open the cabinet. Refer servicing to qualified 
    personnel only.
     Any functions related to Digital TV ( ) will only  work in countries or areas where DVB-T (MPEG2) digital 
    terrestrial signals are broadcasted. Please confirm with 
    your local dealer if you can receive a DVB-T signal where 
    you live.
     Although this TV set follows DVB-T specifications, 
    compatibility with future DVB-T digital terrestrial 
    broadcasts cannot be guaranteed.
     Some Digital TV functions may not be available in some  countries.
    Thank you for choosing this Sony product.
    Before operating the TV, please read this manual 
    thoroughly and retain it for future reference.
    Trademark information
      is a registered trademark of the DVB Project
     Manufactured under license from BBE Sound, Inc. 
    Licensed by BBE Sound, Inc. under one or more of the 
    following US patents: 5510752, 5736897. BBE and BBE 
    symbol are registered trademarks of BBE Sound, Inc.
     TruSurround XT, SRS and (
    z) symbol are trademarks of 
    SRS Labs, Inc.
    TruSurround XT technology is incorporated under license 
    from SRS Labs, Inc.
     HDMI, the HDMI logo and  High-Definition Multimedia 
    Interface are trademarks or registered trademarks of 
    HDMI Licensing, LLC. 
     The illustrations used in this manual are of the KDL- 32S2000/KDL-32S2010/KDL-32S2020 unless otherwise 
    state.
    WARNING
    Notice for Digital TV function
    FUSE
    Introduction
     
    						
    							
    3 GB
    Table of Contents
    Safety information ..................................................................................................................... 7
    Precautions .................................................................................................................... ......... 10
    Overview of the remote ........................................................................................................ 1 1
    Overview of the TV buttons and indicators ........................................................................ 12
    Watching TV.................................................................................................................... ........ 13
    Checking the Digital Electronic Programme Guide (EPG)  ............................................. 16
    Using the Favourite list  .................................................................................................. 18
    Viewing pictures from connected equipment .......................................................................... 19
    Navigating through menus ...................................................................................................... 2 0
    Picture menu ................................................................................................................... ........ 21
    Sound menu ..................................................................................................................... ....... 23
    Screen menu .................................................................................................................... ....... 25
    Set-up menu.................................................................................................................... ........ 26
    PC Settings menu ............................................................................................................... .... 28
    Analogue Set-up menu (Analogue mode only) ....................................................................... 29
    Digital Set-up menu  ....................................................................................................... 31
    Connecting optional equipment............................................................................................... 33
    Specifications ................................................................................................................. ......... 36
    Troubleshooting ................................................................................................................ ...... 38
    Index .......................................................................................................................... ............. 40
    Start-up Guide  4
    Watching TV
    Using MENU Functions
    Using Optional Equipment
    Additional Information
     : for digital channels only
     
    						
    							
    4 GB
    Start-up Guide
    1: Checking the 
    accessories
    Remote RM-ED005 (1)
    Size AA batteries (R6 type) (2)
    Mains lead (Type BF) (1)
    Coaxial cable (1)
    Cable holder (1)
    Support belt (1) and screws (2)
    To insert batteries into the remote
    Notes
     Observe the correct polarity when inserting batteries.
     Dispose of batteries in an environmentally friendly way. Certain regions may regulate disposal of the battery. 
    Please consult your local authority.
     Do not use different types of batteries together or mix old  and new batteries.
     Handle the remote with care. Do not drop or step on it, or  spill liquid of any kind onto it.
     Do not place the remote in a location near a heat source, or 
    in a place subject to direct sunlight, or in a damp room.
    2: Connecting an aerial/
    VCR
    Connecting an aerial only
    Connecting an aerial and VCR
    Coaxial cable (supplied)
    Mains lead (supplied)
    Scart lead (not supplied) RF lead
    (not supplied)
    VCR
    Mains lead
    (supplied)
     
    						
    							
    5 GB
    Start-up Guide3: Bundling the cables
    4: Preventing the TV 
    from toppling over
    5: Selecting the 
    language and country/
    region
    1Connect the TV to your mains socket (220-
    240V AC, 50Hz).
    2Press 1 on the TV (top side).
    When you switch on the TV for the first time, the 
    Language menu appears on the screen.
    When the TV is in standby mode (the 
    1 (standby) 
    indicator on the TV (front) is red), press  "/1 on 
    the remote to switch on the TV.
    2
    3
    1
    1
    2
    3,4
    3,4 2
    Continued
     
    						
    							
    6 GB
    3Press F/f to select the language 
    displayed on the menu screens, then press  .
    4Press F/f to select the country/region in 
    which you will operate the TV, then press  .
    If the country/region in which you want to use the 
    TV does not appear in the list, select “-” instead of 
    a country/region.
    The message confirming the TV start auto-tuning 
    appears on the screen, then go to “6: Auto-tuning 
    the TV”.
    6: Auto-tuning the TV
    The TV will now search for and store all available TV 
    channels.
    1Before you start auto-tuning the TV, insert 
    a pre-recorded tape into the VCR 
    connected to the TV (page 4) and start play 
    back.
    The video channel will be located and stored on 
    the TV during auto-tuning.
    If no VCR is connected to the TV, this procedure 
    is not required. Go to step 2.
    2Select “OK”, then press  .
    The TV starts searching for all available digital 
    channels, followed by all available analogue 
    channels. This may take some time, please be 
    patient and do not press any buttons on the TV or 
    remote.
    If a message appears for you to confirm the aerial 
    connections
    No digital or analogue channels were found. 
    Check all the aerial connections and press   to 
    start auto-tuning again.
    3When the Programme Sorting menu 
    appears on the screen, follow the steps of 
    “Programme Sorting” (page 29).
    If you do not wish to change the order in which the 
    analogue channels are stored on the TV, go to step 
    4.
    4Press MENU to exit.
    The TV has now tuned in all the available 
    channels.
    4 2
     
    						
    							
    7 GB
    Safety information
    Mains lead
     Unplug the mains lead when moving the TV 
    set. Do not move the 
    TV set with the mains 
    lead plugged in. It may 
    damage the mains lead 
    and result in fire or electric shock.
     If you damage the mains lead, it may  result in fire or electric shock.
    – Do not pinch, bend, or twist the mains lead excessively. The core 
    conductors may be exposed or 
    broken, causing a short-circuit, 
    which may cause fire or electric 
    shock.
    – Do not modify or damage the mains  lead. 
    – Do not put anything heavy on the  mains lead. Do not pull the mains 
    lead.
    – Keep the mains lead away from heat sources.
    – Be sure to grasp the plug when disconnecting the mains  lead.
     If the mains lead is damaged, stop using it and ask your  dealer or Sony service centre to exchange it.
     Do not use the supplied mains lead on any other  equipment.
     Use only an original Sony mains lead, not other brands. 
    Mains lead/cable protection
    Pull out the mains lead/cable by 
    the plug. Do not pull on the mains 
    lead/cable itself.
    Mains
    Do not use a poor fitting mains socket. Insert 
    the plug fully into the mains socket. A poor 
    fit may cause arcing and result in fire. 
    Contact your electrician to have the mains 
    socket changed.
    For the TV set with a three-wire 
    grounding type AC mains plug
    This TV set must be connected to an AC mains socket with a 
    protective earthing connection.
    Optional accessories
    Observe the following when installing the 
    TV set using a wall-mount bracket. If you do 
    not do so, the TV set may fall and cause 
    serious injury.   It is strongly recommended that you use Sony accessories 
    for safety reasons:
    – KDL-46S2000/KDL-46S2010/KDL-40S2000/
    KDL-40S2010: 
    Wall-mount bracket SU-WL51
    – KDL-32S2000/KDL-32S2010/KDL-32S2020/
    KDL-26S2000/KDL-26S2010/KDL-26S2020: 
    Wall-mount bracket SU-WL31
     It is strongly recommended that you use the official Sony  wall-mount bracket to allow adequate air circulation and 
    to avoid dust build up around the TV, wall and ceiling.
     Secure the TV set properly, following the instructions  supplied with your wall-mount bracket when installing the 
    TV set.
    Installation
     If the TV set is to be installed on a wall, have the installation 
    carried out by qualified service 
    men. Improper installation may 
    render the TV set unsafe.
     The TV should be installed near an easily accessible mains 
    socket.
    Medical institutions
    Do not place this TV set in a place 
    where medical equipment is in 
    use. It may cause malfunction of 
    medical instruments.
    Carrying
     Before carrying the TV set, disconnect all the cables from the TV set.
     When you carry the TV set by hand,  hold the TV set as illustrated on the 
    right. If you do not do so, the TV set 
    may fall and be damaged or cause 
    serious injury. If the TV set has been 
    dropped or damaged, have it checked 
    immediately by qualified service 
    personnel.
     When transporting it, do not subject the  TV set to jolts or excessive vibration. The TV set may fall 
    and be damaged or cause serious injury.
     When you carry the TV set in for repair or when you move  it, pack it using the original carton and packing material.
     Carrying the TV set requires two or more people.
    Ventilation
     Never cover the ventilation  holes in the cabinet. It may 
    cause overheating and result in 
    fire.
     Unless proper ventilation is provided, the TV set may  gather dust and get dirty. For proper ventilation, observe 
    the following:
    – Do not install the TV set turned backwards or sideways. 
    – Do not install the TV set turned over or upside down. 
    – Do not install the TV set on a shelf or in a closet. 
    – Do not place the TV set on a rug or bed. 
    – Do not cover the TV set with cloth, such as curtains, or 
    items such as newspapers, etc.
    Continued
     
    						
    							
    8 GB
     Leave some space around the TV set. Otherwise, air-circulation may be inadequate and cause overheating, 
    which may cause fire or damage to the TV set.
     When installing the TV set on the wall, leave at least  10 cm space from the bottom, and at least 5.5 cm between 
    the back of the TV set and the wall.
     Never install the TV set as follows:
    Ventilation holes
    Do not insert anything in the ventilation 
    holes. If metal or liquid is inserted in these 
    holes, it may result in fire or electric shock.
    Placement
     Never place the TV set in hot, humid  or excessively dusty places.
     Do not install the TV set where  insects may enter.
     Do not install the TV set where it  may be exposed to mechanical vibration.
     Place the TV set on a stable, level surface.  Otherwise, the TV set may fall and cause 
    injury.
     Do not install the TV set in a location  where it may protrude, such as on or 
    behind a pillar, or where you might bump 
    your head on it. Otherwise, it may result 
    in injury.
    Water and moisture
     Do not use this TV set near water – for example, near a bathtub or 
    shower room. Also do not expose 
    to rain, moisture or smoke. This 
    may result in fire or electric shock.  Do not touch the mains lead and the TV 
    set with wet hands. Doing so may cause 
    electric shock or damage to the TV set.
    Moisture and flammable objects
     Do not let this TV set get wet. Never spill liquid of any kind on the TV set. 
    If any liquid or solid object does fall 
    through openings in the cabinet, do 
    not operate the TV set. It may result in 
    electric shock or damage to the TV set.
    Have it checked immediately by 
    qualified service personnel.
     To prevent fire, keep flammable objects (candles, etc.) and  electric bulbs away from the TV set.
    Oils
    Do not install this TV set in restaurants that use oil. Dust 
    absorbing oil may enter and damage the TV set.
    Fall
    Place the TV set on a secure, stable stand. Do 
    not hang anything on the TV set. If you do, 
    the TV set may fall from the stand or wall-
    mount bracket, causing damage or serious 
    injury.
    Do not allow children to climb on the TV set.
    Vehicle or ceiling
    Do not install this TV set in a 
    vehicle. The motion of the vehicle 
    may cause the TV set to fall down 
    and cause injury. Do not hang this 
    TV set from the ceiling.
    Ships and other vessels
    Do not install this TV set on a ship 
    or other vessel. If the TV set is 
    exposed to seawater, it may cause 
    fire or damage the TV set.
    Outdoor use
     Do not expose the TV set to direct sunlight. The TV set may 
    heat up and this may result in 
    damage to the TV set.
     Do not install this TV set  outdoors.
    Wiring
     Unplug the mains lead when wiring cables. When hooking up, be sure to unplug the mains lead for your safety.
     Take care not to catch your feet on the cables. It may  damage the TV set.
    Cleaning
     Unplug the mains lead when cleaning the mains plug and this TV set. If you do not, 
    it may result in electric shock.
     Clean the mains plug regularly. If the  plug is covered with dust and it picks up 
    moisture, its insulation may deteriorate 
    and result in fire.
    30 cm
    Leave at least this much space.
    10 cm 10 cm 15 cm
    Air circulation 
    is blocked.Air circulation 
    is blocked.
    Wall Wall
     
    						
    							
    9 GB
    Lightning storms
    For your own safety, do not touch any 
    part of the TV set, mains lead, or 
    aerial lead during lightning storms.
    Damage requiring service
    If the surface of the TV set cracks, do not touch it until you 
    have unplugged the mains lead. Otherwise electric shock 
    may result.
    Servicing
    Do not open the cabinet. Entrust the 
    TV set to qualified service personnel 
    only.
    Small accessories removal and 
    fittable
    Keep accessories out of children’s reach. If they are 
    swallowed, choking or suffocation may occur. Call a doctor 
    immediately.
    Broken pieces
    D o  n o t  t h r o w  an y th in g  a t t h e  T V  s e t.  T h e  
    screen glass may break by the impact and 
    cause serious injury.
    When not in use
    For environmental and safety 
    reasons, it is recommended that 
    the TV set is not left in standby 
    when unused. Disconnect from 
    the mains. However, some TV 
    sets may have features which need the TV set to be left in 
    standby to work correctly. The instructions in this manual 
    will inform you if this applies.
    Viewing the TV
     To view the TV comfortably, the recommended viewing position is from four to seven times the screen’s vertical 
    length away from the TV set.
     View the TV in moderate light, as viewing the TV in poor  light strains your eyes. Watching the screen continuously 
    for long periods of time can also strain your eyes.
     If the angle of the TV set is to be adjusted, steady the base  of the stand with your hand to prevent the TV set from 
    becoming separated from the stand. Be careful not to get 
    your fingers caught between the TV set and the stand.
    Volume adjustment
     Adjust the volume so as not to trouble your neighbours. Sound carries very easily at night time. Therefore, closing 
    the windows or using headphones is suggested.
     When using headphones, adjust the volume so as to avoid  excessive levels, as hearing damage may result.
    Overloading
    This TV set is designed to operate on 
    a 220–240 V AC supply only. Take 
    care not to connect too many 
    appliances to the same mains socket 
    as this could result in fire or electric 
    shock.
    Heat
    Do not touch the surface of the TV set. It remains hot, even 
    after the TV set has been turned off for some time.
    Corrosion
    If you use this TV set near the seashore, salt may corrode 
    metal parts of the TV set and cause internal damage or fire. 
    It may also shorten the life of the TV set. Steps should be 
    taken to reduce the humidity and moderate the temperature 
    of the area where the TV set is located.
    Handling
     When lifting the TV set or moving the panel of the TV set, hold it firmly from the 
    bottom.
     For the KDL-46S2000/KDL- 46S2010, when lifting or moving the 
    TV, be sure to hold the panel firmly 
    as illustrated. Place your palm 
    directly under the panel, from the 
    rear of the TV.
     
    						
    							
    10 GB
    Precautions
    LCD Screen
     Although the LCD screen is made with high-precision technology and 99.99% or more of the pixels are effective, 
    black dots may appear or bright points of light (red, blue, 
    or green) may appear constantly on the LCD screen. This 
    is a structural property of the LCD panel and is not a 
    malfunction.
     Do not expose the LCD screen surface to the sun. Doing  so may damage the screen surface.
     Do not push or scratch the front filter, or place objects on 
    top of this TV set. The image may be uneven or the LCD 
    panel may be damaged.
     If this TV set is used in a cold place, a smear may occur in  the picture or the picture may become dark.
    This does not indicate a failure. These phenomena 
    disappear as the temperature rises.
     Ghosting may occur when still pictures are displayed  continuously. It may disappear after a few moments.
     The screen and cabinet get warm when this TV set is in  use. This is not a malfunction.
     The LCD contains a small amount of liquid crystal and  mercury. The fluorescent tube used in this TV set also 
    contains mercury. Follow your local ordinances and 
    regulations for disposal.
    Fluorescent lamp
    This TV set uses a special fluorescent lamp as its light 
    source. If the screen image becomes dark, flickers, or does 
    not appear, the fluorescent lamp has worn out and the LCD 
    screen should be replaced. For replacement, consult qualified 
    service personnel.
    Installing the TV set
     Do not install the TV set in places subject to extreme temperature, for example in direct sunlight, or near a 
    radiator, or heating vent. If the TV set is exposed to 
    extreme temperature, the TV set may overheat and cause 
    deformation of the casing or cause the TV set to 
    malfunction.
     The TV set is not disconnected from the mains when the  TV set is switched off. To disconnect the TV set 
    completely, pull the plug from the mains.
     To obtain a clear picture, do not expose the screen to direct  illumination or direct sunlight. If possible, use spot 
    lighting directed down from the ceiling.
     Do not install optional components too close to the TV set.  Keep optional components at least 30 cm away from the 
    TV set. If a VCR is installed in front of the TV set or 
    beside the TV set, the picture may become distorted.
     Picture distortion and/or noisy sound may occur if the TV  set is positioned in close proximity to any equipment 
    emitting electromagnetic radiation.
    Handling and cleaning the screen surface/cabinet of 
    the TV set
    To avoid material degradation or screen coating degradation, 
    observe the following precautions.
     Do not push on the screen, scratch it with a hard object, or throw anything at it. The screen may be damaged.
     Do not touch the display panel after operating the TV set  continuously for a long period as the display panel 
    becomes hot.
     We recommend that the screen surface be touched as little  as possible.
     To remove dust from the screen surface/cabinet, wipe  gently with a soft cloth. If dust is persistent, wipe with a 
    soft cloth slightly moistened with a diluted mild detergent 
    solution.
     Never use any type of abrasive pad, alkaline/acid cleaner,  scouring powder, or volatile solvent, such as alcohol, 
    benzene, thinner or insecticide. Using such materials or 
    maintaining prolonged contact with rubber or vinyl 
    materials may result in damage to the screen surface and 
    cabinet material.
     The ventilation holes can accumulate dust over time. To  ensure proper ventilation, we recommend removing the 
    dust periodically (once a month) using a vacuum cleaner.
    Disposal of Old Electrical & 
    Electronic Equipment 
    (Applicable in the European 
    Union and other European 
    countries with separate 
    collection systems)
    This symbol on the product or on 
    its packaging indicates that this 
    product shall not be treated as 
    household waste. Instead it shall 
    be handed over to the applicable 
    collection point for the recycling 
    of electrical and electronic equipment. By ensuring this 
    product is disposed of correctly, you will help prevent 
    potential negative consequences for the environment and 
    human health, which could otherwise be caused by 
    inappropriate waste handling of this product. The recycling 
    of materials will help to conserve natural resources. For more 
    detailed information about recycling of this product, please 
    contact your local Civic Office, your household waste 
    disposal service or the shop where you purchased the 
    product.
    Disposal of the TV set
     
    						
    All Sony manuals Comments (0)

    Related Manuals for Sony Kdl 26s2020 Operating Instructions