Sony Kdl 26bx321 Operating Instructions

							31 GB
Using MENU Functions
Label
Assigns a name of your choice, up to five letters or numbers, to the selected channel.
AFT
Allows you to fine-tune the selected programme number manually if you feel that a 
slight tuning adjustment will improve the picture quality.
Audio Filter
Improves the sound for individual channels in the case of distortion in mono 
broadcasts. Sometimes a non-standard broadcast signal can cause sound distortion or 
intermittent sound muting when watching mono programmes.
If you do not experience any sound distortion, we recommend that you leave this 
option set to the factory setting “Off”.
~
 “Audio Filter” is not available when “System” is set to “L”.
Skip
Skips unused analogue channels when you press PROG/CH +/- to select channels. 
(You can still select a skipped channel using the number buttons.)
Confirm
Saves changes made to the “Manual Programme Preset” settings.
“Programme Sorting” (Only in analogue mode): Changes the order in which the 
analogue channels are stored on the TV.
1Press 
F/f to select the channel you want to move to a new position, 
then press 
g.
2Press 
F/f to select the new position for your channel, then press  .
Digital Set-up“Digital Tuning”
“Digital Auto Tuning”: 
Tunes in the available digital channels.
This option allows you to retune the TV after moving house, or to search for new 
channels that have been launched by broadcasters. Press  .
“Programme List Edit”:
Removes any unwanted digital channels stored on the TV, and changes the order 
of the digital channels stored on the TV.
1Press 
F/f to select the channel you want to remove or move to a new 
position.
Press the number buttons to enter the known three-digit programme number of the 
broadcast you want.
2Remove or change the order of the digital channels as follows:
To remove the digital channel
Press  . After a confirmation message appears, press G to select “Yes”, then press  .
To change the order of the digital channels
Press g, then press F/f to select the new position for the channel and press G.
3Press  RETURN.
~
 When “Cable” is selected this function may not be available in some countries. 
“Digital Manual Tuning”:
Tunes the digital channels manually.
1Press the number button to select the channel number you want to 
manually tune, then press 
F/f to tune the channel.
2When the available channels are found, press
  to store programmes.
Repeat the above procedure to manually tune other channels.
~
 Not available for Cable connection.
Continued
 
						

							32 GB
“Subtitle Set-up”
“Subtitle Setting”: When “For Hard Of Hearing” is selected, some visual aids 
may also be displayed with the subtitles (if TV channels broadcast such 
information).
“Primary Preferred Language”: Selects preferred language which subtitles are 
displayed in.
“Secondary Preferred Language”: Selects secondary preferred language which 
subtitles are displayed in.
“Audio Set-up”
“Audio Type”: Switches to broadcast for the hearing impaired when “For Hard 
Of Hearing” is selected.
“Primary Preferred Language”: Selects the preferred language used for a 
programme. Some digital channels may broadcast several audio languages for a 
programme.
“Secondary Preferred Language”: Selects the secondary preferred language 
used for a programme. Some digital channels may broadcast several audio 
languages for a programme.
“Audio Description”: Provides audio description (narration) of visual 
information if TV channels broadcast such information.
“Mixing Level”: Adjusts the TV main audio and Audio Description output levels.
z This option is only available when “Audio Description” is set to “On”.
“MPEG Audio Level”: Adjusts the MPEG audio sound level.
“Technical Set-up”
“Auto Service Update”: Enables the TV to detect and store new digital services 
as they become available.
“System Update”: This TV set is capable of receiving software upgrades via the 
broadcast signal. In order to receive upgrades the System Update option in the 
Technical Setup menu should be set to “On”. When an upgrade is detected the user 
will be informed by a series of on screen displays on how to proceed with the 
upgrade. Please do not disconnect the set from the mains during the installation 
procedure.
“System Information”: Displays the current software version and the signal 
level.
“Time Zone”: Allows you to manually select the time zone you are in, if it is not 
the same as the default time zone setting for your country/region.
~ When “Cable” is selected this function may not be available in some countries. 
“Auto DST”: Sets whether or not to automatically switch between summer time 
and winter time.
 “On”: Automatically switches between summer time and winter time according to the 
calendar.
 “Off”: The time is displayed according to the time difference set by “Time Zone”.
~ When “Cable” is selected this function may not be available in some countries. 
“Service Replacement”: Select “On” to automatically change the channel when 
broadcaster changes transmission of the viewing programme to a different 
channel.
“CA Module Set-up”
Allows you to access a pay TV service once you obtain a Conditional Access Module (CAM) 
and a view card. See page 19 for the location of the   (PCMCIA) socket.
 
						

							33 GB
Using MENU Functions
Sets an age restriction for programmes. Any programme that exceeds the age restriction can only be watched 
after a PIN Code is entered correctly.
~ For cable operators in Netherlands, the PIN code should be entered when the programme rating is above or equal to the age 
you specify.
1Press the number buttons to enter your existing PIN code.
If you have not previously set a PIN, a PIN code entry screen appears. Follow the instructions of “PIN Code” below.
2Press F/f to select the age restriction or “None” (for unrestricted watching), then press  .
3Press  RETURN.
Parental Lock
PIN CodeTo set your PIN for the first time
1Press the number buttons to enter the new PIN code.
2Press  RETURN.
To change your PIN
1Press the number buttons to enter your existing PIN code.
2Press the number buttons to enter the new PIN code.
3Press  RETURN.
z PIN code 9999 is always accepted.
Change PIN Code Selects to change your PIN code.
Parental Lock Select the age of the youngest viewer (3 ~ 18). Select “None” for no registers.
These selectable items may change depending on the country setting.
Digital Programme 
LockLocks/unlocks programmes and checks the status of programmes.
1Press the number buttons to enter your existing PIN code or to set the 
new one.
2Press 
F/f to navigate across the programmes and press   to change 
between “Locked” and “Unlocked” status. 
External Input LockLocks an external input from being watched. To view a blocked external input, select 
“Unblocked”.
 
						

							34 GB
Set-up
USB Auto Start Automatically enters the thumbnail view of the last played Photo/Music/Video when 
the TV is turned on and a USB device is connected to the USB port then turned on.
Sleep TimerSets a period of time after which the TV automatically switches itself into standby 
mode. 
When the “Sleep Timer” is activated, the  (Sleep Timer) indicator on the TV front 
panel lights up in orange.
z 
 When you turn off the TV and turn it on again, “Sleep Timer” is reset to “Off”.
 A notification message appears on the screen one minute before the TV switches to standby 
mode.
Auto Start-upStarts the initial set-up to select the language, country/region and location, and tune 
in all available digital and analogue channels. Usually, you do not need to do this 
operation because the language and country/region will have been selected and 
channels already tuned when the TV was first installed. However, this option allows 
you to repeat the process (e.g., to retune the TV after moving house).
LanguageSelects the language in which the menus are displayed.
Start-up SoundSelect “On” to play sound when the TV is turned on. Select “Off” to disable it.
AV Set-upAssigns a name to any equipment connected to the side and rear sockets. The name 
will be displayed briefly on the screen when the equipment is selected.
1Press 
F/f to select the desired input source, then press  .
2Press 
F/f to select the desired option below, then press  .
AV1 (or AV2/HDMI1/HDMI2/Component/PC), CABLE, SAT, VCR, DVD/BD, 
HOME THEATRE, GAME, CAM, DIGITAL CAMERA, PC: Uses one of the 
preset labels to assign a name to connected equipment.
 “Edit”: Creates your own label.
1Press F/f to select the desired letter or number (“_” for a blank 
space), then press 
g.
If you input a wrong character
Press G/g to select the wrong character. Then, press F/f to select the correct 
character.
2Repeat the procedure in step 1 until the name is completed, then 
press .
HDMI Set-upAllows the TV to communicate with equipment that is compatible with the control 
for HDMI function, and connected to the HDMI sockets of the TV. Note that 
communication settings must also be made on the connected equipment.
“Control for HDMI”: Sets whether or not to link the operations of the TV and the 
connected equipment that is compatible with control for HDMI.
“Auto Devices Off”: When this is set to “On”, the connected equipment that is 
compatible with control for HDMI turns off when you switch the TV to standby 
mode using the remote.
“Auto TV On”: When this is set to “On”, the TV turns on when you turn on the 
connected equipment that is compatible with control for HDMI.
“HDMI Device List”: Displays a list of connected equipment that is compatible 
with control for HDMI.
“Device Control Keys”: If it is set to “Tuning Keys”, you can select a channel tuned 
by connected equipment and if it is set to “Menu Keys” you can navigate through the 
menus of the connected equipment using the remote.
 
						

							35 GB
Using MENU Functions
~ Energy efficiency reduces power consumption and thus saves money by reducing electricity bills.
 When not in use
– If you will not be using the TV set for several days, the TV set should be disconnected from the mains for environmental 
and safety reasons.
– As the TV set is not disconnected from the mains when the TV set is just turned off, pull the plug from the mains to 
disconnect the TV set completely.
– However, some TV sets may have features that require the TV set to be left in standby to work correctly.
DivX® VOD“DivX® VOD Registration Code”: Displays the registration code that is required 
to play DivX® VOD content.
“DivX® VOD Deregistration Code”: Displays the deregistration code that is 
required to play DivX® VOD content.
USB System UpdateUpdates the TV system using USB memory.
Product SupportDisplays your TV’s product information.
Factory SettingsResets all settings to factory settings. After completing this process, the initial set-up 
screen is displayed.
Eco
ResetResets all the “Eco” settings to the factory settings.
Power SavingSelects the power saving mode to reduce the power consumption of the TV.
“Standard”: Default settings.
“Reduce”: Reduces the power consumption of the TV.
“Picture Off”: Switches off the picture. You can listen to the sound with the picture 
off.
Idle TV StandbySelects the time (“1h”, “2h” or “4h”) to set the TV into standby mode automatically, 
if you do not operate the TV for the specified period of time.
Light SensorAutomatically optimises the picture settings according to the ambient light in the 
room.
~ Do not put anything over the sensor, doing so may affect its function. Check the position of 
the sensor (page 14).
PC Power 
ManagementWhen this is set to “On,” turns to standby mode if no PC signal is received. Only 
available in PC input.
 
						

							36 GB
Additional Information
Installing the Accessories (Wall-Mount Bracket)
To Customers:
For product protection and safety reasons, Sony strongly recommends that installing of your TV be 
performed by Sony dealers or licensed contractors. Do not attempt to install it yourself.
To Sony Dealers and Contractors:
Provide full attention to safety during the installation, periodic maintenance and examination of this 
product.
Your TV can be installed using the Wall-Mount Bracket SU-WL500 or SU-WL100 (sold 
separately).
 Refer to the Instructions supplied with the Wall-Mount Bracket to properly carry out the 
installation.
 Refer to “Detaching the Table-Top Stand from the TV” (page 8).
~ Place the TV on the Table-Top Stand, when securing the Mounting Hook.
Note when installing
When using the SU-WL500 or SU-WL100 Wall-Mount Bracket, the space between the wall and the TV will be 
6 cm. Use this space to route cables to the TV.
20151
050
20151050
Screw
(+PSW6 × 16)
Mounting HookSquare hole SU-WL100
(KDL-26BX321/KDL-26BX320)SU-WL500
(except KDL-26BX321/KDL-26BX320)
Screw
(+PSW4 × 12)
Mounting Hook
6 cm
Sufficient expertise is required for installing this product, especially to determine the strength of the wall for 
withstanding the TV’s weight. Be sure to entrust the attachment of this product to the wall to Sony dealers 
or licensed contractors and pay adequate attention to safety during the installation. Sony is not liable for any 
damage or injury caused by mishandling or improper installation.
 
						

							37 GB
Additional Information
Unit: cm
Unit: cm
Figures in the above table may differ slightly depending on the installation.
The wall that the TV will be installed on should be capable of supporting a weight of at least four times that of 
the TV. Refer to “Specifications” (page 39) for its weight.
TV installation dimensions table
Model nameDisplay dimensionsScreen centre 
dimensionLength for each mounting angle
Angle (0°) Angle (20°)
AB CDEFGH
KDL-26BX321
KDL-26BX32066.8 42.4 11.7 33.6 14.7 24.4 40.3 33.8
Model NameDisplay dimensionsScreen centre 
dimensionLength for each mounting angle
Angle (0°) Angle (20°)
AB CDEFGH
KDL-40NX520100.0 60.9 12.2 42.8 14.7 33.4 57.2 46.4
KDL-40BX42099.2 59.8 12.2 42.5 16.0 34.1 56.5 46.2
KDL-37BX42091.6 56.2 14.0 42.6 15.0 32.0 53.3 46.0
KDL-32NX52081.2 50.2 17.2 42.5 14.7 29.8 47.6 46.2
KDL-32BX420
KDL-32BX321
KDL-32BX32080.0 49.6 17.2 42.6 14.6 29.4 47.1 45.8
125
SU-WL100
Screen centre point
Screen centre point
SU-WL500
WARNING
 
						

							38 GB
Screw and Hook locations diagram/table
Model NameScrew location
SU-WL500Hook location
SU-WL500
KDL-40NX520
KDL-40BX420
KDL-37BX420d, g b
KDL-32NX520
KDL-32BX420
KDL-32BX321
KDL-32BX320e, g c
SU-WL100
KDL-26BX321
KDL-26BX320a
Screw location
ba
SU-WL100 SU-WL500
b a*
c
* Hook location “a” cannot be 
used for the models.
Hook location
 
						

							39 GB
Additional Information
Specifications
System
Panel System
LCD (Liquid Crystal Display) Panel
TV SystemDepending on your country/region selection
Analogue: B/G, D/K, L, I
Digital: DVB-T, DVB-C 
Colour/Video SystemAnalogue: PAL, PAL60 (only video input), SECAM, NTSC3.58, NTSC4.43 (only video input)
Digital: MPEG-2 MP@ML/HL, H.264/MPEG-4 AVC [email protected], [email protected]
Channel CoverageAnalogue: 46.25 - 855.25 MHz
Digital: VHF/UHF
Sound Output8W + 8W (except KDL-26BX321/KDL-26BX320)
5W + 5W (KDL-26BX321/KDL-26BX320)
Input/Output jacks
Aerial
75 ohm external terminal for VHF/UHF
/ AV121-pin scart connector including audio/video input, RGB input, S-Video input, and TV audio/video output.
 COMPONENT INSupported formats: 1080p, 1080i, 720p, 576p, 576i, 480p, 480i
Y: 1 Vp-p, 75 ohms, 0.3V negative sync/PB/CB: 0.7 Vp-p, 75 ohms/
PR/CR: 0.7 Vp-p, 75 ohms
 COMPONENT INAudio input (phono jacks)
HDMI IN 1, 2Video: 1080p, 1080/24p, 1080i, 720p, 576p, 576i, 480p, 480i
Audio: Two channel linear PCM
32, 44.1 and 48 kHz, 16, 20 and 24 bits, Dolby Digital
PC (see page 41)
Analogue audio (minijack) (HDMI 1 only)
AV2Video input (phono jack)
AV2Audio input (phono jacks)
 DIGITAL AUDIO 
OUT (OPTICAL)Digital optical jack (Two channel linear PCM, Dolby Digital)
 AUDIO OUTAudio output (Left/Right) (phono jacks)
PC IN PC Input (15 D-sub) (see page 41)
G: 0.7 Vp-p, 75 ohms, non Sync on Green/B: 0.7 Vp-p, 75 ohms/
R: 0.7 Vp-p, 75 ohms, H/V Sync: TTL level
 PC audio input (minijack)
iHeadphones jack
USB port
CAM (Conditional Access Module) slot
Model name KDL-40BX42037BX420
Power and others
Power Requirements
220–240 V AC, 50 Hz
Energy Efficiency ClassC
Screen Size (measured 
diagonally)Approx. 101.6 cm / 40 inches Approx. 94.0 cm / 37 inches
Power 
consumptionin “Home”/
“Standard” 
mode123 W 107 W
in “Shop”/
“Vivid” 
mode180 W 135 W
Average annual energy 
consumption*1180 kWh 156 kWh
Standby Power 
Consumption*20.25 W
Off mode Power 
Consumption0.24 W
Display Resolution1,920 dots (horizontal) × 1,080 lines (vertical)
Continued
 
						

							40 GB
Dimensions 
(w × h × d)
(Approx.)(with stand)98.8 × 63.2 × 25.0 cm 91.6 × 59.4 × 25.0 cm
(without 
stand)98.8 × 60.0 × 9.4 cm 91.6 × 56.2 × 9.1 cm
Mass
(Approx.)(with stand)15.7 kg 14.7 kg
(without 
stand)13.6 kg 12.7 kg
Supplied AccessoriesRefer to “1: Checking the accessories” on page 4.
Optional AccessoriesSee “Installing the Accessories (Wall-Mount Bracket)” on page 36.
Model name KDL-32BX42032BX321
32BX32026BX321
26BX320
Power and others
Power Requirements
220–240 V AC, 50 Hz
Energy Efficiency ClassC
Screen Size (measured 
diagonally)Approx. 80.1 cm / 32 inches Approx. 80.0 cm / 32 inches Approx. 66.1 cm / 26 inches
Power 
consumptionin “Home”/
“Standard” 
mode75.0 W 79.0 W 59.0 W
in “Shop”/
“Vivid” 
mode110 W 110 W 88 W
Average annual energy 
consumption*1110 kWh 115 kWh 86 kWh
Standby Power 
Consumption*20.25 W
Off mode Power 
Consumption0.24 W
Display Resolution1,920 dots (horizontal) × 1,080 lines 
(vertical)1,366 dots (horizontal) × 768 lines (vertical)
Dimensions 
(w × h × d)
(Approx.)(with stand)80.0 × 52.8 × 22.0 cm 80.0 × 52.8 × 22.0 cm 66.8 × 45.5 × 22.0 cm
(without 
stand)80.0 × 49.6 × 9.1 cm 80.0 × 49.6 × 9.1 cm 66.8 × 42.4 × 9.1 cm
Mass
(Approx.)(with stand)10.7 kg 10.7 kg 8.8 kg
(without 
stand)9.1 kg 9.1 kg 7.3 kg
Supplied AccessoriesRefer to “1: Checking the accessories” on page 4.
Optional AccessoriesSee “Installing the Accessories (Wall-Mount Bracket)” on page 36.
Model name KDL-40NX52032NX520
Power and others
Power Requirements
220–240 V AC, 50 Hz
Energy Efficiency ClassC
Screen Size (measured 
diagonally)Approx. 101.6 cm / 40 inches Approx. 80.1 cm / 32 inches
Power 
consumptionin “Home”/
“Standard” 
mode123 W 75.0 W
in “Shop”/
“Vivid” 
mode180 W 110 W
Average annual energy 
consumption*1180 kWh 110 kWh
Standby Power 
Consumption*20.25 W
Off mode Power 
Consumption0.24 W
Model name KDL-40BX42037BX420