Sony Kdl 22ex310 Operating Instructions
Have a look at the manual Sony Kdl 22ex310 Operating Instructions online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 980 Sony manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
4-288-091-11(2) LCD Digital Colour TV Operating Instructions KDL-42EX410 / 32EX310 / 22EX310
2 GB NOTICE FOR CUSTOMERS IN THE UNITED KINGDOM A moulded plug complying with BS1363 is fitted to this equipment for your safety and convenience. Should the fuse in the plug supplied need to be replaced with the same rating of fuse approved by ASTA or BSI to BS 1362 (i.e., marked with or ) must be used. When an alternative type of plug is used it should be fitted with the same rating of fuse, otherwise the circuit should be protected by a 10 AMP FUSE at the distribution board. If the plug supplied with this equipment has a detachable fuse cover, be sure to attach the fuse cover after you change the fuse. Never use the plug without the fuse cover. If you should lose the fuse cover, please contact your nearest Sony service station. How to replace the fuseOpen the fuse compartment with a blade screwdriver, and replace the fuse. Please refer to the illustration that actually equipped with the product. Introduction Thank you for choosing this Sony product. Before operating the TV, please read this manual thoroughly and retain it for future reference. Notice for Digital TV function • Any functions related to Digital TV ( ) will only work in countries or areas where DVB-T (MPEG-2 and H.264/MPEG-4 AVC) digital terrestrial signals are broadcast or where you have access to a compatible DVB-C (MPEG- 2 and H.264/MPEG-4 AVC) cable service. Please confirm with your local dealer if you can receive a DVB-T signal where you live or ask your cable provider if their DVB-C cable service is suitable for integrated operation with this TV. Your cable provider may charge a fee for their services, or require you to agree to its terms and conditions of business. This TV set complies with DVB-T and DVB-C specifications, but compatibility with future DVB-T digital terrestrial and DVB-C digital cable broadcasts are not guaranteed. Some Digital TV functions may not be available in some countries/areas and DVB-C cable may not operate correctly with some providers. ~ The illustrations used in this manual are of the KDL-32EX310 unless otherwise state. Trademark information is a registered trademark of the DVB Project. HDMI, the HDMI Logo, and High- Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries. Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories. DivX®, DivX Certified® and associated logos are registered trademarks of DivX, Inc. and are used under license. ABOUT DIVX VIDEO: DivX® is a digital video format created by DivX, Inc. This is an official DivX Certified device that plays DivX video. Visit www.divx.com for more information and software tools to convert your files into DivX video. ABOUT DIVX VIDEO-ON-DEMAND: This DivX Certified® device must be registered in order to play DivX Video- on-Demand (VOD) content. To generate the registration code, locate the DivX VOD section in the device setup menu. Go to vod.divx.com with this code to complete the registration process and learn more about DivX VOD. “BRAVIA” and are trademarks of Sony Corporation. Location of the identification label Labels for Model No., Production Date (month/year) and Power Supply rating (in accordance with applicable safety regulation) are located on the rear of the TV or package. FUSE FUSE The manufacturer of this product is Sony Corporation, 1-7-1 Konan Minato-ku Tokyo, 108-0075 Japan. The Authorized Representative for EMC and product safety is Sony Deutschland GmbH, Hedelfinger Strasse 61, 70327 Stuttgart, Germany. For any service or guarantee matters please refer to the addresses given in separate service or guarantee documents.
3 GB Start-up Guide 4 Safety Information...........................................................................................................10 Precautions......................................................................................................................11 Overview of the remote ..................................................................................................13 Overview of the TV buttons and indicators ..................................................................15 Watching TV Watching TV ....................................................................................................................16 Using the Digital Electronic Programme Guide (EPG) .......................................18 Using the Digital Favourite list .............................................................................19 Using Optional Equipment Connecting optional equipment ....................................................................................20 Viewing pictures from connected equipment ..............................................................22 Playing Back Photo/Music/Video via USB ....................................................................23 Using BRAVIA Sync with Control for HDMI ..................................................................26 Using MENU Functions Navigating through TV Menu .........................................................................................27 Settings ............................................................................................................................28 Additional Information Installing the Accessories (Wall-Mount Bracket) .........................................................38 Specifications ..................................................................................................................41 Troubleshooting ..............................................................................................................44 : for digital channels only • Before operating the TV, please read “Safety Information” (page 10). Retain this manual for future reference. are included within this TV’s instructions manual. Table of Contents
4 GB Start-up Guide 1: Checking the accessories Table-Top Stand (1)* Fixing screws for Table-Top Stand (M5 × 16) (3) (for KDL-42EX410/KDL-32EX310) Fixing screws for Table-Top Stand (M4 × 14) (2) (for KDL-22EX310) Assembling screws for Table-Top Stand (M6 × 14) (3) (for KDL-42EX410/KDL-32EX310) Assembling screws for Table-Top Stand (M5 × 8) (2) (for KDL-22EX310) Hexagon wrench (1) (for KDL-42EX410/KDL- 32EX310) Stand rear cover (1) (for KDL-22EX310) Remote RM-ED046 (1) Size AA batteries (2) * Assemble the Table-Top Stand with the supplied assembling screws. Refer to the supplied Table-Top Stand leaflet to assemble the stand. To insert batteries into the remote ~ • Observe the correct polarity when inserting batteries. Do not use different types of batteries together or mix old and new batteries. Dispose of batteries in an environmentally friendly way. Certain regions may regulate the disposal of batteries. Please consult your local authority. Handle the remote with care. Do not drop or step on it, or spill liquid of any kind onto it. Do not place the remote in a location near a heat source, a place subject to direct sunlight, or a damp room. 2: Attaching the stand ~ For best picture quality, do not expose the screen to direct illumination or sunlight. Follow the assembling steps required to place on a TV stand. 1Refer to the supplied Table-Top Stand leaflet for proper attachment. 2Place the TV set on the stand. Take care not to interfere with cables. For KDL-42EX410/KDL-32EX310 For KDL-22EX310 3Fix the TV to the stand according to the arrow marks that guide the screw holes using the supplied screws. For KDL-42EX410/KDL-32EX310 Push to open Guide pins
5 GB Start-up Guide For KDL-22EX310 After all the screws are tightened, attach the supplied stand rear cover to the Table-Top Stand. ~ If using an electric screwdriver, set the tightening torque at approximately 1.5 N·m (15 kgf·cm). 3: Connecting an aerial/cable/VCR/DVD recorder Stand rear cover Coaxial cable Connecting an aerial/cable only Terrestrial signal or cable Connecting an aerial/cable/VCR/DVD recorder with SCART Scart lead VCR/DVD recorderCoaxial cableCoaxial cable Terrestrial signal or cable Connecting an aerial/cable/ VCR/DVD recorder with HDMI HDMI cable Coaxial cableCoaxial cable VCR/DVD recorderTerrestrial signal or cable
6 GB 4: Preventing the TV from toppling over (KDL-42EX410/KDL- 32EX310 only) 1Install a wood screw (4 mm in diameter, not supplied) in the TV stand. 2Install a machine screw (M4×10, not supplied) into the screw hole of the TV. 3Tie the wood screw and the machine screw with a strong cord (not supplied). 5: Bundling the cables ~ Before bundling the cables, remove the cable holder from the mains lead cover (see step 1 and 2). Reuse the cable holder (see step 3) to bundle the other cables (see step 4). Do not bundle the mains lead together with other cables. * When installing on the wall, attach the cable holder under the terminals. KDL-42EX410/KDL-32EX310 KDL-22EX310
7 GB Start-up Guide6: Selecting the language, country/region and location 1Connect the TV to your mains socket (220-240V AC, 50Hz). 2Press 1 on the side of the TV. When you turn on the TV for the first time, the Language menu appears on the screen. ~ When you turn on the TV, the power indicator lights up in green. 3Press F/f/G/g to select the language displayed on the menu screens, then press . 4Follow the on-screen instructions to select the country/region in which you will operate the TV. If the country/region which you want to use on the TV does not appear in the list, select “-” instead of a country/region. 5Follow the on-screen instructions to set the PIN code. z Any PIN code can be used, except 0000. To change the PIN code later, see page 35. 6Follow the on-screen instructions to select the location type in which you will operate the TV. This option selects the initial picture mode appropriate for the typical lighting condition in these environments. In Shop mode, some settings will be periodically reset for Shop usage. 3,4,5,6 Language Select Next Select language.
8 GB 7: Auto-tuning the TV 1Press G/g to select “Start”, then press . 2Press F/f to select “Antenna” or “Cable”, then press . If you select “Cable”, the screen for selecting the scan type appears. See “To tune the TV for Cable connection” (page 8). The TV then starts searching for all available digital channels, followed by all available analogue channels. This may take some time, so do not press any buttons on the TV or remote while proceeding. If a message appears for you to confirm the aerial connection No digital or analogue channels were found. Check all the aerial/cable connections and press to start auto-tuning again. 3Programme Sorting (Only in analogue mode): Changes the order in which the analogue channels are stored on the TV. 1Press F/f to select the channel you want to move to a new position, then press g. 2Press F/f to select the new position for your channel, then press . If you do not change the order in which the analogue channels are stored on the TV, press HOME to go to next step. ~ This step will not appear if any analogue channel is found. The message “Set-up complete” will appear on the screen. Press . The TV has now tuned in all the available channels. z USB System Update You can update the TV system using USB memory. Obtain information from the website below. http://support.sony-europe.com/TV/ To tune the TV for Cable connection 1Press and F/f to select “Quick Scan” or “Full Scan”, then press . “Quick Scan” : channels are tuned according to the cable operator information within the broadcast signal. Recommended setting for “Frequency” and “Network ID” is “Auto”. This option is recommended for fast tuning when supported by your cable operator. If the “Quick Scan” does not tune, please use the “Full Scan” method below. “Full Scan” : All available channels are tuned and stored. This procedure may take some time. This option is recommended when “Quick Scan” is not supported by your cable provider. 2Press f to select “Start”. The TV starts searching for channels. Do not press any buttons on the TV or remote. ~ Some cable providers do not support “Quick Scan”. If no channels are detected using “Quick Scan”, perform “Full Scan”. StartSkip Do you want to start Auto Tuning? Auto Tuning
9 GB Start-up GuideAdjusting the viewing angle of the TV (KDL- 42EX410/KDL- 32EX310 only) This TV can be adjusted within the angles shown below. ~ When adjusting the angle, hold the stand with one hand to avoid having the stand slip or TV tip over. Detaching the Table- Top Stand from the TV ~ Do not remove the Table-Top Stand for any reason other than to wall-mount the TV. For KDL-42EX410/KDL-32EX310 For KDL-22EX310 z Be sure the TV is on the vertical position before switching on. TV set must not be powered on with LCD panel face down to avoid uneven picture uniformity. 20° 20°20° 20° Table-Top Stand Table-Top Stand
10 GB Safety Information Installation/Set-upInstall and use the TV set in accordance with the instructions below in order to avoid any risk of fire, electrical shock or damage and/or injuries. Installation The TV set should be installed near an easily accessible mains socket. Place the TV set on a stable, level surface. Only qualified service personnel should carry out wall installations. For safety reasons, it is strongly recommended that you use Sony accessories, including: – Wall-mount bracket SU-WL500 (KDL-42EX410/KDL-32EX310) SU-WL100 (KDL-22EX310) Be sure to use the screws supplied with the Wall-mount bracket when attaching the mounting hooks to the TV set. The supplied screws are designed as indicated by illustration when measured from the attaching surface of the mounting hook. The diameter and length of the screws differ depending on the Wall-mount bracket model. Use of screws other than those supplied may result in internal damage to the TV set or cause it to fall, etc. Transporting Before transporting the TV set, disconnect all cables. Two or three people are needed to transport a large TV set. When transporting the TV set by hand, hold it as shown in the illustration. Do not put stress on the LCD panel and the frame around the screen. When lifting or moving the TV set, hold it firmly from the bottom. When transporting the TV set, do not subject it to jolts or excessive vibration. When transporting the TV set for repairs or when moving, pack it using the original carton and packing material. Ventilation Never cover the ventilation holes or insert anything in the cabinet. Leave space around the TV set as shown below. It is strongly recommended that you use a Sony wall-mount bracket in order to provide adequate air-circulation. Installed on the wall Installed with stand To ensure proper ventilation and prevent the collection of dirt or dust: – Do not lay the TV set flat, install upside down, backwards, or sideways. – Do not place the TV set on a shelf, rug, bed or in a closet. – Do not cover the TV set with a cloth, such as curtains, or items such as newspapers, etc. – Do not install the TV set as shown below. Mains lead Handle the mains lead and socket as follows in order to avoid any risk of fire, electrical shock or damage and/or injuries: – Use only mains leads supplied by Sony, not other suppliers. – Insert the plug fully into the mains socket. – Operate the TV set on a 220–240 V AC supply only. – When wiring cables, be sure to unplug the mains lead for your safety and take care not to catch your feet on the cables. – Disconnect the mains lead from the mains socket before working on or moving the TV set.– Keep the mains lead away from heat sources. – Unplug the mains plug and clean it regularly. If the plug is covered with dust and it picks up moisture, its insulation may deteriorate, which could result in a fire. Notes Do not use the supplied mains lead on any other equipment. Do not pinch, bend, or twist the mains lead excessively. The core conductors may be exposed or broken. Do not modify the mains lead. Do not put anything heavy on the mains lead. Do not pull on the mains lead itself when disconnecting the mains lead. Do not connect too many appliances to the same mains socket. Do not use a poor fitting mains socket. Prohibited UsageDo not install/use the TV set in locations, environments or situations such as those listed below, or the TV set may malfunction and cause a fire, electrical shock, damage and/or injuries. Location: Outdoors (in direct sunlight), at the seashore, on a ship or other vessel, inside a vehicle, in medical institutions, unstable locations, near water, rain, moisture or smoke. If the TV is placed in the changing room of a public bath or hot spring, the TV may be damaged by airborne sulfur, etc. Cleaning:Do not spray water or detergent directly on the TV set. It may drip to the bottom of the screen or exterior parts and get inside, resulting in a malfunction. Environment: Places that are hot, humid, or excessively dusty; where insects may enter; where it might be exposed to mechanical vibration, near flammable objects (candles, etc). The TV set shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases, shall be placed on the TV. Do not place the TV in a humid or dusty space, or in a room with oily smoke or steam (near cooking tables or humidifiers). Fire, electric shock, or warping may result. Situation: Do not use when your hands are wet, with the cabinet removed, or with attachments not recommended by the manufacturer. Disconnect the TV set from mains socket and aerial during lightning storms. Do not install the TV so that it sticks out into an open space. Injury or damage from a person or object bumping into the TV may result. Mounting Hook Hook attachment on rear of TV set Screw (supplied with the Wall-mount bracket) 22TV: 6.5-10mm 32/42TV: 8-12mm KDL-22EX310KDL-42EX410/ KDL-32EX310 30 cm 10 cm 10 cm 10 cm Leave at least this space around the set. 30 cm 10 cm 10 cm6 cm Leave at least this space around the set. Air circulation is blocked. Wall Wall