Sony Kdl 22bx320 Operating Instructions

							31 GB
Additional Information
Additional Information
Installing the accessories (Wall-Mount Bracket)
To Customers:For product protection and safety reasons, Sony strongly recommends that installing of your TV be performed by 
Sony dealers or licensed contractors. Do not attempt to install it yourself.
To Sony Dealers and Contractors:Provide full attention to safety during the installation, periodic maintenance and examination of this product.
Your TV can be installed using the Wall-Mount Bracket SU-WL50B or SU-WL100 (sold separately).
 Refer to the Instructions supplied with the Wall-Mount Bracket to properly carry out the installation.
 Refer to “Detaching the stand from the TV” (page 6).
 Place the TV on the stand, when securing the Mounting Hook.
Note when installingWhen using the SU-WL50B or SU-WL100 Wall-Mount Bracket, the space between the wall and the TV will be 6 
cm. Use this space to route cables to the TV.
20151
050
20151050
SU-WL100:
(KDL-26/22BX320)
Mounting HookScrew
(+PSW
4 × 12)SU-WL50B:
(KDL-40BX420/KDL-32BX320)
Screw
(+PSW
6 × 16)
Mounting Hook
Sufficient expertise is required for installing these products, especially to determine the strength of the wall for 
withstanding the TV’s weight. Be sure to entrust the attachment of these products to the wall to Sony dealers or 
licensed contractors and pay adequate attention to safety during the installation. Sony is not liable for any damage or 
injury caused by mishandling or improper installation.
6 cm
 
						

							32 GB
Unit: mm
Unit: mm
Figures in the above table may differ slightly depending on the installation.
WARNING
The wall that the TV will be installed on should be capable of supporting a weight of at least four times that of the 
TV. Refer to “Specifications” for its weight.
TV installation dimensions table
Model name
Display 
dimensionsScreen centre 
dimensionLength for each mounting angle
Angle (0°)Angle (20°)
AB CDEFGH
KDL-26BX320668 424 117 336 147 244 403 338
KDL-22BX320551 363 107 302 122 212 338 295
Model nameDisplay dimensionsScreen centre 
dimensionLength for mounting
ABCDE
KDL-40BX420988 600 175 478 147
KDL-32BX320800 496 200 453 147
125
SU-WL100:
Screen centre point
SU-WL50B:
Screen centre point
b
bac
a c
 
						

							33 GB
Additional Information
Screw and hook locations diagram/table
Model nameScrew locationHook location
SU-WL50BSU-WL50B
KDL-40BX420 d, i b
KDL-32BX320 e, h c
SU-WL100
KDL-26BX320 a
KDL-22BX320 b
ba
Screw location - When installing the Mounting Hook on the TV.
Hook location - When installing the TV onto the Base Bracket.
SU-WL100SU-WL50B
SU-WL50B
* Hook location “a” cannot be used for 
the models in the table below.
b a*
c
b
c
b
a a
c
abccba
HookBase Bracket
 
						

							34 GB
Troubleshooting
Check whether the 1 (standby) indicator is 
flashing in red.
When it is flashing
The self-diagnosis function is activated. 
1Count how many times the 1 (standby) 
indicator flashes between each three second 
break.
For example, the indicator flashes three times, then 
there is a three second break, followed by another three 
flashes, etc.
2Press 1 on the TV to turn it off, disconnect 
the AC power cord, and inform your dealer or 
Sony service centre of how the indicator 
flashes (number of flashes).
When it is not flashing
1Check the items listed below.
2If the problem still persists, have your TV 
serviced by qualified service personnel.
No picture (screen is dark) and no sound
 Check the antenna/cable connection.
 Connect the TV to the AC power outlet, and press 1 on 
the TV.
 If the 1 (standby) indicator lights up in red, press "/1.
No picture or no menu information from equipment 
connected to the video input jack appears on the 
screen
 Press   to display the connected equipment list, then 
select the desired input.
 Check the connection between the optional equipment and 
the TV.
Double images or ghosting
 Check the antenna/cable connection, location or direction.
Only snow and noise appear on the screen
 Check if the antenna is broken or bent.
 Check if the antenna has reached the end of its serviceable 
life (three to five years in normal use, one to two years at 
the seaside).
Distorted picture (dotted lines or stripes)
 Keep the TV away from electrical noise sources such as 
cars, motorcycles, hair-dryers or optional equipment.
 When installing optional equipment, leave some space 
between the optional equipment and the TV.
 Check the antenna/cable connection.
 Keep the antenna cable away from other connecting 
cables.
Picture or sound noise when viewing a TV channel
 Adjust “AFT” (Automatic Fine Tuning) to obtain better 
picture reception (page 26).Some tiny black points and/or bright points appear 
on the screen
 The picture of a display unit is composed of pixels. Tiny 
black points and/or bright points (pixels) on the screen do 
not indicate a malfunction.
Picture contours are distorted
 Change the current setting of “Cinema Drive” to other 
settings (page 21).
No colour on programmes
 Select “Reset” (page 21).
No colour or irregular colour when viewing a signal 
from the Y, P
B/CB, PR/CR jacks of  /
 Check the connection of the Y, P
B/CB, PR/CR jacks of 
/  and check if each jacks are firmly seated in their 
respective jacks.
No picture from the connected equipment appears 
on the screen
 Turn the connected equipment on.
 Check the cable connection.
 Press   to display the connected equipment list, then 
select the desired input.
 Correctly insert the memory card or other storage device 
in the digital still camera.
 Use a digital still camera memory card or other storage 
device that has been formatted according to the instruction 
manual supplied with the digital still camera.
 Operations are not guaranteed for all USB devices. Also, 
operations differ depending on the features of the USB 
device and the video being played.
Cannot select the connected equipment on the 
menu or cannot switch the input
 Check the cable connection.
No sound, but good picture
 Press 2 +/– or % (Mute).
 Check if the “Speakers” is set to “TV Speakers” (page 23).
No sound or noisy sound
 Check if the TV system setting is appropriate (page 26).
The desired channel cannot be selected
 Switch between digital and analogue mode and select the 
desired digital/analogue channel.
Some channels are blank
 The channel is for scrambled/subscription service only. 
Subscribe to a pay TV service.
 Channel is used only for data (no picture or sound).
 Contact the broadcaster for transmission details.
Digital channels are not displayed
 Contact a local installer to find out if digital transmissions 
are provided in your area.
 Upgrade to a higher gain aerial.
Picture
Sound
Channels
 
						

							35 GB
Additional Information
The TV turns off automatically (the TV enters 
standby mode)
 Check if the “Sleep Timer” is activated (page 29).
 Check if the “Idle TV Standby” is activated (page 30).
Some input sources cannot be selected
 Select “Video Labels” and cancel “Skip” of the input 
source (page 29).
The remote does not function
 Replace the batteries.
HDMI equipment does not appear on “HDMI Device 
List”
 Check that your equipment is compatible with Control for 
HDMI.
Cannot select “Off” in “Control for HDMI”
 If you have connected any audio system that is compatible 
with Control for HDMI, you cannot select “Off” in this 
menu. To change the audio output to the TV speaker, 
select “TV Speakers” in the “Speakers” menu (page 23).
Lost password
 Select the “PIN Code” settings on the “Parental Lock” 
settings, then enter the following master password: 9999. 
This password clears your previous password and allows 
you to enter a new password (page 28).
General
 
						

							36 GB
Specifications
Design and specifications are subject to change without notice.
Model nameKDL-40BX420KDL-32BX320KDL-26BX320KDL-22BX320
System
Panel system
LCD (Liquid Crystal Display) Panel
TV systemAnalogue: B/G, I, D/K
Digital: DVB-T
Colour/video systemAnalogue: PAL, PAL60 (only video input), SECAM, NTSC3.58, NTSC4.43 (only video input)
Digital: MPEG-2 MP@ML/HL (Australian model), MPEG-2 MP@ML/HL, H.264/MPEG-4 AVC MP/
HP@L4 (New Zealand and Singaporean model)
Channel coverageAnalogue: B/G: VHF: E2–E12/UHF: E21–E69/CATV: S01–S03, S1–S41
VHF: 0–12, 5A, 9A/UHF: 28–69/CATV: S01–S03, S1–S44 (Australia and Singapore only)
VHF: 1–11/UHF: 21–69/CATV: S1–S41 (New Zealand and Singapore only)
I: UHF: B21–B69/CATV: S01–S03, S1–S41 (Australia and New Zealand only)
D/K: VHF: C1–C12, R1–R12/UHF: C13–C57, R21–R60/CATV: S01–S03, S1–S41, Z1–Z39 
(Australia and New Zealand only)
Digital: VHF/UHF (Australia and Singapore only), UHF (New Zealand only)
Sound output8 W + 8 W 5 W + 5 W
Input/Output jacks
Antenna
75 ohm external terminal for VHF/UHF
 COMPONENT IN/
 1 COMPONENT IN
Supported formats: 1080p, 1080i, 720p, 576p, 576i, 480p, 480i
Y: 1 Vp-p, 75 ohms, 0.3V negative sync/P
B/CB: 0.7 Vp-p, 75 ohms/PR/CR: 0.7 Vp-p, 75 ohms
 1 Video input (phono jack)
 COMPONENT INAudio input (phono jacks)
 2Video input (phono jacks)
 2Audio input (phono jacks)
HDMI IN 1, 2Video: 1080/24p, 1080p, 1080i, 720p, 576p, 576i, 480p, 480i
Audio: Two channel linear PCM: 32, 44.1 and 48 kHz, 16, 20 and 24 bits
 Analogue audio input (minijack) (HDMI IN 2 only)
PC Input (see page 25)
 DIGITAL AUDIO OUT 
(OPTICAL)Digital optical jack (Two channel linear PCM, Dolby Digital)
Audio output (phono jacks)
PC IN PC Input (D-sub 15-pin) (see page 25)
G: 0.7 Vp-p, 75 ohms, non Sync on Green/B: 0.7 Vp-p, 75 ohms/
R: 0.7 Vp-p, 75 ohms/HD: 1-5 Vp-p/VD: 1-5 Vp-p
PC IN PC audio input (minijack)
USB port
iHeadphones jack
Power and others
Power requirements
110-240 V AC, 50/60 Hz
Screen size 
(measured 
diagonally)inches40 32 26 22
cm (Approx.)101.6 80.0 66.1 54.8
Display resolution1,920 pixels (horizontal) 
× 1,080 lines (vertical)1,366 pixels (horizontal) × 768 lines (vertical)
Power consumptionIndicated on the rear of the TV.
Dimensions 
(Approx.) 
(w × h × d)with stand (mm)988 × 632 × 250 800 × 528 × 220 668 × 455 × 220 551 × 393 × 215
without stand (mm)988 × 600 × 94 800 × 496 × 91 668 × 424 × 91 551 × 363 × 61
Mass 
(Approx.)with stand (kg)15.7 10.7 8.8 6.2
without stand (kg)13.6 9.1 7.3 5.6
Optional 
accessoriesWall-Mount 
BracketSU-WL50B SU-WL100
 
						

							© 2011 Sony Corporation   Printed in China
Customer support
Instructions on “Installing the Wall-Mount Bracket” are 
not supplied in the form of a separate leaflet with this TV. 
These installation instructions are included within this 
TV’s instructions manual.