Sony Kdf E50a11e Operating Instructions

41 GB
Additional Information
Replacing the lamp
When the lamp becomes dark or the picture colour is not normal or the lamp indicator  on the TV set flashes, replace 
with a new lamp.
Tips• Only use the lamp XL-2400 for replacement. If you use another lamp, it may cause damage to the TV set.
• Do not remove the lamp except when replacing it.  
• Before replacing the lamp, turn off the power and disconnect the power cord.
• Replace the lamp only after it becomes cool.  The front glass of the lamp remains...

42 GB
6Pull out the lamp.
Hook a finger through the loop of the lamp handle and pull the handle upwards. Then pull the lamp straight out..
Tips
•  The lamp is very hot immediately after use. Never touch the glass portion of the lamp or the surrounding parts.
•  After the used lamp has cooled, place it into the empty box of the replacement lamp. Never put the used lamp into 
a plastic bag.
7Put the new lamp into its place.
Mount the new lamp securely. Failure to do so may cause a fire or the screen to go...

43 GB
Additional Information
9Put the outside lamp cover back in its place.
Tips
•  Consult your Sony dealer for a Sony XL-2400 replacement lamp.
•  Take great care when replacing the lamp or plugging in/unplugging the connecting cords. Rough handling may cause 
the TV to fall, damaging the TV, the TV stand and the floor. 
 

44  GB
Specifications
Display Unit
Power Requirements:
220–240 V AC, 50 Hz
Screen Size:
KDF-E50A11E: 50 inches
KDF-E42A11E: 42 inches
Display Resolution (horizontal x vertical):
1280 dots x 720 lines
Power Consumption:
175 W
Standby Power Consumption:
0,8 W
Dimensions (w × h × d):
KDF-E50A11E:  
Approx. 825 x 1180 x 395 mm
KDF-E42A11E:  
Approx. 720 x 1000 x 350 mm 
Weight:
KDF-E50A11E: 
Approx. 29.6 kg 
KDF-E42A11E: 
Approx. 25.1 kg 
Panel System
LCD (Liquid Crystal Display) Panel
TV System
Analogue:...

45  GB
Additional Information
Optional Accessories
• TV stand SU-RG11S (KDF-E42A11E)
• TV stand SU-RG11M (KDF-E50A11E)
• Lamp: XL-2400
Design and specifications are subject to change 
without notice.
PC Input Specifications
PC Input Timing
Input signal frequency:
Horizontal: 31,4 - 48,4 KHz.
Vertical: 59 - 61 Hz.
Maximum Resolution: 1024 dots x -768 lines.
Preset mode timing table for PC 
Nº Resolution Graphic mode Horizontal Vertical
(dots x lines) frequency frequency
 (kHz) (Hz)
1 640 x 480 VESA 60...

46  GB
Troubleshooting
Check whether the 1 (standby) indicator is flashing in red.
When it is flashing
The self-diagnosis function is activated. 
1Measure how long the 1 (standby) indicator flashes and stops flashing.
For example, the indicator flashes for two seconds, stops flashing for one second, and flashes for two seconds.
2Press 1 on the TV (Front side) to switch it off, disconnect the mains lead, and inform your dealer or 
Sony service centre of how the indicator flashes (duration and interval)....

No colour on programmes• Select “Reset” in the “Picture Adjustment” menu to return to the factory 
settings (page 22).
No colour or irregular colour 
when viewing a signal from the 
Y, PB/CB, PR/CR jacks of 
3• Check the connection of the Y, PB/CB, PR/CR jacks of  3.
• Make sure that the Y, P
B/CB, PR/CR jacks of  3 are firmly seated in their 
respective sockets.
Sound
Problem Cause/Remedy
No sound, but good picture• Press 2 +/– or % (Mute).
• Check that “TV Speakers” is set to “on” in the “Features”...

48  GB
Index
Numerics
0-9 buttons 8
14:9 15
4:3
 15
A
Accessories supplied 10
Aerial, connecting
 11
AFT
 32
Analogue mode ( ) button 8
ATT
 33
Audio Filter
 33
Audio Language 35
Audio Type
 35
Auto Format
 25
Auto Start Up 29
Auto Tuning
 12
analogue and digital channels
 13
analogue channels only
 30
digital channel only
 34
Auto Volume 24
AUX/VIDEO \/1 button
 8
AV Preset
 31
AV2 Output 26
B
Balance 23
Bass
 23
BBE 23
Brightness
 21
C
CA Module Set-up 36
Category list
 16
Channel
 32
Channels...

2 DE
• Zur Vermeidung eines Stromschlags darf der Netzstecker 
nicht in eine Steckdose gesteckt werden, wenn er vom 
Netzkabel getrennt wurde. Der Stecker ist nicht 
wiederverwendbar und muss entsorgt werden.
• Zur Vermeidung von Feuer- und Stromschlaggefahr darf 
das Fernsehgerät nicht dem Regen oder sonstiger 
Feuchtigkeit ausgesetzt werden.
• Im Gehäuse befinden sich Bauteile, die unter 
Hochspannung stehen. Öffnen Sie das Gehäuse nicht. 
Überlassen Sie Wartungs- und Reparaturarbeiten stets...

3 DE
Inhaltsverzeichnis
Sicherheitsinformationen............................. 4
Sicherheitsmaßnahmen .............................. 7
Die Fernbedienung...................................... 8
Bedien- und Anzeigeelemente des  
Fernsehgeräts ........................................ 9
1: Überprüfen des Zubehörs  .................... 10
2: Einsetzen von Batterien in die 
Fernbedienung ..................................... 10
3:  Anschließen von 
Antenne/Videorecorder ........................ 11
4: Sichern...