Sony ILCE-5100 Manual

function  is set to [Off], theindicator will be displayed on the product.
Power save mode  will not function  during uploading.
If  (error) is displayed,  remove the memory card  and reinsert it, or turn the product
off and then  on again. If the indicator appears again, the Eye-Fi card  may be damaged.
Wireless LAN  communication may be influenced by other communication devices. If the
communication status is poor, move  closer to the access point to be connected.
This product does not support Eye-Fi...

[Cancel] is selected as the default  setting.
[163] How  to UseChanging settingsSetup menu
Pwr Save Start Time
You can set time intervals to automatically switch to power save mode. To return to shooting
mode, perform  an operation such as pressing the shutter button halfway down.
1.  MENU   →
(Setup) →  [Pwr Save Start Time] → desired setting.
Menu item details
30 Min/5 Min /2 Min /1 Min  (default setting)/10 Sec
Note
Turn off the product when you do not use it for a long time.
The power save function...

[165] How  to UseChanging settingsSetup menu
Demo Mode
The [Demo  Mode] function  displays the movies recorded  on the memory card  automatically
(demonstration), when the camera has not been operated  for a certain  time.
Normally  select [Off].
1.  MENU  → 
(Setup)  → [Demo  Mode]  → desired setting.
Menu item details
On: 
The movie playback  demonstration starts  automatically if the product is not operated  for
about  one minute. Only protected AVCHD  movies are  played  back.
Set  the view  mode  to...

1080p: 
Outputs  signals in HD  picture  quality (1080p).
1080i :  
Outputs  signals in HD  picture  quality (1080i).
Note
If the images are  not displayed properly using the [Auto]  setting, select either  [1080i] or
[1080p] , based on which TV is to be connected.
[167] How  to Use
Changing settingsSetup menu
CTRL FOR HDMI
When connecting this product to a “BRAVIA” Sync-compatible TV using an HDMI cable (sold
separately), you can operate this product by aiming  the TV remote control  at the TV. 1.  MENU...

Displays the shooting information  of the played  back image.
Off: 
Does not display the shooting information  of the played  back image.
[169] How  to Use
Changing settingsSetup menu
USB Connection
Selects the appropriate USB connection method for each computer or USB device
connected to this product.
1.  MENU  → 
(Setup)  → [USB Connection]  → desired setting.
Menu item details
Auto (default setting):  
Establishes a Mass Storage  or MTP connection automatically, depending on the computer or
other USB...

Enhances  compatibility  by limiting of USB connection functions.1.  MENU   → 
(Setup)  → [USB LUN  Setting]  → desired setting.
Menu item details
Multi (default setting):  
Normally, use [Multi].
Single:  
Set   [USB LUN  Setting] to [Single]  only if you cannot  make  a connection.
[171] How  to Use
Changing settingsSetup menu
Language 
Selects the language to be used in the menu  items, warnings  and messages. 1.  MENU  → 
(Setup)  → [Language] → desired language.
[172] How  to Use
Changing...

[173] How  to UseChanging settingsSetup menu
Area Setting
Sets  the area  where you are  using the product.1.  MENU   → 
(Setup)  → [Area Setting]  → desired area.
[174] How  to Use
Changing settingsSetup menu
Format
Formats (initializes) the memory card. When you use a memory card  with this product for the
first time, it is recommended that you format the card  using the product for stable
performance of the memory card. Note that formatting  permanently  erases  all  data  on the
memory card, and is...

Reset: 
The product resets numbers when a file is recorded  in a new folder  and assigns numbers to
files starting with “0001.” 
(When  the recording folder  contains a file, a number one higher than  the largest  number is
assigned.)
[176] How  to Use
Changing settingsSetup menu
Select REC Folder
You can change the folder  on the memory card  where still  images and MP4 movies are  to be
recorded.
1.  MENU  → 
(Setup)  → [Select REC Folder]  → desired folder.
Note
You cannot  select the folder  when you...

[178] How  to UseChanging settingsSetup menu
Folder Name
Still images you shoot  are  recorded  in a folder  that is automatically created under the DCIM
folder  on the memory card. You can change the way folder  names  are  assigned.1.  MENU  →
(Setup)  → [Folder Name]  → desired setting.
Menu item details
Standard  Form (default setting):  
The folder  name  form is as follows: folder  number + MSDCF. 
Example: 100MSDCF
Date Form : 
The folder  name  form is as follows: folder  number + Y (the last...

Displays the recordable time of movies and the number of recordable still  images for the
inserted memory card.1.  MENU  → 
(Setup)  → [Display Media Info.] .
[181] How  to Use
Changing settingsSetup menu
Version
Displays the software version of this product, lens and Mount Adaptor. 1.  MENU  → 
(Setup)  → [Version] .
[182] How  to Use
Changing settingsSetup menu
Certification Logo (Overseas model only)
Displays some  of the certification logos for this product. 1.  MENU  →
(Setup)  → [Certification...