Home > Sony > Home Theater System > Sony Htp 36dw Operating Instructions

Sony Htp 36dw Operating Instructions

Here you can view all the pages of manual Sony Htp 36dw Operating Instructions. The Sony manuals for Home Theater System are available online for free. You can easily download all the documents as PDF.

Page 21

21GB
F:\Sony SEM HA\Data_36DW\JC06xxx_26823941136DW_GB\2682394111\GB03CON_HTP-
36DW_CEL.fmmasterpage: Right
HTP-36DW
2-682-394-11 (1)
Getting StartedThe following illustration shows how to 
connect a satellite tuner.
It is not necessary to connect all the cables. 
Connect audio and video cords according to 
the jacks of your components.Notes
 When connecting optical digital cords, insert the 
plugs straight in until they click into place.
 Do not bend or tie optical digital cords.
Tip
All the digital...

Page 22

22GB
F:\Sony SEM HA\Data_36DW\JC06xxx_26823941136DW_GB\2682394111\GB03CON_HTP-
36DW_CEL.fmmasterpage: Left
HTP-36DW
2-682-394-11 (1)
The following illustration shows how to 
connect a VCR.Note
You cannot do recording on the VCR via this 
receiver. For details, refer to the operating 
instructions supplied with the VCR.Hooking up a VCR
DVD IN
SA-CD/CDAUDIO INDVDAUDIO INVIDEO 2AUDIO IN VIDEO IN VIDEO IN
DIGITALOPTICAL
VIDEO 2
IN
VIDEO 1
IN
COAXIAL
AM
ANTENNA
SURROUNDSPEAKE
L RL R
++
RL
RLRL
AUDIO
OUT
VIDEO...

Page 23

23GB
F:\Sony SEM HA\Data_36DW\JC06xxx_26823941136DW_GB\2682394111\GB03CON_HTP-
36DW_CEL.fmmasterpage: Right
HTP-36DW
2-682-394-11 (1)
Getting Started4: Connecting the antennas
Connect the supplied AM loop antenna and 
FM wire antenna.
* The shape of the connector varies depending on 
the area code of this receiver.
Notes
 To prevent noise pickup, keep the AM loop antenna 
away from the receiver and other components.
 Be sure to fully extend the FM wire antenna.
 After connecting the FM wire antenna,...

Page 24

24GB
F:\Sony SEM HA\Data_36DW\JC06xxx_26823941136DW_GB\2682394111\GB03CON_HTP-
36DW_CEL.fmmasterpage: Left
HTP-36DW
2-682-394-11 (1)
5: Preparing the receiver 
and the remote
Connect the AC power cord to a wall outlet.
Note
Install this system so that the power cord can be 
unplugged from the wall socket immediately in the 
event of trouble.
Before using the receiver for the first time, 
initialize the receiver by performing the 
following procedure. This procedure can also 
be used to return settings...

Page 25

25GB
F:\Sony SEM HA\Data_36DW\JC06xxx_26823941136DW_GB\2682394111\GB03CON_HTP-
36DW_CEL.fmmasterpage: Right
HTP-36DW
2-682-394-11 (1)
Getting Started
Insert two R6 (size-AA) batteries in the 
RM-AAU006 remote commander.
Observe the correct polarity when installing 
batteries.
Notes
 Do not leave the remote in an extremely hot or 
humid place.
 Do not use a new battery with old ones.
 Do not mix alkaline batteries and other kinds of 
batteries.
 Do not expose the remote sensor to direct sunlight 
or...

Page 26

26GB
F:\Sony SEM HA\Data_36DW\JC06xxx_26823941136DW_GB\2682394111\GB03CON_HTP-
36DW_CEL.fmmasterpage: Left
HTP-36DW
2-682-394-11 (1)
Tips
 You can also fix the optimizer microphone to a 
tripod (not supplied) and place the tripod at your 
listening position.
 Be sure to remove any obstacles in the path 
between the optimizer microphone and the 
speakers.
 When you face the speaker towards the optimizer 
microphone, you will get a more accurate 
measurement.
Press AUTO CAL.
The following appears on the...

Page 27

27GB
F:\Sony SEM HA\Data_36DW\JC06xxx_26823941136DW_GB\2682394111\GB03CON_HTP-
36DW_CEL.fmmasterpage: Right
HTP-36DW
2-682-394-11 (1)
Getting Started
Error codes
When an error is detected during Auto 
Calibration, an error code will appear on the 
display cyclically after each measurement 
process as follows:
Error code t blank display t (error code t 
blank display)
a) t PUSH t blank display 
t ENTER
a)Appears when there are more than one error code.
To rectify the error
1Record down the error code....

Page 28

28GB
F:\Sony SEM HA\Data_36DW\JC06xxx_26823941136DW_GB\2682394111\GB03CON_HTP-
36DW_CEL.fmmasterpage: Left
HTP-36DW
2-682-394-11 (1)
c)For details, refer “Front speaker distance” 
(page 39).
d)For details, refer “Center speaker distance”
(page 39).
e)For details, refer “Surround left speaker distance” 
(page 40).
f)For details, refer “Surround right speaker 
distance” (page 40).
7: Adjusting the speaker 
levels and balance 
(TEST TONE)
You can adjust the speaker levels and balance 
while listening to the...

Page 29

29GB
F:\Sony SEM HA\Data_36DW\JC06xxx_26823941136DW_GB\2682394111\GB03CON_HTP-
36DW_CEL.fmmasterpage: Right
HTP-36DW
2-682-394-11 (1)
Playback
4Press the control button or 
control button b to enter the 
parameter.
You can also use ENTER or i on the 
receiver.
5Press control button V/v 
repeatedly to select “T. TONE 
Y”.
You can also use U or u on the receiver.
The test tone is output from each speaker 
in sequence as follows:
Front left t Center t Front right t 
Surround right t Surround left t Sub...

Page 30

30GB
F:\Sony SEM HA\Data_36DW\JC06xxx_26823941136DW_GB\2682394111\GB03CON_HTP-
36DW_CEL.fmmasterpage: Left
HTP-36DW
2-682-394-11 (1)
3Press MASTER VOL +/– to 
adjust the volume.
You can also use MASTER VOLUME on 
the receiver.
To mute the sound
Press MUTING.
The muting function will be canceled when 
you do the following.
 Press MUTING again.
 Increase the volume.
 Turn off the receiver.
To avoid damaging your 
speakers
Before you turn off the receiver, be sure to turn 
down the volume level.
To...
Start reading Sony Htp 36dw Operating Instructions

Related Manuals for Sony Htp 36dw Operating Instructions

All Sony manuals