Sony Ht Ss500 Operating Instructions

							41GB
C:\Documents and Settings\pc13\Desktop\PMRF_HT-
SS500\JC060000_2682472113SS500_GB\2682472113\GB04AMP_HT-SS500-CEL.fmmasterpage: Right
Tuner Operations
model name1[HT-SS500] 
2-682-472-11 (3)
1Press TUNER repeatedly to 
select the FM or AM band.
2Press PRESET + or PRESET – 
repeatedly to select the preset 
station you want.
Each time you press the button, you can 
select a preset station as follows:
You can also press the numeric buttons to 
select the preset station you want. Then, 
press ENTER to enter the selection.
Using the controls on the 
receiver
1Press INPUT SELECTOR repeatedly to 
select the FM or AM band.
2Press PRESET TUNING + or PRESET 
TUNING – repeatedly to select the preset 
station you want.
Using the Radio Data 
System (RDS)
(Models of area code CEL, CEK 
only)
This receiver also allows you to use RDS 
(Radio Data System), which enables radio 
stations to send additional information along 
with the regular program signal. You can 
display RDS information.
Notes
 RDS is operable only for FM stations.
 Not all FM stations provide RDS service, nor do 
they provide the same type of services. If you are 
not familiar with the RDS services in your area, 
check with your local radio stations for details.
Simply select a station on the FM 
band using direct tuning (page 38), 
automatic tuning (page 38), or 
preset tuning (page 41).
When you tune in a station that provides RDS 
services, “RDS” lights up and the program 
service name appears on the display.
Note
RDS may not work properly if the station you tuned 
to is not transmitting the RDS signal properly or if 
the signal strength is weak.
Tuning to preset stations
123
46
78
0/10ENTER
9
VIDEO 1 VIDEO 2 DVD SA-CD/CD
2CH A.F.D.
RETURN/EXIT
TV CH –
PRESET –TV CH +
PRESET + REPLAY ADVANCEc STEP C DISPLAYMOVIE MUSIC
MEMORY SHIFT
D.SKIP CLEAR ANGLE
AV
MENU TOP MENU/
GUIDE MUTING
TV VOL
MASTER VOL
FM MODEMPXAUDIO
D.TUNING
ANT
JUMPSUBTITLE DUAL MONO
TUNERMAIN MENU
>10-
F
Gg
f
ENTER
.
						

							42GB
C:\Documents and Settings\pc13\Desktop\PMRF_HT-
SS500\JC060000_2682472113SS500_GB\2682472113\GB04AMP_HT-SS500-CEL.fmmasterpage: Left
model name1[HT-SS500] 
2-682-472-11 (3)
While receiving an RDS station, 
press DISPLAY repeatedly. 
Each time you press the button, RDS 
information on the display changes cyclically 
as follows:
Program Service name t Frequency t 
Program Type indication
a) t Radio Text 
indicationb) t Current Time indication (in 
24-hour system mode) t Sound field 
currently applied
a)Type of program being broadcast (page 42).b)Text messages sent by the RDS station.
Notes
 If there is an emergency announcement by 
government authorities, “ALARM” flashes in the 
display.
 When the message consists of 9 characters or more, 
the message scrolls across the display.
 If a station does not provide a particular RDS 
service, “NO XXXX” (such as “NO TEXT”) 
appears on the display.
Displaying RDS information
Description of program types
Program type 
indicationDescription
NEWS News programs
AFFAIRS Topical programs that expand on 
current news
INFO Programs offering information on 
a wide spectrum of subjects, 
including consumer affairs and 
medical advice
SPORT Sports programs
EDUCATE Educational programs, such as 
“how-to” and advice programs
DRAMA Radio plays and serials
CULTURE Programs about national or 
regional culture, such as language 
and social concerns
SCIENCE Programs about the natural 
sciences and technology
VARIED Other types of programs such as 
celebrity interviews, panel 
games, and comedy
POP M Popular music programs
ROCK M Rock music programs
EASY M Easy Listening
LIGHT M Instrumental, vocal, and choral 
music
CLASSICS Performances of major 
orchestras, chamber music, 
opera, etc.
OTHER M Music that does not fit into any 
categories above, such as Rhythm 
& Blues and Reggae
WEATHER Weather information
FINANCE Stock market reports and trading, 
etc.
CHILDREN Programs for children
SOCIAL Programs about people and the 
things that affect them
RELIGION Programs of religious content
PHONE IN Programs where members of the 
public express their views by 
phone or in a public forum
TRAVEL Programs about travel. Not for 
announcements that are located 
by TP/TA.
LEISURE Programs on recreational 
activities such as gardening, 
fishing, cooking, etc.
JAZZ Jazz programs
COUNTRY Country music programs
NATION M Programs featuring the popular 
music of the country or region
OLDIES Programs featuring oldies music
FOLK M Folk music programs 
DOCUMENT Investigative features
NONE Any programs not defined above Program type 
indicationDescription
GB01COV_HT-SS500-CEL.book  Page 42  Thursday, June 1, 2006  10:15 AM
 
						

							43GB
C:\Documents and Settings\pc13\Desktop\PMRF_HT-
SS500\JC060000_2682472113SS500_GB\2682472113\GB05OTH_HT-SS500-CEL.fmmasterpage: Right
Other Operations/Using the Remote
model name1[HT-SS500] 
2-682-472-11 (3)
Using the Sleep Timer
You can set the receiver to turn off 
automatically at a specified time.
Press SLEEP repeatedly while the 
power is on.
Each time you press the button, the display 
changes cyclically as follows:
2-00-00 t 1-30-00 t 1-00-00 t 0-30-00 
t OFF
When Sleep Timer is being used, “SLEEP” 
lights up on the display.
Tip
To check the remaining time before the receiver 
turns off, press SLEEP. The remaining time appears 
on the display. If you press SLEEP again, the sleep 
timer will be canceled.
Changing button 
assignments
You can change the factory settings of the 
input buttons to suit the components in your 
system. For example, if you connect a DVD 
recorder to the DVD jacks on the receiver, you 
can set the DVD button on this remote to 
control the DVD recorder.
1Hold down the input button of 
which you want to change the 
assignment.
Example: Hold down DVD.
2Referring to the table below, 
press the corresponding button 
for the category you want.
Example: Press 4.
Now you can use the DVD button to 
control the DVD recorder.
Other OperationsUsing the Remote
continued
GB01COV_HT-SS500-CEL.book  Page 43  Thursday, June 1, 2006  10:15 AM
 
						

							44GB
C:\Documents and Settings\pc13\Desktop\PMRF_HT-
SS500\JC060000_2682472113SS500_GB\2682472113\GB05OTH_HT-SS500-CEL.fmmasterpage: Left
model name1[HT-SS500] 
2-682-472-11 (3)
Categories and the 
corresponding buttons
a)Sony VCRs are operated with a VTR 2 or VTR 3 
setting which correspond to 8 mm and VHS 
respectively.
b)Sony DVD recorders are operated with a DVD1 or 
DVD3 setting. For details, refer to the operating 
instructions supplied with the DVD recorders.
To clear all remote button 
assignments
Press ?/1, TEST TONE and MASTER VOL – 
at the same time.
The remote is reset to its factory settings.
Glossary
xDolby Digital
Digital audio encoding/decoding technology 
developed by Dolby Laboratories, Inc. It 
consists of front (Left/Right), center, surround 
(Left/Right) and sub woofer channels. It is a 
designated audio standard for DVD-video and 
also known as 5.1ch surround. Since surround 
information is recorded and reproduced in 
stereo, more realistic sound with fuller 
presence is delivered than with Dolby 
surround.
xDolby Pro Logic II
This technology converts 2ch stereo recorded 
audio into 5.1ch for playback. There is a 
MOVIE mode for movies and MUSIC mode 
for stereo sources such as music. Old movies 
encoded in the traditional stereo format can be 
enhanced with 5.1ch surround sound.
xDolby Surround (Dolby Pro 
Logic)
Audio processing technology developed by 
Dolby Laboratories, Inc. Center and mono 
surround information is matrixed into two 
stereo channels. When reproduced, audio is 
decoded and output in 4ch surround sound. 
This is the most common audio processing 
method for DVD-video.
xDTS Digital Surround
Digital audio encoding/decoding technology 
for theaters developed by Digital Theater 
Systems, Inc. It compresses audio less than 
Dolby Digital, delivering a higher quality 
sound reproduction. Categories Press
VCR (command mode VTR 3)
a)1
VCR (command mode VTR 2)
a)2
DVD player/DVD recorder 
(command mode DVD1)
b)3
DVD recorder 
(command mode DVD3)
b)4
CD player 5
MD deck 6
Tape deck B 7
Tuner (this receiver) 8
DSS (Digital Satellite Receiver) 9
DCS (Digital CS Tuner) 0/10
BSD (Digital BS Tuner) -/--
Additional Information
GB01COV_HT-SS500-CEL.book  Page 44  Thursday, June 1, 2006  10:15 AM
 
						

							45GB
C:\Documents and Settings\pc13\Desktop\PMRF_HT-
SS500\JC060000_2682472113SS500_GB\2682472113\GB05OTH_HT-SS500-CEL.fmmasterpage: Right
Additional Information
model name1[HT-SS500] 
2-682-472-11 (3)
xSampling frequency
To convert analog audio to digital, analog data 
should be quantified. This process is called 
sampling, and the number of times per second 
the analog data is quantified is called the 
sampling frequency. A standard music CD 
stores data quantified at 44,100 times per 
second, which is expressed as a sampling 
frequency of 44.1 kHz. Generally speaking, a 
higher sampling frequency means better sound 
quality.Precautions
On safety
Should any solid object or liquid fall into the 
cabinet, unplug the receiver and have it 
checked by qualified personnel before 
operating it any further.
On power sources
 Before operating the receiver, check that the 
operating voltage is identical with your local 
power supply. 
The operating voltage is indicated on the 
nameplate on the back of the receiver.
 The unit is not disconnected from the AC 
power source (mains) as long as it is 
connected to the wall outlet, even if the unit 
itself has been turned off.
 If you are not going to use the receiver for a 
long time, be sure to disconnect the receiver 
from the wall outlet. To disconnect the AC 
power cord, grasp the plug itself; never pull 
the cord.
 The AC power cord must be changed only at 
a qualified service shop.
On heat buildup
Although the receiver heats up during 
operation, this is not a malfunction. If you 
continuously use this receiver at a large 
volume, the cabinet temperature of the top, 
side and bottom rises considerably. To avoid 
burning yourself, do not touch the cabinet.
continued
GB01COV_HT-SS500-CEL.book  Page 45  Thursday, June 1, 2006  10:15 AM
 
						

							46GB
C:\Documents and Settings\pc13\Desktop\PMRF_HT-
SS500\JC060000_2682472113SS500_GB\2682472113\GB05OTH_HT-SS500-CEL.fmmasterpage: Left
model name1[HT-SS500] 
2-682-472-11 (3)
On placement
 Place the receiver in a location with adequate 
ventilation to prevent heat buildup and 
prolong the life of the receiver.
 Do not place the receiver near heat sources, 
or in a place subject to direct sunlight, 
excessive dust, or mechanical shock.
 Do not place anything on top of the cabinet 
that might block the ventilation holes and 
cause malfunctions.
 Do not place the receiver near equipment 
such as a TV, VCR, or tape deck. (If the 
receiver is being used in combination with a 
TV, VCR, or tape deck, and is placed too 
close to that equipment, noise may result, 
and picture quality may suffer. This is 
especially likely when using an indoor 
antenna. Therefore, we recommend using an 
outdoor antenna).
 Use caution when placing the receiver or 
speakers on surfaces that have been specially 
treated (with wax, oil, polish, etc.) as 
staining or discoloration of the surface may 
result.
On operation
Before connecting other components, be sure 
to turn off and unplug the receiver.
If you encounter color 
irregularity on a nearby TV 
screen
The front speakers, center speaker and the sub 
woofer are magnetically shielded to allow it to 
be installed near a TV set. However, color 
irregularities may still be observed on certain 
types of TV sets. As the surround speakers are 
not magnetically shielded, we recommend that 
you place the surround speakers slightly 
further away from TV set (page 11).
If color irregularity is 
observed...
Turn off the TV set, then turn it on again after 
15 to 30 minutes.
If color irregularity is observed 
again...
Place the speaker further away from the TV 
set.
If howling occurs
Reposition the speakers or turn down the 
volume on the receiver.
On cleaning
Clean the cabinet, panel, and controls with a 
soft cloth slightly moistened with a mild 
detergent solution. Do not use any type of 
abrasive pad, scouring powder, or solvent, 
such as alcohol or benzine.
If you have any questions or problems 
concerning your receiver, please consult your 
nearest Sony dealer.
GB01COV_HT-SS500-CEL.book  Page 46  Thursday, June 1, 2006  10:15 AM
 
						

							47GB
C:\Documents and Settings\pc13\Desktop\PMRF_HT-
SS500\JC060000_2682472113SS500_GB\2682472113\GB05OTH_HT-SS500-CEL.fmmasterpage: Right
Additional Information
model name1[HT-SS500] 
2-682-472-11 (3)
Troubleshooting
If you experience any of the following 
difficulties while using the receiver, use this 
troubleshooting guide to help you remedy the 
problem.
There is no sound, no matter which 
component is selected, or only a very 
low-level sound is heard.
 Check that the speakers and components 
are connected securely.
 Check that both the receiver and all 
components are turned on.
 Check that MASTER VOLUME is not set 
to “VOL MIN”.
 Press MUTING to cancel the muting 
function.
 Check that you have selected the correct 
component with the input buttons on the 
remote or INPUT SELECTOR on the 
receiver.
 The protective device on the receiver has 
been activated. Turn off the receiver, 
eliminate the short-circuit problem, and 
turn on the power again.
There is no sound from a specific 
component.
 Check that the component is connected 
correctly to the audio input jacks for that 
component.
 Check that the cord(s) used for the 
connection is (are) fully inserted into the 
jacks on both the receiver and the 
component.
 Check that you have selected the correct 
component with the input buttons on the 
remote or INPUT SELECTOR on the 
receiver.
There is no sound from one of the front 
speakers.
 Make sure you have connected to both the 
L and R jacks of an analog component, and 
not only to either the L or R jack. Use an 
audio cord (not supplied).
The left and right sounds are 
unbalanced or reversed.
 Check that the speakers and components 
are connected correctly and securely.
 Adjust the balance parameters using the 
LEVEL menu (page 27).
There is severe hum or noise.
 Check that the speakers and components 
are connected securely.
 Check that the connecting cords are away 
from a transformer or motor, and at least  
3 m away from a TV set or fluorescent 
light.
 Move your audio components away from 
the TV.
 The plugs and jacks are dirty. Wipe them 
with a cloth slightly moistened with 
alcohol.
There is no sound, or only a very low-
level sound is heard from the center/
surround speakers.
 Select a CINEMA STUDIO EX mode 
(page 35).
 Adjust the speaker level (page 19).
There is no sound from the sub woofer.
 Check that the sub woofer is connected 
correctly and securely.
The surround effect cannot be 
obtained.
 Make sure you have selected a sound field 
with MOVIE or MUSIC button.
 Sound fields do not function for signals 
with a sampling frequency of more than 
48 kHz.
Dolby Digital or DTS multi channel 
sound is not reproduced.
 Check that the DVD, etc. you are playing 
is recorded in Dolby Digital or DTS 
format.
 When connecting the DVD player, etc., to 
the digital input jacks of this receiver, 
check the audio setting (the settings for the 
audio output) of the connected component.
continued
GB01COV_HT-SS500-CEL.book  Page 47  Thursday, June 1, 2006  10:15 AM
 
						

							48GB
C:\Documents and Settings\pc13\Desktop\PMRF_HT-
SS500\JC060000_2682472113SS500_GB\2682472113\GB05OTH_HT-SS500-CEL.fmmasterpage: Left
model name1[HT-SS500] 
2-682-472-11 (3)
The FM reception is poor.
 Use a 75-ohm coaxial cable (not supplied) 
to connect the receiver to an outdoor FM 
antenna as shown below. If you connect 
the receiver to an outdoor antenna, ground 
it against lightning. To prevent a gas 
explosion, do not connect the ground wire 
to a gas pipe.
Radio stations cannot be tuned in.
 Check that the antennas are connected 
securely. Adjust the antennas and connect 
an external antenna, if necessary.
 The signal strength of the stations is too 
weak (when tuning in with automatic 
tuning). Use direct tuning (page 38).
 Make sure you set the tuning interval 
correctly (when tuning in AM stations 
with direct tuning).
 No stations have been preset or the preset 
stations have been cleared (when tuning by 
scanning preset stations). Preset the 
stations (page 40).
RDS does not work.a)
 Make sure that you are tuned to an FM 
RDS station.
 Select a stronger FM station.
The RDS information that you want 
does not appear.a)
 Contact the radio station and find out 
whether they actually provide the service 
in question. If so, the service may be 
temporarily out of order.
There is no picture or an unclear 
picture appears on the TV screen or 
monitor.
 Make sure you have connected the video 
output of your video component to the TV.
 Move your audio components away from 
the TV.
Remote control
The remote does not function.
 For receiver operation, you can only use 
the DISPLAY button when the TUNER 
input is selected.
a)
 Point the remote at the remote sensor on 
the receiver.
 Remove any obstacles in the path between 
the remote and the receiver.
 Replace all the batteries in the remote with 
new ones, if they are weak.
 Make sure you select the correct input on 
the remote.
 The SHIFT button on the remote is not 
available for receiver operation.
 a)Models of area code CEL, CEK only.
Error messages
If there is a malfunction, the display shows a 
message. You can check the condition of the 
system by the message. Refer to the following 
table to solve the problem. If any problem 
persists, consult your nearest Sony dealer.
PROTECT
Irregular current is output from the 
speakers. The receiver will automatically 
turn off after a few seconds. Check the 
speaker connection and turn on the power 
again.
U
ANTENNA
AM
Receiver
To groundGround wire 
(not supplied)  Outdoor FM antenna 
GB01COV_HT-SS500-CEL.book  Page 48  Thursday, June 1, 2006  10:15 AM
 
						

							49GB
C:\Documents and Settings\pc13\Desktop\PMRF_HT-
SS500\JC060000_2682472113SS500_GB\2682472113\GB05OTH_HT-SS500-CEL.fmmasterpage: Right
Additional Information
model name1[HT-SS500] 
2-682-472-11 (3)
If you are unable to remedy the 
problem using the 
troubleshooting guide
Clearing the receiver’s memory may remedy 
the problem (page 18). However, note that all 
memorized settings will be reset to their 
factory settings and you will have to readjust 
all settings on the receiver.
If the problem persist
Consult your nearest Sony dealer.
Reference sections for clearing 
the receiver’s memory
Specifications
Amplifier sectionPower Output1)
Stereo mode (rated) 30 W + 30 W 
(6 ohms at 1 kHz, 0.7%)
Music power output 
FRONT
2): 63.3 W/ch
CENTER2): 63.3 W
SUR2): 63.3 W/ch
SUBWOOFER2): 63.5 W
1)Measured under the following conditions:
2)Depending on the sound field settings and the 
source, there may be no sound output.
Inputs (Analog)
Inputs (Digital)
Reproduction frequency range:
28 – 20,000 Hz
Tone
FM tuner sectionTuning range 87.5 - 108.0 MHz
Antenna FM wire antenna
Antenna terminals 75 ohms, unbalanced
Intermediate frequency
10.7 MHz
To  c l e a r S e e
All memorized settings page 18
Customized sound fields page 37Area code Power requirements
CEL, CEK 230 V AC, 50 Hz
SA-CD/CD, 
VIDEO 1, 2Sensitivity: 900 mV 
Impedance: 50 kohms
DVD (Coaxial) Sensitivity: – 
Impedance: 75 ohms
SA-CD/CD (Optical) Sensitivity:  – 
Impedance: –
Gain levels ±6 dB, 1 dB step
continued
GB01COV_HT-SS500-CEL.book  Page 49  Thursday, June 1, 2006  10:15 AM
 
						

							50GB
C:\Documents and Settings\pc13\Desktop\PMRF_HT-
SS500\JC060000_2682472113SS500_GB\2682472113\GB05OTH_HT-SS500-CEL.fmmasterpage: Left
model name1[HT-SS500] 
2-682-472-11 (3)
AM tuner sectionTuning range
Models of area code CEL, CEK
With 9-kHz tuning scale:
531 – 1,602 kHz
Antenna Loop antenna
Intermediate frequency 
450 kHz
GeneralPower requirements
Power consumption
Power consumption (during standby mode)
0.2 W
Dimensions (w/h/d) (Approx.)
430 × 64 × 352 mm  
including projecting parts 
and controls
Mass (Approx.) 5.7 kg
Speaker section
Front speakers (SS-MSP700)
Center speaker (SS-CNP700)
Surround speakers (SS-SRP700)
Front/center speakers  Full range, magnetically 
shielded
Surround speakers Full range
Speaker units 70 mm cone type
Enclosure type Close type
Rated Impedance 6 ohms
Dimension (w/h/d) (Approx.)
Front/surround speakers 91 × 96 × 100 mm
Center speaker 155 × 96 × 100 mm
Mass (Approx.)
Front speakers 0.6 kg
Center speaker 0.7 kg
Surround speakers 0.5 kg
Sub woofer (SS-WP700) 
Speaker system  Magnetically shielded
Speaker unit  200 mm cone type
Enclosure type  Bass reflex
Rated Impedance 6 ohms
Dimensions (w/h/d) (Approx.)
270 × 330 × 306 mm
including front panel
Mass (Approx.) 4.7 kg
Supplied accessoriesFM wire antenna (1)
AM loop antenna (1)
Remote commander RM-AAU002 (1)
R6 (size-AA) batteries (2)
Coaxial digital cord (1)
Foot pads
 Speakers (20)
 Sub woofer (4)
Speakers
 Front speakers (2)
 Center speaker (1)
 Surround speakers (2)
 Sub woofer (1)
Design and specifications are subject to 
change without notice.
Area code Power requirements
CEL, CEK 230 V AC, 50/60 Hz
Area code Power consumption
CEL, CEK 180 W
For details on the area code of the 
component you are using, see page 2.
GB01COV_HT-SS500-CEL.book  Page 50  Thursday, June 1, 2006  10:15 AM