Sony Ht Ss2300 Operating Instructions

51GB
 
 
 
 
Tuner Operations
4Press the numeric buttons to 
select a preset number.
You can also press the PRESET + or 
PRESET – to select a preset number.
If “MEMORY” goes out before you 
select the preset number, start again from 
step 3.
5Press ENTER.
The station is stored as the selected preset 
number. 
If “MEMORY” goes out before you press 
ENTER, start again from step 3.
6Repeat steps 1 to 5 to preset 
another station.
1Press TUNER repeatedly to 
select the FM or AM band.
2Press PRESET + or...

52GB
Using the Radio Data 
System (RDS)
(Models of area code CEL, CEK 
only) 
This receiver also allows you to use RDS 
(Radio Data System), which enables radio 
stations to send additional information along 
with the regular program signal. You can 
display RDS information.
Notes
 RDS is operable only for FM stations.
 Not all FM stations provide RDS service, nor do 
they provide the same type of services. If you are 
not familiar with the RDS services in your area, 
check with your local radio stations...

53GB
 
 
 
 
Tuner Operations
Program type 
indicationDescription
VARIED Other types of programs such as 
celebrity interviews, panel 
games, and comedy
POP M Popular music programs
ROCK M Rock music programs
EASY M Easy Listening
LIGHT M Instrumental, vocal, and choral 
music
CLASSICS Performances of major 
orchestras, chamber music, 
opera, etc.
OTHER M Music that does not fit into any 
categories above, such as Rhythm 
& Blues and Reggae
WEATHER Weather information
FINANCE Stock market reports and...

54GB
Using the Control for 
HDMI function for 
“BRAVIA” Sync
To use “BRAVIA” Sync, set the Control for 
HDMI function as explained below.
By connecting Sony components that are 
compatible with the Control for HDMI 
function with an HDMI cable (not supplied), 
operation is simplified as follows:
 One-Touch Play: When you play back a 
component such as a DVD/Blu-ray disc 
player, the receiver and the TV are turned on 
automatically and switched to the 
appropriate HDMI input.
 System Audio Control: While...

55GB
 
 
 
 
 
Control for HDMI
Before connecting the cords, be sure to 
disconnect the AC power cord.
To enjoy TV multi channel 
surround sound broadcasting
You can listen to TV multi channel surround 
sound broadcasting from the speakers 
connected to the receiver.
Connect the OPTICAL output jack of the TV 
to the TV OPT IN jack of the receiver.
a)Connect at least one of the audio cords (B or C).
Connecting a TV and other 
components
OPT INVIDEO 2COAX INDV D
DVD INSAT INBD INOUT
ANTENNAAUDIO INVIDEO...

56GB
Preparing Control for 
HDMI function
This receiver supports the Control for HDMI- 
Easy Setting function.
This function is only available for certain 
types of TV. When you perform the Control 
for HDMI-Easy Setting from the TV, the 
Control for HDMI setting on this receiver will 
automatically change accordingly. 
During Control for HDMI-Easy Setting 
operation, “CONTROL”, “SCAN FOR” and 
“HDMI” appear sequentially in the display. 
This receiver will automatically change the 
input to HDMI input....

57GB
 
 
 
 
 
Control for HDMI
1Press AMP MENU.
“1-LEVEL” appears on the display.
2Press V/v repeatedly to select 
“6-VIDEO”.
3Press  or b to enter the 
menu.
4Press V/v repeatedly to select 
“CONTROL FOR HDMI”.
“CONTROL FOR HDMI” scrolls across 
the display, then “CONTROL” appears.
5Press  or b to enter the 
parameter.
6Press V/v repeatedly to select 
“CTRL ON”.
Control for HDMI function is activated.
Watching a DVD  
(One-Touch Play)
You can enjoy sound and image from the 
components connected to the...

58GB
Enjoying the TV sound 
from the speakers 
connected to the receiver 
(System Audio Control)
You can enjoy the TV sound from the speakers 
connected to the receiver by a simple 
operation. 
You can operate System Audio Control 
function using the TV menu. For details, refer 
to the operating instructions of the TV.
When System Audio Control function is 
turned on, the receiver will turns on and 
switches to the appropriate input 
automatically.
TV sound is output from the speakers 
connected to the...

59GB
 
 
 
 
 
Control for HDMI
Turning off the receiver 
with the TV  
(System Power Off)
When you turn the TV off by using the 
POWER button on the TV’s remote, the 
receiver and the connected components turn 
off automatically.
You can also use the receiver’s remote to turn 
off the TV.
Press TV and TV ?/1 at the same 
time.
The TV, receiver and the components 
connected via HDMI are turned off.Notes
 Set the TV Standby Synchro to “ON” before using 
the System Power Off function. For details, refer to...

60GB
Switching between 
digital and analog audio 
(IN MODE)
You can select the audio input mode setting 
when you connect components to both digital 
and analog audio input jacks on the receiver. 
1Press AMP MENU.
“1-LEVEL” appears on the display.
2Press V/v repeatedly to select 
“5-AUDIO”.
3Press  or b to enter the 
menu.
4Press V/v repeatedly to select 
“IN MODE”.
5Press  or b to enter the 
parameter.
6Press V/v repeatedly to select 
the audio input you want.
Audio input modes
xAUTO
Gives priority to...