Sony Ht Sl55 Operating Instructions
Have a look at the manual Sony Ht Sl55 Operating Instructions online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 980 Sony manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
41GB Additional Information HT-SL55 4-247-583-12(1) GB Speaker Section For HT-SL55 only •SS-MSP55 for front and surround speakers •SS-CNP55 for center speaker For HT-SL50 and HT-SL40 only •SS-MSP50 for front and surround speakers •SS-CNP50 for center speaker Speaker systemFull range, magnetically shielded Speaker units SS-MSP55 80 mm, cone type SS-CNP55 55 mm, cone type SS-MSP50/SS-CNP50 55 × 110 mm, cone type Enclosure typeBass reflex Rated Impedance8 ohms Power handling capacity (Maximum input power) SS-MSP55/SS-CNP55 60 W SS-MSP50/SS-CNP50 35 W Sensitivity level SS-MSP55/SS-CNP55 84 dB (1 W, 1 m) SS-MSP50/SS-CNP50 86 dB (1 W, 1 m) Frequency range160 Hz – 20,000 Hz Dimensions (w/h/d) SS-MSP55 Approx. 105 × 153 × 128 mm SS-MSP50 Approx. 76 × 162 × 106 mm SS-CNP55 Approx. 200 × 79 × 131 mm SS-CNP50 Approx. 280 × 82 × 106 mm Mass SS-MSP55 Approx. 1.2 kg SS-MSP50 Approx. 0.8 kg SS-CNP55 Approx. 0.8 kg SS-CNP50 Approx. 1.0 kg AM tuner section Tuning range Models of area code CEL, CEK, SP With 9-kHz tuning scale: 531 – 1602 kHz AntennaLoop antenna Intermediate frequency 450 kHz Usable sensitivity50 dB/m (at 999 kHz) S/N54 dB (at 50 mV/m) Harmonic distortion0.5% (50 mV/m, 400 Hz) SelectivityAt 9 kHz: 35 dB General Power requirements Area code Power requirements CEL, CEK 230 V AC, 50/60 Hz SP 220 – 230 V AC, 50/60 Hz Power consumption Area code Power consumption CEL, CEK 130 W SP 105 W Power consumption (during standby mode) 0.3 W Dimensions (w/h/d) STR-KSL50: 430 × 56 × 290 mm STR-KSL40: 430 × 56 × 288 mm including projecting parts and controls Mass (Approx.)4.5 kg continued GB10ADD_HT-SL55.p6528/4/2003, 11:58 AM 41
42GB HT-SL55 4-247-583-12(1) GB Sub woofer •SA-WMSP50 for HT-SL55 and HT-SL50 only •SA-WMSP40 for HT-SL40 only Speaker systemActive subwoofer, magnetically shielded Speaker unitWoofer: 20 cm cone type Enclosure typeAcoustically Loaded Bass Reflex Continuous RMS power output (6 ohms, 20 – 250 Hz) SA-WMSP50 100 W SA-WMSP40 75 W Reproduction frequency range 28 Hz – 200 Hz High frequency cut-off frequency 150 Hz InputLINE IN (input pin jack) Power requirements Area code Power requirements CEL, CEK, SP 230 V AC, 50/60 Hz Power consumption SA-WMSP50 100 W SA-WMSP40 75 W Dimensions (w/h/d)Approx. 270 × 325 × 398 mm including front panel Mass SA-WMSP50 Approx. 10.0 kg SA-WMSP40 Approx. 9.0 kg Supplied accessories FM wire antenna (1) AM loop antenna (1) Remote commander RM-U40 (1) R6 (size-AA) batteries (2) Speakers •Front speakers (2) •Center speaker (1) •Surround speakers (2) •Sub woofer (1) Speaker cords (long) (2) Speaker cords (short) (3) Speaker foot pads (20) Sub woofer foot pads (4) Coaxial digital cord (1) Monaural audio cord (1) Colour label for speakers (5) For details on the area code of the component you are using, see page 4. Design and specifications are subject to change without notice.Specifications (continued) GB10ADD_HT-SL55.p6528/4/2003, 11:58 AM 42
43GB Additional Information HT-SL55 4-247-583-12(1) GB Tables of settings using MAIN MENU button You can make various settings using the MAIN MENU button and V/v/B/b button. The tables below show each of the settings that these buttons can make. Press MAIN MENU Press V or v to select Press B or b to select Page repeatedly to select L R BAL. L/R XX L +8 to R +8 (1 steps) 24 CTR XXX dB–10 dB to +10 dB (1 dB steps) SUR.L. XXX dB–10 dB to +10 dB (1 dB steps) SUR.R. XXX dB–10 dB to +10 dB (1 dB steps) S.W. XXX dB–10 dB to +10 dB (1 dB steps) D. RANGE COMP. XXX OFF, STD, MAX EFCT. XXX depends on the sound field (MIN, STD, MAX) BASS XX dB–6 dB to +6 dB (1 dB steps) 25 TREB. XX dB–6 dB to +6 dB (1 dB steps) SW (SUB WOOFER) S.W. XXX* YES, NO 15 L R (FRONT) XXXXX* LARGE, SMALL C (CENTER) XXXXX* LARGE, SMALL, NO SL SR (SURROUND) XXXXX* LARGE, SMALL, NO L R DIST. X.X m between 1.0 meter to 7.0 meters (0.1 meter steps) C DIST. X.X m between L R DIST. and 1.5 meters (0.1 meter steps) SL SR DIST. X.X m between L R DIST. and 4.5 meters (0.1 meter steps) SL SR PL. XXXX LOW, HIGH DVD-XXXX AUTO, OPT, COAX, ANLG 30 TV-XXXX AUTO, OPT, ANLG DEC. XXXX AUTO, PCM * Only when you select “NORM. SP.”. GB10ADD_HT-SL55.p6528/4/2003, 11:59 AM 43
44GB HT-SL55 4-247-583-12(1) GB Sony Corporation Printed in Malaysia Adjustable parameters for each sound field The adjusted BASS and TREB. parameters are applied to all sound field. 1) “PCM 96K” appears as a sound field only for the digital input signals. In this case, other sound fields are unavailable. 2)These parameters may not operate depending on the source or adjustments. For details, see each item in “Adjusting the level parameters” (page 24). 3)When these sound fields are selected, there is no sound output from the sub woofer if the front speaker size is set to “LARGE”. However, sound will be output from the sub woofer if the digital input signal contains LFE signals. < TONE > BASS TREB. 2CH ST.zz A.F.D. AUTOzz DOLBY PLzz PLII MOVzz PLII MUSzz C.ST.EX Azz C.ST.EX Bzz C.ST.EX Czz HALLzz JAZZzz CONCERTzz PCM 96K1) The adjusted LEVEL parameters are applied to all the sound fields except for EFCT. parameter. For EFCT. parameter the settings are stored individually for each sound field. < LEVEL > FRONT CENTER SUR.L. SUR.R. S.W. D.RANGE EFCT. BAL LEVEL LEVEL LEVEL LEVEL COMP2)LEVEL 2CH ST.zz A.F.D. AUTOzzzzz z DOLBY PLzzzzz z PLII MOVzzzzz z PLII MUSzzzzz z C.ST.EX Azzzzz zz C.ST.EX Bzzzzz zz C.ST.EX Czzzzz zz HALLzzzz z3)zz JAZZzzzz z3)zz CONCERTzzzz z3)zz PCM 96K1)z GB10ADD_HT-SL55.p6528/4/2003, 11:59 AM 44