Sony Ht Sl500 Operating Instructions

							Other Operations/Operations Using the Remote RM-U700
masterpage:Right lename[E:\SEM_Janet\Data_HT-SL800_REV\J9040472_4254753121SL800GB\4254753121\GB08REM_HTSL800-CEL.fm]
 model name1[STR-SL800]
[4-254-753-12(1)]
31GB
You can use the remote RM-U700 to operate the 
components in your system.
Inserting batteries into the 
remote
Insert R6 (size-AA) batteries with the + and –
properly oriented in the battery compartment. 
When using the remote, point it at the remote 
sensor   on the receiver.
Tip
Under normal conditions, the batteries should last for 
about 6 months. When the remote no longer operates 
the receiver, replace all batteries with new ones.
Notes
 Do not leave the remote in an extremely hot or humid 
place.
 Do not use a new battery with an old one.
 Do not expose the remote sensor to direct sunlight or 
lighting apparatuses. Doing so may cause a 
malfunction.
 If you don’t use the remote for an extended period of 
time, remove the batteries to avoid possible damage 
from battery leakage and corrosion.
The tables below show the settings of each 
button.
Operations Using the Remote RM-U700
Before you use your 
remote
Remote button 
description
Remote 
ButtonOperations Function
A.F.D. whReceiver Selects A.F.D. AUTO.
ALT wsRemote When ALT button lights 
up, it changes the remote 
key function to activate 
those buttons with orange 
printing.
HX mM .>
-
VIDEO DVDSYSTEM STANDBYSLEEP
TV ?/1AV ?/1
SAT TV
AUXTUNER
;PL/PL A.F.D.
TOP MENU/
GUIDEAV MENUMUTING
MASTER
VOL
DISPLAY
TV VOL TV CH
WIDETEST
TONE
TV/
VIDEOMAIN
MENU RETURN/EXIT
TUNINGDISC ALT
ANTCLEARSEARCH MODE
DUAL
MONO
FM MODE
123
456
789
0/10 >10/11 ENTER/12D.TUNING
MEMORY SHIFTSOUND
FIELD
TIMESWAP JUMPPRESET/
CH/D.SKIP AUDIOANGLE
SUBTITLE
x
?/1
O
ENTER
f F
G
g
1
e; ea
2
wl
wh
wg
wf
wd
ws
wa
9
w;
ql
qkqa q; 3
6
7
qs
qd
8
qg qh qj
qf
5 4
wj wk
continued
GB01COV_HT-SL800-CEL.book  Page 31  Friday, June 18, 2004  5:04 PM
 
						

							masterpage:Left lename[E:\SEM_Janet\Data_HT-SL800_REV\J9040472_4254753121SL800GB\4254753121\GB08REM_HTSL800-CEL.fm]
 model name1[STR-SL800]
 [4-254-753-12(1)]
32GB
Remote 
ButtonOperations Function
ANGLE 6DVD  player Selects viewing angle or 
changes the angles.
ANT 8VCR Selects output signal 
from the antenna 
terminal: TV signal or 
VCR program.
AUDIO 6TV/VCR/
DVD playerChanges the sound to 
Multiplex or Bilingual 
or Multi Channel TV 
Sound.
AUX 4Receiver To listen to an audio 
equipment.
AV MENU 
qaVCR/
satellite tuner/
DVD playerDisplays menu.
AV ?/1 
e;TV/VCR/
CD player/
DVD playerTurns the audio and 
video components on or 
off.
CLEAR 8DVD player Press if you make a 
mistake when you press 
the numeric button or 
press to return to 
continuous play etc.
DISC waCD player Selects a disc directly 
(multi-disc changer 
only).
DISPLAY 
qaTV/VCR/
DVD playerSelects information 
displayed on the TV 
screen.
D.TUNING 
6Receiver Enters direct tuning 
mode.
DUAL 
MONO 6Receiver Selects the language 
you want during digital 
broadcast.
DVD 2Receiver To watch DVD.
Remote 
ButtonOperations Function
ENTER qaReceiver/
VCR/
satellite tuner/
DVD playerEnters the selection.
ENTER/12 
wdTV/VCR/
satellite tunerEnters the selection.
FM MODE 
6Receiver Selects FM monaural or 
stereo reception.
JUMP 6TV Toggles between the 
previous and the current 
channels.
MAIN 
MENU qjReceiver Selects the menu of the 
receiver.
MASTER 
VOL +/– 
qkReceiver Adjusts the master 
volume of the receiver.
MEMORY 
7Receiver Stores the radio stations.
MUTING 
qlReceiver Mutes the sound from 
the receiver.
PRESET/ Receiver Selects preset stations.
CH/D.SKIP 
+/– wfTV/VCR/
satellite tunerSelects preset channel.
CD player/
DVD playerSkips discs (multi-disc 
changer only).
RETURN/
EXIT/O DVD player Returns to the previous 
menu or exits the menu.
qaSatellite tuner Exits the menu.
SAT wkReceiver To watch satellite tuner.
SEARCH 
MODE waDVD  player Selects searching mode. 
Press to select the unit 
for search (track, index, 
etc.)
GB01COV_HT-SL800-CEL.book  Page 32  Friday, June 18, 2004  5:04 PM
 
						

							Operations Using the Remote RM-U700
masterpage:Right lename[E:\SEM_Janet\Data_HT-SL800_REV\J9040472_4254753121SL800GB\4254753121\GB08REM_HTSL800-CEL.fm]
 model name1[STR-SL800]
[4-254-753-12(1)]
33GB
* Only for Sony TVs with the picture-in-picture 
function.
Remote 
ButtonOperations Function
SHIFT wdReceiver Selects a memory 
page for presetting 
radio stations or 
tuning to preset 
stations.
SLEEP eaReceiver Activates the sleep 
function and the 
duration which the 
receiver turns off 
automatically.
SOUND 
FIELD +/–
wgReceiver Selects sound fields.
SUBTITLE 
6DVD player Changes the subtitles.
SWAP* 6TV Swaps the small and 
large picture.
SYSTEM 
STANDBY 
(Press AV 
?/1 e; and 
?/1 ea at the 
same time) Receiver/
TV/VCR/
satellite tuner/
CD player/
DVD playerTurns off the receiver 
and other Sony audio/
video components.
TEST TONE 
qgReceiver Outputs test tone.
TIME 6CD player/
DVD playerShows the time or 
displays the playing 
time of disc, etc.
TOP MENU/ DVD player Displays DVD title.
GUIDE qaSatellite tuner Displays guide menu.
TUNER wjReceiver To listen to radio 
programs.
TUNING
–/+ 8Receiver Scans radio stations.
TV wlReceiver To watch TV 
programs.
TV CH +/– 
qdTV Selects preset TV 
channels.
Remote 
ButtonOperations Function
TV/VIDEO 
qhTV Selects input signal: 
TV input or video 
input.
TV VOL 
+/– qsTV Adjusts the volume of 
the TV.
TV ?/1 1TV Turns the TV on or off.
VIDEO 3Receiver To watch VCR.
WIDE qfTV Selects the wide 
picture mode.
1-9 6 and
0/10 7Receiver Use with SHIFT to 
preset radio station or 
tuning to preset 
stations and with 
D.TUNING for direct 
tuning.
CD player Selects track numbers. 
0/10 selects track 10.
TV/VCR/
satellite tunerSelects channel 
numbers.
>10/11 7CD player Selects track numbers 
over 10.
-/-- waTV Selects the channel 
entry mode, either one 
or two digit.
?/1 eaReceiver Turns the receiver on 
or off.
;PL/PLII 
5Receiver Selects DOLBY PL, 
PLII MOV or PLII 
MUS.
V/v qaReceiver Selects a menu item.
B/b qaReceiver Adjusts or changes the 
setting.
V/v/B/b qaVCR/
satellite tuner/
DVD playerSelects a menu item. 
Press to enter the 
selection.
continued
GB01COV_HT-SL800-CEL.book  Page 33  Friday, June 18, 2004  5:04 PM
 
						

							masterpage:Left lename[E:\SEM_Janet\Data_HT-SL800_REV\J9040472_4254753121SL800GB\4254753121\GB08REM_HTSL800-CEL.fm]
 model name1[STR-SL800]
 [4-254-753-12(1)]
34GB
Notes
 The AUX button on the remote is not available for 
receiver operation.
 When you press the input buttons (VIDEO, DVD), 
the input mode of the TV might not switch to the 
corresponding input mode that you want. In this case, 
press the TV/VIDEO button to switch the input mode 
of the TV.
 To activate the buttons with orange printing, press 
ALT first before pressing the buttons.
 Some functions explained in this section may not 
work depending on the model.
 The above explanation is intended to serve as an 
example only. Therefore, depending on the 
component the above operation may not be possible 
or may operate differently than described.
 The DISPLAY button on the remote is available for 
TUNER input only (Models of area code CEL, CEK 
only).
If the factory settings of the input buttons do not 
match your system components, you can change 
them. For example, if you have a CD player and 
you do not have a DVD player, you can assign 
the DVD button to your CD player.
1Hold down the input button whose 
input you want to change (for example, 
DVD).
2Press the corresponding button of the 
component you want to assign to the 
input button (for example, 1 – CD 
player).
The following buttons are assigned to select 
the input:
*Sony VCRs are operated with a VTR 2 or 3 
setting. These correspond to 8mm and VHS 
respectively.
Now you can use the DVD button to control 
the CD player.
To reset a button to its factory 
setting
Repeat the above procedure.
To reset all the input buttons to 
their factory setting
Press ?/1, AV ?/1 and MASTER VOL – at the 
same time.
Remote 
ButtonOperations Function
./> 
7VCR/
CD player/
DVD playerSkips tracks.
m/M 
8CD player/
DVD playerSearches tracks in the 
forward or backward 
direction.
VCR Fastforwards or rewinds.
H 9VCR/
CD player/
DVD playerStarts playblack.
X q;VCR/
CD player/
DVD playerPauses playblack or 
record. (Also starts 
recording with 
components in recording 
standby.)
x w;VCR/
CD player/
DVD playerStops playback.
Changing the factory 
setting of an input button
To operate Press
CD player 1
VCR (command mode VTR 2*) 2
VCR (command mode VTR 3*) 3
DVD player 4
TV 5
DSS (Digital Satellite Receiver) 6
Tuner (this receiver) 7
DCS (Digital CS Tuner) 8
BSD (Digital BS Tuner) 9
Tuner (Component tuner) 0/10
GB01COV_HT-SL800-CEL.book  Page 34  Friday, June 18, 2004  5:04 PM
 
						

							Additional Information
masterpage:Right lename[E:\SEM_Janet\Data_HT-SL800_REV\J9040472_4254753121SL800GB\4254753121\GB09ADD_HT-SL800-CEL.fm]
35GB
 model name1[HT-SL800]
[4-254-753-12(1)] On safety
Should any solid object or liquid fall into the cabinet, 
unplug the receiver and have it checked by qualified 
personnel before operating it any further.
On power sources
 Before operating the receiver, check that the 
operating voltage is identical with your local power 
supply. The operating voltage is indicated on the 
nameplate at the rear of the receiver.
 The receiver is not disconnected from the AC power 
source (mains) as long as it is connected to the wall 
outlet, even if the receiver itself has been turned off.
 If you are not going to use the receiver for a long 
time, be sure to disconnect the receiver from the wall 
outlet. To disconnect the AC power cord, grasp the 
plug itself; never pull the cord.
 AC power cord must be changed only at the qualified 
service shop.
On heat buildup
Although the receiver heats up during operation, this is 
not a malfunction. If you continuously use this receiver 
at a large volume, the cabinet temperature of the top, 
side and bottom rises considerably. To avoid burning 
yourself, do not touch the cabinet.
On placement
 Place the receiver in a location with adequate 
ventilation to prevent heat buildup and prolong the 
life of the receiver.
 Do not place the receiver near heat sources, or in a 
place subject to direct sunlight, excessive dust or 
mechanical shock.
 Do not place anything on top of the cabinet that 
might block the ventilation holes and cause 
malfunctions.
 Use caution when placing the receiver or speakers on 
surfaces that have been specially treated (with wax, 
oil, polish, etc.) as staining or discoloration of the 
surface may result.
On operation
Before connecting other components, be sure to turn 
off and unplug the receiver.
If you encounter color irregularity on a 
nearby TV screen
The speakers and the sub woofer are magnetically 
shielded to allow it to be installed near a TV set. 
However, color irregularities may still be observed 
on certain types of
 TV sets.
If color irregularity is observed...
Turn off the TV set once, then turn it on again after 
15 to 30 minutes.
If color irregularity is observed again...
Place the speaker further away from the TV set.
If howling occurs
Reposition the speakers or turn down the volume on 
the receiver.
On cleaning
Clean the cabinet, panel and controls with a soft cloth 
slightly moistened with a mild detergent solution. Do 
not use any type of abrasive pad, scouring powder or 
solvent such as alcohol or benzine.
If you have any question or problem concerning your 
receiver, please consult your nearest Sony dealer.
Additional Information
Precautions
GB01COV_HT-SL800-CEL.book  Page 35  Friday, June 18, 2004  5:04 PM
 
						

							masterpage:Left lename[E:\SEM_Janet\Data_HT-SL800_REV\J9040472_4254753121SL800GB\4254753121\GB09ADD_HT-SL800-CEL.fm]
36GB
 model name1[HT-SL800]
 [4-254-753-12(1)]
If you experience any of the following 
difficulties while using the receiver, use this 
troubleshooting guide to help you remedy the 
problem.
There is no sound or only a very low-level 
sound no matter which component is 
selected.
 Check that the speakers and components are 
connected securely and correctly.
 Check that both the receiver and all components 
are turned on.
 Check that you have selected the correct 
component on the receiver.
 Check that MASTER VOLUME on the receiver is 
not set at 
“VOL MIN”.
 Press MUTING to cancel the muting function.
There is no sound from a specific component.
 Check that the component is connected correctly 
to the audio input jacks for that component.
 Check that the cord(s) used for the connection is 
(are) fully inserted into the jacks on both the 
receiver and the component.
 Check that you have selected the correct 
component on the receiver.
There is no sound from one of the front 
speakers.
 Check that the component is connected correctly 
to the audio input jacks for that component.
 Check that the cord(s) used for the connection is 
(are) fully inserted into the jacks on both the 
receiver and the component.
The left and right sounds are unbalanced or 
reversed.
 Check that the speakers and components are 
connected correctly and securely.
 Adjust balance parameters in the LEVEL menu.
There is severe hum or noise.
 Check that the speakers and components are 
connected securely.
 Check that the connecting cords are away from a 
transformer or motor, and at least 3 meters away 
from a TV set or fluorescent light.
 Move your TV away from the audio components.
 The plugs and jacks are dirty. Wipe them with a 
cloth slightly moistened with alcohol.
There is no sound or only a very low-level 
sound is heard from the center or/and 
surround speakers.
 Make sure the sound field function is on (press 
SOUND FIELD + or SOUND FIELD –).
 Select a CINEMA STUDIO EX mode (page 25).
 Adjust the speaker level (page 17).
There is no sound from the sub woofer.
 Check that the sub woofer is connected correctly 
and securely.
The surround effect cannot be obtained.
 Make sure the sound field function is on (press 
SOUND FIELD + or SOUND FIELD –).
 Sound fields do not function for the signals with a 
sampling frequency of more than 48 kHz.
Dolby Digital or DTS multi channel sound is 
not reproduced.
 Check that the playing DVD, etc. is recorded in 
Dolby Digital or DTS format.
 When connecting the DVD player, etc. to the 
digital input jacks of this receiver, check the audio 
setting (settings for the audio output) of the 
connected component.
Troubleshooting 
GB01COV_HT-SL800-CEL.book  Page 36  Friday, June 18, 2004  5:04 PM
 
						

							Additional Information
masterpage:Right lename[E:\SEM_Janet\Data_HT-SL800_REV\J9040472_4254753121SL800GB\4254753121\GB09ADD_HT-SL800-CEL.fm]
37GB
 model name1[HT-SL800]
[4-254-753-12(1)]
The FM reception is poor.
 Use a 75-ohm coaxial cable (not supplied) to 
connect the receiver to an outdoor FM antenna as 
shown below. If you connect the receiver to an 
outdoor antenna, ground it against lightning. To 
prevent a gas explosion, do not connect the ground 
wire to a gas pipe.
Radio stations cannot be tuned in.
 Check that the antennas are connected securely. 
Adjust the antennas and connect an external 
antenna if necessary.
 The signal strength of the stations is too weak 
(when tuning in with automatic tuning). Use direct 
tuning.
 Make sure you set the tuning interval correctly 
(when tuning in AM stations with direct tuning).
 No stations have been preset or the preset stations 
have been cleared (when tuning by scanning 
preset stations). Preset the stations (page 20).
RDS does not work.*
 Make sure that you are tuned to an FM RDS 
station.
 Select a stronger FM station.
The RDS information that you want does not 
appear.*
 Contact the radio station and find out whether they 
actually provide the service in question. If so, the 
service may be temporarily out of order.
There is no picture or an unclear picture 
appears on the TV screen or monitor.
 Select the appropriate input on the receiver.
 Set your TV to the appropriate input mode.
 Move your TV away from the audio components.
* Models of area code CEL, CEK only.
Remote control
The remote does not function.
 The AUX button on the remote is not available for 
receiver operation.
 The DISPLAY button on the remote is available 
for TUNER input only.*
 Point the remote at the remote sensor   on the 
receiver.
 Remove any obstacles in the path between the 
remote and the receiver.
 Replace all the batteries in the remote with new 
ones, if they are weak.
 Make sure you select the correct input on the 
remote.
 To activate the buttons with orange printing, press 
ALT first before pressing the buttons.
 Before you use the V/v/B/b button for receiver 
operation, press MAIN MENU. To operate other 
components, press TOP MENU/GUIDE or AV 
MENU after pressing the function button.
* Models of area code CEL, CEK only.
Error message
If there is a malfunction, the display shows a 
message.
PROTECT
Irregular current is output from the speakers.  The 
receiver will automatically turn off after a few 
seconds. Check the speaker connection and turn on 
the power again. If this problem persists, consult 
your nearest Sony dealer.
AMU
ANTENNA
Receiver
To ground Ground wire 
(not supplied)  Outdoor FM antenna 
continued
GB01COV_HT-SL800-CEL.book  Page 37  Friday, June 18, 2004  5:04 PM
 
						

							masterpage:Left lename[E:\SEM_Janet\Data_HT-SL800_REV\J9040472_4254753121SL800GB\4254753121\GB09ADD_HT-SL800-CEL.fm]
38GB
 model name1[HT-SL800]
 [4-254-753-12(1)]
If you are unable to remedy the 
problem using the 
troubleshooting guide
Clearing the receiver’s memory may remedy the 
problem (page 14). However, note that all 
memorized settings will be reset to their factory 
settings and you will have to readjust all settings 
on the receiver.
If the problem persist
Consult your nearest Sony dealer.
Reference sections for clearing 
the receiver’s memory
Amplifier section
Power Output
Models of area code CEL, CEK
(6 ohms 1 kHz, THD 0.7%)
1)
FRONT2): 40 W/ch
CENTER2): 40 W
SURR2): 40 W/ch
(6 ohms 1 kHz, THD 10%)1)
FRONT2): 60 W/ch
CENTER2): 60 W
SURR2): 60 W/ch
Models of area code AU
(6 ohms 120 Hz–20 kHz, THD 0.09%)
1)
FRONT2): 35 W/ch
CENTER2): 35 W
SURR2): 35 W/ch
(6 ohms 1 kHz, THD 0.7%)1)
FRONT2): 40 W/ch
CENTER2): 40 W
SURR2): 40 W/ch
(6 ohms 1 kHz, THD 10%)1)
FRONT2): 60 W/ch
CENTER2): 60 W
SURR2): 60 W/ch
Models of area code CN
(6 ohms 1 kHz, THD 0.7%)
1)
FRONT2): 40 W/ch
CENTER2): 40 W
SURR2): 40 W/ch
(6 ohms 1 kHz, THD 10%)1)
FRONT2): 60 W/ch
CENTER2): 60 W
SURR2): 60 W/ch
(6 ohms 1 kHz, THD 0.7%)3)
FRONT2): 37 W/ch
CENTER2): 37 W
SURR2): 37 W/ch
(6 ohms 1 kHz, THD 10%)3)
FRONT2): 55 W/ch
CENTER2): 55 W
SURR2): 55 W/ch
1) Measured under the following conditions:
2) Depending on the sound field settings and the 
source, there may be no sound output.
To clear See
All memorized settings page 14
Customized sound fields page 28
Specifications
Area code Power requirements
CEL, CEK, CN 230 V AC, 50 Hz
AU 240 V AC, 50 Hz
GB01COV_HT-SL800-CEL.book  Page 38  Friday, June 18, 2004  5:04 PM
 
						

							Additional Information
masterpage:Right lename[E:\SEM_Janet\Data_HT-SL800_REV\J9040472_4254753121SL800GB\4254753121\GB09ADD_HT-SL800-CEL.fm]
39GB
 model name1[HT-SL800]
[4-254-753-12(1)]
3) Measured under the following conditions:
Inputs (Analog)
Inputs (Digital)
Outputs (Analog)
Reproduction frequency range:
28 – 20,000 Hz
Tone
FM tuner section
Tuning range 87.5 - 108.0 MHz 
Antenna FM wire antenna
Antenna terminals 75 ohms, unbalanced
Intermediate Frequency 10.7 MHz
AM tuner section
Tuning range
Models of area code CEL, CEK, AU, CN
With 9-kHz tuning scale:  531 - 1,602 kHz
Antenna Loop antenna
Intermediate Frequency 450 kHz
Video section
Inputs/Outputs
Video: 1 Vp-p, 75 ohms
General
Power requirements
Power consumption
Power consumption (during standby mode)
0.3 W
Dimensions (w/h/d) (Approx.)
STR-KSL700 430 × 352 × 64 mm
STR-KSL600 430 × 352 × 66 mm
STR-KSL500 430 × 352 × 64 mm
including projecting parts 
and controls
Mass (Approx.) 5.5 kg
Speaker section
Front speakers
 HT-SL800/HT-SL700 (SS-SLP701)
 HT-SL600/HT-SL500 (SS-MSP501)
Center speaker (SS-CNP501)
Surround speakers (SS-MSP501)
Speaker system  Full range, magnetically 
shielded
Speaker units
SS-SLP701 40 × 70 mm cone type
SS-MSP501/SS-CNP501 55 × 110 mm cone type
Enclosure type Bass reflex
Rated Impedance 6 ohms
Dimension (w/h/d) (Approx.)
SS-SLP701 246 × 1053 × 246 mm
SS-CNP501 280 × 82 × 106 mm
SS-MSP501 76 × 162 × 106 mm
Mass (Approx.)
SS-SLP701 4.0 kg
SS-MSP501 0.8 kg
SS-CNP501 1.0 kg
Area code Power requirements
CN 220 V AC, 50 Hz
TV/SAT, DVD, VIDEO Sensitivity: 500 mV
Impedance: 50 kiloohms
DVD (Coaxial) Sensitivity: –
Impedance: 75 ohms
DVD, TV/SAT (Optical) Sensitivity: –
Impedance: –
SUB WOOFER Voltage: 2 V
Impedance: 1 kiloohms
Gain levels ±6 dB, 1 dB stepArea code Power requirements
CEL, CEK 230 V AC, 50/60 Hz
AU 240 V AC, 50 Hz
CN 220 – 230 V AC, 50/60 Hz
Area code Power consumption
CEL, CEK, AU, CN 170 W 
continued
GB01COV_HT-SL800-CEL.book  Page 39  Friday, June 18, 2004  5:04 PM
 
						

							masterpage:Left lename[E:\SEM_Janet\Data_HT-SL800_REV\J9040472_4254753121SL800GB\4254753121\GB09ADD_HT-SL800-CEL.fm]
40GB
 model name1[HT-SL800]
 [4-254-753-12(1)] Sub woofer
 HT-SL800/HT-SL600 (SA-WMSP601)
 HT-SL700/HT-SL500 (SA-WMSP501)
Speaker system  Active subwoofer,
magnetically shielded
Speaker unit  200 mm cone type
Enclosure type  Acoustically loaded bass
reflex
RMS output
SA-WMSP601 175 W (5 ohms, 100 Hz, 
10% THD)
SA-WMSP501 120 W (6 ohms, 100 Hz, 
10% THD)
Frequency range: 30 Hz – 200 Hz
Input  LINE IN (input pin jacks)
Power requirements
Power consumption
SA-WMSP601 120 W
SA-WMSP501 95 W
Dimensions (w/h/d) (Approx.)
SA-WMSP601/SA-WMSP501
270 × 325 × 398 mm 
including front panel
Mass (Approx.)
SA-WMSP601 10 kg 
SA-WMSP501 9 kg
Supplied accessories
FM wire antenna (1)
AM loop antenna (1)
Speaker connecting cord (5)
Monaural connecting cord (1)
Coaxial digital cord (1)
Foot pads (speakers)
 HT-SL800/HT-SL700 (12)
 HT-SL600/HT-SL500 (20)
Foot pads (subwoofer) (4)
Remote commander (1)
R6 (size-AA) batteries (2)
Speakers
 Front speakers (2)
 Center speaker (1)
 Surround speakers (2)
 Sub woofer (1)
Design and specifications are subject to change 
without notice.
Area code Power requirements
CEL, CEK, AU, CN 230 V AC, 50/60 HzFor details on the area code of the component you are 
using, see page 3.
GB01COV_HT-SL800-CEL.book  Page 40  Friday, June 18, 2004  5:04 PM