Sony Ht Sl5 Operating Instructions

							Home Theater
System
4-241-634-11(2)
HT-SL5
© 2002 Sony Corporation
FRGB
ES
Operating Instructions
 
						

							2GB
WARNING
To prevent fire or shock hazard, do not
expose the unit to rain or moisture.
To prevent fire, do not cover the ventilation of the
apparatus with news papers, table-cloths, curtains,
etc. And don’t place lighted candles on the apparatus.
To prevent fire or shock hazard, do not place objects
filled with liquids, such as vases, on the apparatus.
Don’t throw away the battery with
general house waste, dispose of it
correctly as chemical waste.
Do not install the appliance in a confined space, such
as a bookcase or built-in cabinet.
This receiver incorporates Dolby* Digital and Pro
Logic Surround and the DTS** Digital Surround
System.
*Manufactured under license from Dolby
Laboratories.
“Dolby”, “Pro Logic” and the double-D symbol are
trademarks of Dolby Laboratories.
** “DTS” and “DTS Digital Surround” are registered
trademarks of Digital Theater Systems, Inc.
TipThe instructions in this manual describe the controls
on the remote. You can also use the controls on the
receiver if they have the same or similar names as
those on the remote. For details on the use of your
remote, see pages 33–36.
 
						

							3GB
Table of Contents
Parts Identification
Main unit ............................................... 4
Hooking Up the Components
Required cords ....................................... 5
Antenna hookups ................................... 6
Video component hookups .................... 7
Digital component hookups ................... 8
Other hookups ....................................... 9
Hooking Up and Setting Up
the Speaker System
Speaker system hookups ..................... 10
Performing initial setup operations ..... 12
Multi channel surround setup .............. 12
Checking the connections .................... 17
Basic Operations
Selecting the component ..................... 17
Enjoying Surround Sound
Selecting a sound field ........................ 18
Understanding the multi channel
surround displays .......................... 20
Customizing sound fields .................... 21
Receiving Broadcasts
Direct tuning ........................................ 23
Automatic tuning ................................. 23
Preset tuning ........................................ 24
Other Operations
Using the Sleep Timer ......................... 25
Adjustments using the SET UP menu ....25
Additional Information
Precautions .......................................... 27
Troubleshooting ................................... 27
Specifications ...................................... 29
Tables of settings using MAIN MENU
button ............................................ 31
Adjustable parameters for each sound
field ............................................... 32
Before you use your remote ................ 33
Remote button description ................... 33
Changing the factory setting of
a function button ............. Back cover
 
						

							4GB
Display 7 (20)
DVD 4 (17)
IR receptor 2
MASTER VOLUME 9 (17)
MUTING qs (17)
PLII q; (19)
PRESET TUNING +/– 8 (24)
SOUND FIELD qa (18, 21)
TUNER 6 (17, 23, 24)
TV/SAT 5 (17)
VIDEO 3 (17)
?/1 (power) 1 (12, 16, 17, 22)
Parts Identification
Main unit
The items are arranged in alphabetical order.
Refer to the pages indicated in parentheses ( ) for details.
12345679q;
qs qa
8
 
						

							5GB
Hooking Up the ComponentsRequired cords
Before you get started
•Turn off the power to all components before making any connections.
•Do not connect the AC power cord until all of the connections are completed.
•Be sure to make connections firmly to avoid hum and noise.
•When connecting optical digital cords, insert the cord plugs straight in until they click into place.
•Do not bend or tie the optical digital cord.
AAudio/video cord (not supplied)
Yellow (video) Yellow (video)
White (L/audio) White (L/audio)
Red (R/audio) Red (R/audio)
BVideo cord (not supplied)Yellow (video) Yellow (video)
COptical digital cord (not supplied)
DCoaxial digital cord (supplied)
Orange Orange
Hooking Up the Components
5GB
Parts Identification/Hooking Up the Components
 
						

							6GB
Antenna hookups
Notes on antenna hookups
•To prevent noise pickup, keep the AM loop
antenna away from the receiver and other
components.
•Be sure to fully extend the FM wire antenna.
•After connecting the FM wire antenna, keep it
as horizontal as possible.
•Do not use the U SIGNAL GND terminal for
grounding the receiver.
ANTENNA
L
RVIDEO IN
IN IN INOUT
OUT
IMPEDANCE USE 8–16Ω
R–FRONT–L
VIDEO IN VIDEO OUT VIDEO IN MONITOR OUT75Ω COAXIALFMAMU
VIDEO
DVD
TV/SATCOAX IN
DVDTV/SATDIGITAL
SUB
WOOFER
SPEAKERS
+
–+
–
OPTICAL IN OPTICAL IN
FM wire antenna
(supplied)
AM loop antenna
(supplied)
 
						

							7GB
Hooking Up the Components
 AUDIO OUTVIDEO OUT
OUTPUT
L
R
 AUDIO OUTVIDEO OUT
OUTPUT
L
R AUDIO INVIDEO IN
MONITOR IN
 AUDIO OUTVIDEO OUT
INPUT
INPUT
OUTPUT
L
R
IN OUTÇ
Ç
B A
AAA
ANTENNA
L
RVIDEO IN
IN IN INOUT
OUT
IMPEDANCE USE 8–16Ω
R–FRONT–L
VIDEO IN VIDEO OUT VIDEO IN MONITOR OUT75Ω COAXIALFMAM
VIDEO
DVD
TV/SAT
DVDTV/SATDIGITAL
SUB
WOOFER
SPEAKERS
+
–+
–U
COAX IN
OPTICAL IN OPTICAL IN
Video component hookups
VCR TV monitor
For details on the required cords (A – D), see page 5.
DVD player
Digital satellite tuner
 
						

							8GB
OUTPUTOPTICAL COAXIAL
OUTPUTOPTICAL
C*
CD
*
ANTENNA
L
RVIDEO IN
IN IN INOUT
OUT
IMPEDANCE USE 8–16Ω
R–FRONT–L
VIDEO IN VIDEO OUT VIDEO IN MONITOR OUT75Ω COAXIALFMAM
VIDEO
DVD
TV/SAT
DVDTV/SATDIGITAL
SUB
WOOFER
SPEAKERS
+
–+
–U
COAX IN
OPTICAL IN OPTICAL IN
Digital component hookups
DVD player (etc.)
Connect the digital output jacks of your DVD player (etc.) to the receiver’s digital input jacks to
bring the multi channel surround sound of a movie theater into your home. To fully enjoy multi
channel surround sound, five speakers (two front speakers, two surround speakers, and a center
speaker) and a sub woofer are required.
Digital satellite
tuner (etc.)
*Connect to either the COAX IN or OPTICAL IN jack. We recommend making connections to the COAX IN
jack.
Notes•The OPTICAL IN and COAX IN jacks are compatible with 96 kHz, 48 kHz, 44.1 kHz and 32 kHz sampling
frequencies.
•To playback the multi channel surround sound through this receiver, you may have to change the digital output
setting on the connected component. For details, refer to the operating instructions supplied with the component.
 
						

							9GB
Hooking Up the ComponentsOther hookups
AC power cord
To a wall outlet
Connecting the AC power
cord
Before connecting the AC power cord of this
receiver to a wall outlet, connect the speaker
system to the receiver (see page 10).
Connect the AC power cord(s) of your audio/
video components to a wall outlet.
b
IMPEDANCE USE 8–16Ω
R–FRONT–LIMPEDANCE USE 8–16
Ω
R–SURR–L CENTERSPEAKERS
+
–+
–
SPEAKERS
+
–+
–
 
						

							10GB
INPUTAUDIO
IN
BA A A
A Ab
E eE eE e
EeE e
OUT
IMPEDANCE USE 8–16Ω
R–FRONT–LIMPEDANCE USE 8–16
Ω
R–SURR–L CENTER
MONITOR OUTSUB
WOOFER
SPEAKERS
+
–+
–
SPEAKERS
+
–+
–
Speaker system hookups
Before connecting speakers, be sure to turn off this unit.
Required cords
ASpeaker cords (supplied)
(+) (+)
(–) (–)
BMonaural audio cord (supplied)Black Black
Hooking Up and Setting Up the Speaker System
Front speaker (L) Front speaker (R)Center speaker Surround speaker
(L) Surround speaker
(R) Active sub woofer
To a wall outlet
(Switch the power
(POWER) to off
before connecting the
power cord.)
Tip
To prevent speaker vibration or movement while
listening, attach the supplied foot pads at the bottom
of the speakers.