Sony Ht Ddwg800 Operating Instructions

51GB
 
 
 
 
Tuner Operations
Listening to FM/AM radio
You can listen to FM and AM broadcasts 
through the built-in tuner. Before operation, 
make sure you have connected the FM and 
AM antennas to the receiver (page 26).
Tip
The tuning scale for direct tuning differs depending 
on the area code as shown in the following table. For 
details on area codes, see page 3.
1Press TUNER repeatedly to 
select the FM or AM band.
You can also use INPUT SELECTOR on 
the receiver.
2Press TUNING + or TUNING –.
Press...

52GB
In case of poor FM stereo 
reception
If the FM stereo reception is poor and “ST” 
flashes on the display, select monaural audio 
so that the sound will be less distorted.
Press FM MODE repeatedly until the 
“MONO” indicator lights up on the display.
To return to stereo mode, press FM MODE 
repeatedly until the “MONO” indicator on the 
display lights off.
You can enter the frequency of a station 
directly by using the numeric buttons.
1Press TUNER repeatedly to 
select the FM or AM band.
You can also...

53GB
 
 
 
 
Tuner Operations
Presetting radio stations
You can preset up to 30 FM stations and 30 
AM stations. Then you can easily tune in the 
stations you often listen to.
1Press TUNER repeatedly to 
select the FM or AM band.
You can also use INPUT SELECTOR on 
the receiver.
2Tune in the station that you 
want to preset using Automatic 
Tuning (page 51) or Direct 
Tuning (page 52).
If the FM stereo reception is poor, switch 
the FM reception mode (page 52).
3Press MEMORY.
You can also use...

54GB
1Press TUNER repeatedly to 
select the FM or AM band.
2Press PRESET + or PRESET – 
repeatedly to select the preset 
station you want.
Each time you press the button, you can 
select a preset station as follows:
You can also press the numeric buttons to 
select the preset station you want. Then, 
press ENTER to enter the selection.
Using the controls on the 
receiver
1Turn INPUT SELECTOR to select the FM 
or AM band.
2Press TUNING MODE repeatedly to select 
“PRESET T.”.
3Press TUNING + or TUNING –...

55GB
 
 
 
 
Tuner Operations
To create an index name
1Use V/v/B/b to create an index name.
Press V/v to select a character, then press  
B/b to move the cursor to the next position.
If you made a mistake
Press B/b until the character you want to 
change flashes, then press V/v to select the 
correct character.
Tips
 You can select the character type as follows by 
pressing V/v. 
Alphabet (upper case) t Numbers t 
Symbols
 To enter a blank space, press 
b without 
selecting a character.
2Press   to...

56GB
While receiving an RDS station, 
press DISPLAY repeatedly on the 
receiver.
Each time you press the button, RDS 
information on the display changes cyclically 
as follows:
Program Service name t Frequency t 
Program Type indication
a) t Radio Text 
indicationb) t Current Time indication (in 
24-hour system mode) t Sound field 
currently applied
a)Type of program being broadcast.b)Text messages sent by the RDS station.
Notes
 If there is an emergency announcement by 
government authorities, “ALARM”...

57GB
 
 
 
 
 
Control for HDMI
Using the Control for 
HDMI function for 
“BRAVIA” Sync
To use “BRAVIA” Sync, set the Control for 
HDMI function as explained below.
By connecting Sony components that are 
compatible with the Control for HDMI 
function with an HDMI cable (not supplied), 
operation is simplified as follows:
 One-Touch Play: When you play back a 
component such as a DVD/Blu-ray disc 
player, the receiver and the TV are turned on 
automatically and switched to the 
appropriate HDMI input.
...

58GB
Before connecting cords, be sure to disconnect 
the AC power cord.
To enjoy TV multi channel 
surround sound broadcasting
You can listen to TV multi channel surround 
sound broadcasting from the speakers 
connected to the receiver.
Connect the OPTICAL output jack of the TV 
to the OPTICAL IN jack of the receiver.
a)Connect at least one of the audio cords (B or C).
Connecting a TV and other 
components
AM
OUTINL
R
Y
P
B/
CB
PR/
CR
DIGITAL(ASSIGNABLE)
DMPORT
OPTICALSAT
IN
DVD 
IN
COAXIAL
ANTENNA
SUB...

59GB
 
 
 
 
 
Control for HDMI
Preparing Control for 
HDMI function
This receiver supports the Control for HDMI- 
Easy Setting function.
This function is only available for certain 
types of TV. When you perform the Control 
for HDMI-Easy Setting from the TV, the 
Control for HDMI setting on this receiver will 
automatically change accordingly. 
During the Control for HDMI-Easy Setting 
operation, “CONTROL”, “SCAN FOR” and 
“HDMI”  appear sequentially in the display. 
This receiver will automatically...

60GB
1Press AMP MENU.
“1-LEVEL” appears on the display.
2Press V/v repeatedly to select 
“6-VIDEO”.
3Press  or b to enter the 
menu.
4Press V/v repeatedly to select 
“CONTROL FOR HDMI”.
“CONTROL FOR HDMI” scrolls across 
the display, then “CONTROL” appears.
5Press  or b to enter the 
parameter.
6Press V/v repeatedly to select 
“CTRL ON”.
Control for HDMI function is activated.
Watching a DVD  
(One-Touch Play)
You can enjoy sound and image from the 
components connected to the receiver via 
HDMI...