Sony Ht Ddw740 Operating Instructions
Have a look at the manual Sony Ht Ddw740 Operating Instructions online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 980 Sony manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
Operations Using the Remote RM-PP411 41GB Remote Operations Function Button AUDIO TV/ VCR/ Changes the sound to DVD player Multiplex, Bilingual or Multi channel TV Sound. SWAP*/ TV Swaps the small and ANGLE large picture. DVD player To select viewing angle or changes the angles. JUMP/ TV Toggles between the TIME previous and the current channels. CD player/ Shows the time or VCD player/ displays the playing time DVD player of disc, etc. PRESET/ Receiver Scans and selects preset CH/ stations. D.SKIP +/–TV/VCR/ Selects preset channels. satellite tuner CD player/ Skips discs (multi-disc VCD player/ changer only). DVD player/ MD deck ENTER TV/VCR/ After selecting a channel,satellite tuner/disc or track using theLD player/numeric buttons, press toMD deck/ enter the value. DAT deck/ Tape deck DISC CD player/ Selects a disc directly VCD player (multi-disc changer only). ANT VCR Selects output signal from aerial terminal: TV signal or VCR program. ./>VCR/ Skips tracks. CD player/ VCD player/ LD player/ DVD player/ MD deck/ DAT deck/ Tape deck * Only for Sony TVs with the picture-in-picture function. Remote Operations Function Button m/MCD player/ Searches tracks VCD player/ (forward or backward). DVD player/ LD player/ MD deck VCR/ Fastforwards or DAT deck/ rewinds. Tape deck NVCR/ Starts play. CD player/ VCD player/ LD player/ DVD player/ MD deck/ DAT deck/ Tape deck XVCR/ Pauses play or record. CD player/ (Also starts recording VCD player/ with components in LD player/ record standby.) DVD player/ MD deck/ DAT deck/ Tape deck xVCR/ Stops play. CD player/ VCD player/ LD player/ DVD player/ MD deck/ DAT deck/ Tape deck DISPLAY TV/VCR/ Selects information VCD player/ displayed on the TV LD player/ screen. DVD player RETURN/ VCD player/ Returns to the previous EXIT LD player/ menu. DVD player Satellite Exits the menu. tuner SUBTITLEDVD player Changes the subtitles. continued
42GB Remote Operations Function Button CLEAR DVD player Press if you made a mistake when you press the number button or press to return to the continuous play etc. SEARCH DVD player Select searching mode. MODE Press to select the unit for search (track, index, etc.) TOP MENU/DVD player Displays DVD title. GUIDE AV MENU VCR/Satellite/ Displays menu. tuner/ DVD player OVCD player/ Returns to the previous LD player/ menu or exits the menu. DVD player V/v/B/bVCR/Satellite Selects a menu item. tuner/ DVD player ENTER/ VCR/satellite Press to enter theEXECUTEtuner/ selection. DVD player TV ?/1TV Turns the TV on or off. -/-- TV Selects the channel entry mode, either one or two digit. TV VOL TV Adjust the volume of the +/–TV. TV CH +/–TV Select preset TV channels. TV/ TV Selects input signal: TV VIDEO input or video input. WIDE TV Selects the wide picture mode. USE MODERemote To set up the remote. AV1 and Remote Select the command AV2 mode of the remote. SOURCE Remote Selects 2ND AV output. ALT Remote Change remote key function to activate those buttons with orange printing. Notes•Some functions explained in this section may not work depending on the model of the receiver. •The above explanation is intended to serve as an example only. Therefore, depending on the component the above operation may not be possible or may operate differently than described. •The VIDEO 3, TV/SAT, PHONO, AUX, SOURCE, MPX/DUAL, ANALOG DIRECT, 12 and ON SCREEN functions are not available for set operation. Selecting the mode of the remote Set the remote mode using the USE MODE button and the remote mode buttons. Selecting the command mode You can switch the command mode (AV1 or AV2) of the remote. If the command mode of the receiver and the remote is different, you cannot use the remote to operate the receiver. Press 1 (AV1) (or 2 (AV2)) while pressing down USE MODE. The indicator lights once (twice for AV2) , then the command mode switches. To check the mode of the remote Press USE MODE. You can check the remote by the indicator. Mode Indicator lights AV1 once AV2 twice To reset the remote to factory settings Press =/1, AV =/1, and MASTER VOL – at the same time. The indicator lights 3 times, then goes off. Remote Button Description (continued)
Operations Using the Remote RM-PP411 43GB Programming the remote You can program the remote to control non- Sony components by changing the code. Once the control signals have been memorized, you can use those components as part of your system. Furthermore, you can also program the remote for Sony components that the remote is unable to control. Note that the remote can only control components that accept infrared wireless control signals. 1Press AV ?/1 while pressing down USE MODE. The indicator lights. 2Press the function button (including TV ?/1) for the component you want to control. For example, if you are going to control a CD player, press CD/SACD. 3Press the numeric buttons to enter the numeric code (or one of the codes if more than one code exists) corresponding to the component and the maker of the component you want to control. See the tables on pages 44 and 45 for information on the numeric code(s) corresponding to the component and the maker of the component (the first digit and the last two digits of the numeric code correspond to the category and the maker’s code respectively.) 4Press ENTER. Once the numeric code has been verified, the indicator slowly flashes twice and the remote automatically exits the programming mode. 5Repeat steps 1 to 4 to control other components. To cancel programming Press USE MODE during any step. The remote automatically exits the programming mode. To activate the function after programming. Press the programmed button to activate the function you want. If programming is unsuccessful, check the following: •If the indicator does not light up in step 1, the batteries are weak. Replace both batteries. •If the indicator flashes 4 times in quick succession while entering the numeric code, an error has occurred. Start again from step 1. Notes•The indicator turns off while a valid button is pressed. •In step 2, if several function buttons are pressed, only the last pressed button is valid. •In step 2, if you press TV ?/1, only TV VOL +/–, TV CH +/–, TV/VIDEO and WIDE buttons are reprogrammed. •In step 3, if a function button is pressed, the new function is selected and the programming procedure returns to the beginning of step 3. •For the numeric codes, only the first three numbers entered are valid. To clear the memory of the remote To clear all programmed and learned signals, do the following to reset the remote to factory settings. Press ?/1, AV ?/1 and MASTER VOL – at the same time. The indicator flashes 3 times, then goes off. continued
44GB The numeric codes corresponding to the component and the maker of the component Use the numeric codes in the tables below to control non-Sony components and also Sony components that the remote is normally unable to control. Since the remote signal that a component accepts differs depending on the model and year of the component, more than one numeric code may be assigned to a component. If you fail to program your remote using one of the codes, try using other codes. Notes•The numeric codes are based on the latest information available for each brand. There is a chance, however, that your component will not respond to some or all of the codes. •All of the functions on this remote may not be available when used with your particular component. To control a CD player Maker Code(s) SONY 101, 102, 103 DENON 104, 123 JVC 105, 106, 107 KENWOOD 108, 109, 110 MAGNAVOX 111, 116 MARANTZ 116 ONKYO 112, 113, 114 PANASONIC 115 PHILIPS 116 PIONEER 117 TECHNICS 115, 118, 119 YAMAHA 120, 121, 122 Programming the remote (continued)To control a DAT deck Maker Code(s) SONY 203 PIONEER 219 To control an MD deck Maker Code(s) SONY 301 DENON 302 JVC 303 KENWOOD 304 To control a tape deck Maker Code(s) SONY 201, 202 DENON 204, 205 KENWOOD 206, 207, 208, 209 NAKAMICHI 210 PANASONIC 216 PHILIPS 211, 212 PIONEER 213, 214 TECHNICS 215, 216 YAMAHA 217, 218 To control an LD player Maker Code(s) SONY 601, 602, 603 PIONEER 606 To control a video CD player Maker Code(s) SONY 605
Operations Using the Remote RM-PP411 45GB To control a VCR Maker Code(s) SONY 701, 702, 703, 704, 705, 706 AIWA 710, 750, 757, 758 AKAI 707, 708, 709, 759 BLAUPUNKT 740 EMERSON 711, 712, 713, 714, 715, 716, 750 FISHER 717, 718, 719, 720 GENERAL ELECTRIC 721, 722, 730 GOLDSTAR 723, 753 GRUNDIG 724 HITACHI 722, 725, 729, 741 ITT/NOKIA 717 JVC 726, 727, 728, 736 MAGNAVOX 730, 731, 738 MITSUBISHI/MGA 732, 733, 734, 735 NEC 736 PANASONIC 729, 730, 737, 738, 739, 740 PHILIPS 729, 730, 731 PIONEER 729 RCA/PROSCAN 722, 729, 730, 731, 741, 747 SAMSUNG 742, 743, 744, 745 SANYO 717, 720, 746 SHARP 748, 749 TELEFUNKEN 751, 752 TOSHIBA 747, 755, 756 ZENITH 754 To control a DVD player Maker Code(s) SONY 401, 402, 403 PANASONIC 406, 408 PHILIPS 407 PIONEER 409 TOSHIBA 404 DENON 405 To control a TV Maker Code(s) SONY 501 DAEWOO 504, 505, 506, 507, 515, 544 FISHER 508 GOLDSTAR 503, 511, 512, 515, 534, 544 GRUNDIG 517, 534 HITACHI 513, 514, 515, 544 ITT/NOKIA 521, 522 JVC 516 MAGNAVOX 503, 518, 544 MITSUBISHI/MGA 503, 519, 544 NEC 503, 520, 544 PANASONIC 509, 524 PHILIPS 515, 518 PIONEER 509, 525, 526, 540 RCA/PROSCAN 510, 527, 528, 529, 544 SAMSUNG 503, 515, 531, 532, 533, 534, 544 SANYO 508, 545 SHARP 535 TELEFUNKEN 523, 536, 537, 538 THOMSON 530, 537, 539 TOSHIBA 535, 540, 541 ZENITH 542, 543 To control a satellite tuner or cable box Maker Code(s) SONY 801, 802 JERROLD/G.I. 806, 807, 808, 809, 810, 811, 812, 813, 814 PANASONIC 818 RCA 805, 819 S. ATLANTA 815, 816, 817
46GB HT-DDW740 only You can use the remote RM-U306 to operate the components in your system. Before you use your remote Inserting batteries into the remote Insert R6 (size-AA) batteries with the + and – properly oriented in the battery compartment. When using the remote, point it at the remote sensor g on the receiver. TipUnder normal conditions, the batteries should last for about 6 months. When the remote no longer operates the receiver, replace all batteries with new ones. Notes•Do not leave the remote in an extremely hot or humid place. •Do not use a new battery with an old one. •Do not expose the remote sensor to direct sunlight or lighting apparatuses. Doing so may cause a malfunction. •If you don’t use the remote for an extended period of time, remove the batteries to avoid possible damage from battery leakage and corrosion. Remote button description NX m M . > 123 456 78 09 MD/TAPE CD TUNER TV/VIDEO VIDEO 2 VIDEO 1 DVD/LD SYSTEM STANDBY >10SHIFT CH/PRESET - ANT TV/VTR SOUND FIELD –+ MASTER VOL TEST TONE MAIN MENU MULTI CH ENTER D.SKIP A.DEC2CH MODED.TUNING TOP MENU DVD MENU ENTER RETURN fF Gg SLEEPAV?/1?/1 MENU TV VOL TV CHMUTING O x ] ] } } Operations Using the Remote RM-U306
Operations Using the Remote RM-U306 47GB Remote Operations Function Button MENU +/–Receiver Makes adjustment or change the setting. MUTING Receiver Mutes the sound from the receiver. MASTER Receiver Adjust the master volume VOL+/–of the receiver. AV ?/1TV/VCR/ Turns the audio and CD player/ video components on VCD player/ or off. LD player/ DVD player/ MD deck/ DAT deck SYSTEM Receiver/TV/ Turns off the receiver and STANDBY VCR/Satellite other Sony audio/video (Press tuner/CD components. AV ?/1player/VCD and ?/1player/LD player/ at the DVD player/MD same time) deck/DAT deck/ Tape deck 0-9 Receiver Use with “SHIFT” button to select tuner preset station numeric input during DIRECT TUNING or MEMORY mode. CD player/ Selects track numbers. VCD player/ 0 selects track 10. LD player/ MD deck/ DAT deck TV/VCR/ Selects channel numbers. satellite tuner >10 CD player/ Selects tracks numbers VCD player over 10. LD player/ MD deck/ Tape deck ENTER TV/VCR/ After selecting a channel, Satellite tuner/ disc or track usng the LD player/ numeric buttons, press MD deck/to enter the value.DAT deck/Tape deck RETURN VCD player Go back to previous menu. The tables below show the settings of each button. Remote Operations Function Button SLEEP Receiver Activates the sleep function and the duration which the receiver turns off automatically. ?/1Receiver Turns the receiver on or off. VIDEO 1 Receiver To watch VCR. (VTR mode 3) VIDEO 2 Receiver To watch VCR. (VTR mode 1) DVD/LD Receiver To watch DVD or laser disc. MD/TAPE Receiver To listen to Minidisc or audio tape. CD Receiver To listen to compact disc. TUNER Receiver To listen to radio programs. SHIFT Receiver Press repeatedly to select a memory page for presetting radio stations or tuning to preset stations. D.TUNINGReceiver Tuner station direct key- in-mode. A.DEC Receiver Selects AUTO DECODING mode. MODE Receiver Selects sound field mode. 2CH Receiver Selects 2CH mode. TEST Receiver Press to output test tone. TONE MAIN Receiver Press this button MENU repeatedly to select one of the four cursor modes: SURR, LEVEL, SET UP and NAME. MULTI CHReceiver Select MULTI CH IN source. MENU Receiver Selects a menu item. continued
48GB Remote Operations Function Button D. SKIP CD player/ Skips discs (multi-disc VCD player/ changer only). DVD player/ MD deck TOP DVD player Displays DVD title. MENU DVD DVD player Displays DVD menu. MENU ENTER DVD player Enters the selection. ODVD player Returns to the previous menu or exits the menu. V/v/B/bDVD player Selects a menu item. -/-- TV Selects the channel entry mode, either one or two digit. TV/VIDEOTV Selects input signal: TV input or video input. TV VOL TV Adjusts the volume +/–of the TV. TV CH TV Selects preset TV +/–channels. Notes•When you press the function buttons (VIDEO 1, VIDEO 2, DVD/LD), the input mode of the TV might not switch to the corresponding input mode that you want. In this case, press the TV/VIDEO button to switch the input mode of the TV. •Some functions explained in this section may not work depending on the model of the receiver. •The above explanation is intended to serve as an example only. Therefore, depending on the component the above operation may not be possible or may operate differently than described. •The MULTI CH function is not available for set operation. Remote Operations Function Button CH/Receiver Scans and selects presetPRESET+/–stations. TV/VCR/ Selects preset channels. satellite tuner ./>VCR/ Skips tracks. CD player/ VCD player/ LD player/ DVD player/ MD deck/ DAT deck/ Tape deck m/MCD player/ Searches tracks DVD player/ (forward or backward). VCD player VCR/ Fastforwards or LD player/ rewinds. MD deck/ DAT deck/ Tape deck NVCR/ Starts play. CD player/ VCD player/ LD player/ DVD player/ MD deck/ DAT deck/ Tape deck XVCR/ Pauses play or record. CD player/ (Also starts recording VCD player/ with components in LD player/ record standby.) DVD player/ MD deck/ DAT deck/ Tape deck xVCR/ Stops play. CD player/ VCD player/ LD player/ DVD player/ MD deck/ DAT deck/ Tape deck ANT VCR Selects output signal TV/VTR from the aerial terminal: TV signal or VCR program. Remote Button Description (continued)
Operations Using the Remote RM-U306 49GB Changing the factory setting of a function button If the factory settings of the FUNCTION buttons do not match your system components, you can change them. For example, if you have a tape deck and you do not have an MD deck, you can assign the MD/TAPE button to your tape deck. Note that the settings of the TUNER button cannot be changed. 1Hold down the Function button whose function you want to change (for example, MD/TAPE). 2Press the corresponding button of the component you want to assign to the Function button (for example, 4 – Tape deck). The following buttons are assigned to select the functions: To operate Press CD player 1 DAT deck 2 MD deck 3 Tape deck A 4 Tape deck B 5 LD player 6 VCR (command mode VTR 1*) 7 VCR (command mode VTR 2*) 8 VCR (command mode VTR 3*) 9 TV 0 DSS (Digital Satellite Receiver) >10 DVD ENTER VCD player. * Sony VCRs are operated with a VTR 1, 2 or 3 setting. These correspond to Beta, 8mm and VHS respectively. Now you can use the MD/TAPE button to control the tape deck. To reset a button to its factory setting Repeat the above procedure. To reset all the function buttons to their factory setting Press ?/1, AV ?/1 and MASTER VOL – at the same time.
50GB Additional Information If you encounter color irregularity on a nearby TV screen This speaker system is magnetically shielded to allow it to be installed near a TV set. However, color irregularities may still be observed on certain types of TV sets. If color irregularity is observed... Turn off the TV set once, then turn it on again after 15 to 30 minutes. If color irregularity is observed again... Place the speaker further away from the TV set. If howling occurs Reposition the speakers or turn down the volume on the receiver. On cleaning Clean the cabinet, panel and controls with a soft cloth slightly moistened with a mild detergent solution. Do not use any type of abrasive pad, scouring powder or solvent such as alcohol or benzine. If you have any question or problem concerning your receiver, please consult your nearest Sony dealer. Troubleshooting If you experience any of the following difficulties while using the receiver, use this troubleshooting guide to help you remedy the problem. Also, see “Checking the connections” on page 21 to verify that the connections are correct. Should any problem persist, consult your nearest Sony dealer. There is no sound or only a very low-level sound no matter which component is selected. •Check that the speakers and components are connected securely and correctly. •Check that both the receiver and all the components are turned on. •Check that the MASTER VOLUME control is not set at VOL MIN. •Press MUTING to cancel the muting function. •Check that the handphones are not connected. •The protective device on the receiver has been activated because of a short circuit (“PROTECT” flashes). Turn off the receiver, eliminate the short-circuit problem and turn on the power again. Precautions On safety Should any solid object or liquid fall into the cabinet, unplug the receiver and have it checked by qualified personnel before operating it any further. On power sources •Before operating the unit, check that the operating voltage is identical with your local power supply. The operating voltage is indicated on the nameplate at the rear of the receiver. •The unit is not disconnected from the AC power source (mains) as long as it is connected to the wall outlet, even if the receiver itself has been turned off. •If you are not going to use the receiver for a long time, be sure to disconnect the receiver from the wall outlet. To disconnect the AC power cord, grasp the plug itself; never pull the cord. •(Models of area code U, CA only) One blade of the plug is wider than the other for the purpose of safety and will fit into the wall outlet only one way. If you are unable to insert the plug fully into the outlet, contact your dealer. •AC power cord must be changed only at the qualified service shop. On heat buildup Although the unit heats up during operation, this is not a malfunction. If you continuously use this unit at a large volume, the cabinet temperature of the top, side and bottom rises considerably. To avoid burning yourself, do not touch the cabinet. On placement •Place the receiver in a location with adequate ventilation to prevent heat buildup and prolong the life of the receiver. •Do not place the receiver near heat sources, or in a place subject to direct sunlight, excessive dust or mechanical shock. •Do not place anything on top of the cabinet that might block the ventilation holes and cause malfunctions. On operation Before connecting other components, be sure to turn off and unplug the receiver.