Home > Sony > Television > Sony Fe1 Owners Manual

Sony Fe1 Owners Manual

Here you can view all the pages of manual Sony Fe1 Owners Manual. The Sony manuals for Television are available online for free. You can easily download all the documents as PDF.

Overview View all the pages Comments

Page 21

21
KV-29X5
Same Level
B-Out Waveform
JW130
11
TUNER
17
L103IC101
RV101A
A Board component side
25 2.21V +/- 0.01V
29 2.52V +/- 0.01V
R - out Waveform
SUB BRIGHTNESS ADJUSTMENT
1. Input a Phillips colour pattern.
2.Press ‘TEST’ ‘TEST’ 13 on the Remote Commander.
3. Adjust the ‘Sub-Brightness’ data so that there is barely a 
difference between the 0 IRE and 10 IRE signal levels.
SUB CONTRAST ADJUSTMENT
1. Input a video signal that contains a small 100% white area on a 
black background 
2. Set the picture...

Page 22

22
KV-29X5
V SIZE
V LIN
S CORRECTION
V CENTRE
H CENTRE
H SIZE
PIN AMP
PIN PHASE
CORNER PIN
V ANGLE
DEFLECTION SYSTEM ADJUSTMENT
1.Enter into the ‘Geometry’ service menu.
2. Select and adjust each item in order to obtain the optimum 
image.
GEOMETRY 
V centre Adj
V size Adj
V Lin Adj
S Corr Adj
H Cent Adj
H Size Adj
Pin Amp Adj
Corner Pin Adj
Pin Phase Adj
V Bow Adj
V Angle Adj
Upper V Lin Adj
Lower V Lin Adj
Left HBLK 07
Right HBLK 07
CD Mode (AV) 01

Page 23

23
KV-29X5
4-2. TEST MODE 2:
00 Cancel Test mode
01 Picture maximum
02 Picture minimum
03 Volume 35%
04 Volume 50%
05 Volume 65%
06 Volume 80%
07 Ageing mode  On/Off
08 Set shipping conditions
09 Display TV Status
10 No function
11 Sub Picture Adjustment
12 Sub Colour Adjustment
13 Sub Brightness Adjustment
14 Text H position Adjustment
15 Rotation test
16 Picture level 50%
17 Audio mute ON
18 Disable Blanking
19 No function
20 No function
21 Destination A
22 Destination L
23 Destination E
24 Destination...

Page 24

24
KV-29X5
StBy LED
ON ON ON
OFF OFF
(ON SCREEN
   DISPLAY)
5
(DIGIT 5)(VOLUME -)
(TV)
i+
Table 1
Flash Timing Example : e.g. error number 3
How to enter into Table 2
1. Turn on the main power switch of the TV set and enter into the 
‘Standby Mode’.
2. Press the following sequence of buttons on the Remote 
Commander.
3. The following table will be displayed indicating the error 
count.
Table 2
Note: To clear the error count data press ‘80’ on the Remote 
commander.
ERRORLED
ERROR
COUNT
 No error 00
Not...

Page 25