Sony Ericsson T610 Manual

This
 is the Internet version 
of the users gui
de. © Pr
int on
ly for private us
e.
Calling 31
Before voice dialling
You must first turn on the voice dialling function and 
record your voice commands.
To turn voice dialling on and record number 
types
1. Scroll to  Settings, Vo i c e  c o n t r o l , Voice dialling .
2. Select On. Now you are going to record a voice 
command for each number type you use with your 
Phonebook contacts, for example, “home” or “mobile”.
3. Instructions appear. Press 
OK.
4....

This
 is the Internet version 
of the users gui
de. © Pr
int on
ly for private us
e.
32 Calling3.If you have several numbers for that contact, after a 
second tone, say the number type, for example, “home”.
The number type is played back to you, and the call  
is connected.
From standby, you can also initiate voice dialling, voice 
profiles and voice control of sound recordings by:
 Pressing and holding a volume key.
 Pressing the handsfree button (when using a  portable handsfree or a  Bluetooth...

This
 is the Internet version 
of the users gui
de. © Pr
int on
ly for private us
e.
Calling 33
To answer a call using voice commands
When the phone rings, say “Answer”.
The call is connected.
To reject a call using voice commands
When the phone rings, say “Busy”.
The call is rejected. The caller is diverted to voice mail, 
if turned on, or hears a busy tone.
The magic word
You can record a magic word and use it as a voice 
command to allow total handsfree access to voice 
control. Instead of pressing a...

This
 is the Internet version 
of the users gui
de. © Pr
int on
ly for private us
e.
34 Calling2.Lift the phone to your ear, wait for the tone and 
say the profile command for the required profile. 
The profile command is played back to you and 
the current profile is changed.
Sound recordings
Instead of using the menus, you can record voice 
commands to start or to listen to a recording.
To turn on and record recording commands
1. Scroll to  Settings, Vo i c e  c o n t r o l , Record sound .
2. Select...

This
 is the Internet version 
of the users gui
de. © Pr
int on
ly for private us
e.
Calling 35
Tips when recording and using voice 
commands
If your phone cannot detect speech, one of the 
following might have happened:
 You spoke too softly – try speaking more loudly.
 You held the phone too far away – hold it as you  do during a call.
 The voice command was too short – it should be  around one second long and more than one syllable.
 You spoke too late or too soon – speak immediately  after the...

This
 is the Internet version 
of the users gui
de. © Pr
int on
ly for private us
e.
36 CallingNote: If you subscribe to cost information, you must 
enter your PIN2 to clear the cost or time counter.
Setting the call cost
You can use the Tariff function to specify the price per 
call unit. If you do not specify a price per call unit, the 
number of call units appears.
To enter the price per call unit
1. Scroll to  Calls, Time and cost,  Call costs, Set tariff .
2. Enter your PIN2, 
OK.
3. Select  Change,...

This
 is the Internet version 
of the users gui
de. © Pr
int on
ly for private us
e.
Calling 37
To turn on a call divert
1. Scroll to  Calls, Divert calls .
2. Select a call category and then a divert alternative.
3. Select  Activate .
4. Enter the phone number to which you want your 
calls to be diverted and press 
OK, or retrieve it 
from the Phonebook.
To turn off a call divert, select a divert option and 
select  Cancel .
To check status
Scroll to  Calls, Divert calls.  Select a call type . 
Scroll...

This
 is the Internet version 
of the users gui
de. © Pr
int on
ly for private us
e.
38 CallingHandling two calls
When you have one ongoing call and one call on 
hold, you can do the following:
 Press the joystick and select  Switch calls to switch 
between the two calls.
 Press the joystick, then select  Join calls to join the 
two calls into a conference call.
 Press the joystick, then select  Transfer call, to 
connect the two calls. You are disconnected from 
both calls.
 Press 
END
 CALL
 to end...

This
 is the Internet version 
of the users gui
de. © Pr
int on
ly for private us
e.
Calling 39
Having a private conversation
You can have a private conversation with one of 
the participants and put the other participants on hold.
 Press 
MORE
, then select  Extract part to select the 
participant that you want to talk with.
Select  Join calls  to resume the conference call.
Two voice lines
Your phone may have two voice lines with 
different phone numbers. This may be useful 
if, for example, you want...

This
 is the Internet version 
of the users gui
de. © Pr
int on
ly for private us
e.
40 Calling3.Select  New card .
Enter the card settings (the access number and name 
of the calling card server, and the verification code). 
You get this information from your card provider. 
Select which you want to send first – the number 
that you want to call, or the verification code.
To select a card
1. Scroll to  Calls, Time and cost,  Calling cards, 
My cards .
2. Enter your phone lock code, 
OK.
3. Select a...