Sony Dschx90vb Manual

Note
Note the following points when charging via a computer:
If the product is  connected to a laptop  computer that is  not connected to a power  source, the
laptop  battery level decreases. Do not leave the product connected to a laptop  computer for an
extended period of time.
Do not turn  on/off  or restart the computer,  or wake the computer from sleep mode  when a USB
connection has been  established between the computer and the camera. Doing so may cause a
malfunction. Before  turning on/off  or...

3.  Close the cover.
[11] How  to UsePreparing the cameraCharging the battery pack
Battery life and the number of images that can be
recorded/played back using a battery pack
Screen mode
Shooting  (still images):
Number of images:  approx. 390
Actual shooting (movies):
Battery life: approx. 70 min.
Continuous shooting (movies):
Battery life: approx. 105 min.
Viewing  (still images):
Battery life: approx. 290 min., Number of images:  approx. 5800
Viewfinder mode 

Shooting  (still images):
Number of images:  approx. 360
Actual shooting (movies):
Battery life: approx. 75 min.
Continuous shooting (movies):
Battery life: approx. 115 min.
Note
The above battery life and number of images applies when the battery pack has been fully
charged. The battery life and number of images may decrease depending on the
conditions  of use.
The battery life and number of images that can be recorded  is for shooting under the
following conditions:
The  battery pack is  used at an...

1.  To supply power to the camera during shooting/playback, connect  the camera to the
AC adaptor AC-UD10 (sold separately)  and plug the AC adaptor into a wall outlet  (wall
socket).
Note
You can shoot  or play back images while the supplied AC adaptor is connected to the
camera. However, the camera will turn off when the battery pack is completely
discharged.
If you use the camera while power is supplied from a wall outlet  (wall socket),  make  sure
that the icon (
/) displays on the monitor.
[13] How...

1.  Open  the memory card  cover.
2.  Insert  the memory card.
Ensure that the notched corner is facing in the correct direction.
With the notched corner facing in the direction illustrated, insert  the memory card
until it clicks  into place.
3 .  Close the memory card  cover.
Hint
When you use a memory card  with this product for the first time, it is recommended that
you format the card  using the product for stable performance of the memory card. 

[15] How  to UsePreparing the cameraInserting a memory card  (sold separately)
Removing the memory card
How  to remove the memory card1.  Open  the memory card  cover.
2 .  Make  sure  that the access lamp (A)  is not lit.
3.  Push in on the memory card  once to remove it.
4.  Close the memory card  cover.
[16] How  to UsePreparing the cameraSetting the language, date  and time
Setting language, date and time 

When you turn on the camera for the first time or after  you have initialized the functions, the
setting  screen  for language, date  and time will appear.1.  Turn on the camera.
The language setting  screen  will appear and then  setting  screen  for date  and time will
appear.
2 .  Select your  language, and then  press  
.
3 .  Check that [Enter]  is selected on the screen, then  press  
 on the control  wheel.
4 .  Select your  desired geographic  location, and then  press  
.
5 .  Select a setting...

You can select setting  items by turning or pressing the top/bottom/right/left side of the control
wheel. Your selection  is determined  when you press  
 on the center of the control  wheel.
The DISP (Display Setting),
( Exposure Comp. /Photo Creativity ), /(Drive
Mode ), 
( Flash  Mode ) functions  are  assigned  to the top/bottom/left/right sides of the
control  wheel. You can assign selected functions  to the left/right/bottom sides of the control
wheel or to the 
in the center.
During  playback, you...

execute  camera functions  including  shooting, playback, and operation methods.
1.  Press MENU  button to display the Menu  screen.
2.  Select the desired MENU  item using the up/down/left/right side of the control  wheel or
by turning the control  wheel, and then  press  
 in the center of the control  wheel.
The display may move  directly from step 1 to step 3 depending on the [Tile Menu]
setting.
3 .  Select the desired setting  item by pressing the up/down/left/right side on the control
wheel or by...

[20] How  to UseConfirming the operation methodConfirming the operation method
Using the Fn (Function) button
You can register frequently used functions  to the Fn (function) button and recall them while
shooting. Up to 12 frequently used functions  can be registered  to the Fn  (Function)  button.
1 .  Press the DISP  button, and then  press  the Fn  (Function)  button in a screen  mode  other
than   [For viewfinder] .
2.  Select a function  to be registered  by pressing the up/down/left/right side of...