Sony DPP FP85 User Manual

							D:\Printer\DPPFP85.95 series\IM\3285420121DPPFP85.95IM_GB\3285420121\3285420121DPPFP8595IM_GB\050C03.fm
Master: Right
DPP-FP85/FP95 3-285-420-12 (1)
31 GB
Direct printing
x Superimposing a stamp
1Press g/G to select   (Stamp), then 
press ENTER.
The window for selecting a stamp is 
displayed.
2Press g/G/f/F to select a desired 
stamp and press ENTER.
The window used for adjusting the 
stamp is displayed. For how to adjust an 
image, see step 5 on page 27.
3Press g/G to select   and press 
ENTER.
The preview of the superimposed stamp 
on the background image is displayed.
To add multiple stamps
Repeat steps 
2 through 3
4Press PRINT.
To save the image, see page 25.
To superimpose multiple 
handwritten characters or preset 
messages
Press 
g/G to select   (Handwritten 
message) or   (Standard format 
message) and repeat step 3.
1From the   CreativePrint menu 
(page 19), press g/G/f/F to select 
“Frame,” then press ENTER.
The Frame templates are displayed.
2Press g/G/f/F to select the desired 
frame, then press ENTER.
The index view is displayed.
3Press g/G/f/F to select the desired 
image, then press ENTER.
The image adjustment window is 
displayed. For how to adjust an image, see 
step 5 on page 27. 
4Press g/G to select   and press 
ENTER.
The selected image is displayed with the 
selected frame.
5Press PRINT.
To add a stamp, see “Superimposing a 
stamp” on page 31.  
Adding a frame
Continued
Downloaded From ManualsPrinter.com Manuals 
						

							D:\Printer\DPPFP85.95 series\IM\3285420121DPPFP85.95IM_GB\3285420121\3285420121DPPFP8595IM_GB\050C03.fm
Master: Left
DPP-FP85/FP95 3-285-420-12 (1)
32 GB
1From the   CreativePrint menu 
(page 19), press g/G/f/F to select 
“Layout Print,” then press 
ENTER.
The Layout Print templates are displayed.
2Press g/G/f/F to select the desired 
template, then press ENTER.
The preview of the selected template is 
displayed
3Select an image.
When you select a template with multiple 
images, select an image for each area. For 
how to select an image, see step 4 on 
page 26. When you select image(s), the 
window for adjusting the image is 
displayed. 
4Adjust an image.
For how to adjust an image, see step 5 on 
page 27. When you adjust an image, the 
image is added to the image area.
To add a stamp, see “Superimposing a 
stamp” on page 31.  
5Press PRINT.
1From the   CreativePrint menu 
(page 19), press g/G/f/F to select 
“ID Photo,” then press ENTER.
The window used for setting the height 
and width of an ID Photo is displayed.
Tip
You can set a maximum size of 7.0 (width) x 
9.0 (height) cm.
2Press g/G/f/F to select the item 
that you want to adjust, and press 
ENTER.
 To specify the unit: Select the text box at 
the left of the photo frame. You can select 
either “cm” or “inch.”
 To specify the height: Select the figure box 
at the right of the photo frame.
 To specify the width: Select the figure box 
in the upper of the photo frame.
3Press f/F to set the size or unit and 
then press ENTER.
4If you want to specify the other size, 
repeat steps 2 and 3.
5Press g/G/f/F to select   and 
press ENTER.
The window for selecting an image is 
displayed.
Making layout printsMaking an ID photo
Downloaded From ManualsPrinter.com Manuals 
						

							D:\Printer\DPPFP85.95 series\IM\3285420121DPPFP85.95IM_GB\3285420121\3285420121DPPFP8595IM_GB\050C03.fm
Master: Right
DPP-FP85/FP95 3-285-420-12 (1)
33 GB
Direct printing
6Press g/G/f/F to select the desired 
image, and then press ENTER.
The window used for adjusting the image 
is displayed.
You can also set the following adjustment 
items.
For other adjustment items, see step 5 on 
page 27.
7Press g/G to select   and press 
ENTER.
8Press PRINT.
Note
An ID photo print using this printer may not be 
acceptable to be used for an identification card or 
passport. Please check the requirements for the photo 
to be used in the certificate before you submit the card 
or passport.
Performing Batch Print 
(Index Print/DPOF Print/Print All)
 Index Print
You can print a list (index) of all the images 
stored in a memory card or an external 
device, which allows you to check the 
contents of the selected media easily.
The number of split panes on a sheet will be 
calculated automatically. Images are printed 
in each split pane.

You can print all the images stored on a 
memory card or an external device at one 
time.

The images which are DPOF (Digital Print 
Order Format) preset for printing are 
displayed with the print mark ( ) in an 
image preview. You can print those images 
at one time. The images are printed with the 
preset number of copies in the order they 
were displayed.
Notes
 For how to preset images for printing, see the 
manual of your digital camera.
 Some types of digital cameras do not support the 
DPOF function, or the printer may not support 
some of the functions of the digital camera.
Items Procedures
Adjust the picture quality 
of an image. (page 22)
Displays the window to 
correct red-eye 
phenomenon. (page 24)
Makes an image into 
monochrome pictures. 
(page 22)
Continued
Downloaded From ManualsPrinter.com Manuals 
						

							D:\Printer\DPPFP85.95 series\IM\3285420121DPPFP85.95IM_GB\3285420121\3285420121DPPFP8595IM_GB\050C03.fm
Master: Left
DPP-FP85/FP95 3-285-420-12 (1)
34 GB
1From the menu, select   (Batch 
Print) and then press ENTER.
The Batch Print menu is displayed.
2Press f/F to select “Index Print,” 
“DPOF Print,” or “Print All” and then 
press ENTER.
The confirmation dialog box is displayed.
Note
If there are no DPOF preset images when you 
select “DPOF Print,” an error message will be 
displayed.
3Press g/G to select “Yes” to start 
printing or “No” to cancel printing, 
and then press ENTER.
When you select “Yes” printing starts. 
Viewing a slideshow
1From the menu, press g/G to select 
 (Slideshow) and then press 
ENTER.
The Slideshow menu is displayed.
2Press f/F to select “Switch,” and 
then press ENTER.
The window used to specify the way 
images are switched is displayed.
3Press f/F to select “Execute,” and 
press ENTER.
The slideshow starts.
Showing the slideshow
Items  Procedures
Manual Press g/G to switch 
images.
Auto1 
SimpleThe images are displayed 
automatically one after 
another in the order of the 
index view.
Auto2 
Creative*The “CreativePrint” 
images or edited images 
with filters are displayed 
automatically, at random.
*: Factory settings
Downloaded From ManualsPrinter.com Manuals 
						

							D:\Printer\DPPFP85.95 series\IM\3285420121DPPFP85.95IM_GB\3285420121\3285420121DPPFP8595IM_GB\050C03.fm
Master: Right
DPP-FP85/FP95 3-285-420-12 (1)
35 GB
Direct printing
During a slideshow, press ENTER and the 
displayed image will be reserved to be printed. 
If you have selected the “Auto2 Creative” 
switch option, you cannot reserve an image for 
printing. 
To stop a slideshow
Press CANCEL.
Note
Depending on the image, it may take time to be 
displayed.
During a slideshow, press PRINT.
The print preview of the displayed image will 
appear. 
When an image is reserved to be printed, you 
can check the print preview by pressing g/G.
Press PRINT again so that printing starts.
After printing is completed, slideshow 
resumes.
File operations
You can copy memory card images to another 
memory card or an external device connected 
to the PictBridge/EXT INTERFACE 
connector.
1From the menu, press g/G to select 
 (File operation) and then press 
ENTER.
The File operation menu is displayed 
(page 19).
2Press f/F to select “Copy all files” 
or “Copy selected files” and press 
ENTER.
 When “Copy all files“is selected, skip 
to step 5.
 When “Copy selected files” is selected, 
the index view of the memory card or 
external device is displayed.
3Press g/G/f/F to select the desired 
image and press ENTER.
To copy multiple images, repeat this step.
To cancel the selection
Press g/G/f/F to select the image you 
want to cancel, and press ENTER again.
4Press MENU.
The dialog box to select the destination is 
displayed.
Reserving printing
Printing 
Copying images
Continued
Downloaded From ManualsPrinter.com Manuals 
						

							D:\Printer\DPPFP85.95 series\IM\3285420121DPPFP85.95IM_GB\3285420121\3285420121DPPFP8595IM_GB\050C03.fm
Master: Left
DPP-FP85/FP95 3-285-420-12 (1)
36 GB
5Press f/F to select “Memory Stick,”  
“CompactFlash”, “SD Card,” “xD-
Picture Card” or “External Device,” 
and press ENTER.
Tip
When you select “External Device,” a dialog 
box for selecting a drive may be displayed. 
Follow the instructions on the screen to select 
the destination drive.
Note
You cannot copy an image onto the same 
memory card or external device containing the 
image to be copied.
6Press f/F to select the desired 
folder and press ENTER.
The selected images are copied to the 
destination folder.
Tips
 You can select a folder number of the destination. 
If there is no such file at the destination, a new 
folder is created.
 To exit the File operation menu midway, press 
CANCEL.
Note
While copying images, do not turn off the printer or 
remove the memory card or external device from the 
printer. The printer, memory card, or USB external 
device may be damaged or the data may be lost.
You can select and delete images stored on a 
memory card.
1From the menu, press g/G to select 
 (File operation) and then press 
ENTER.
The File operation menu is displayed 
(page 19).
2Press f/F to select “Delete Image” 
and press ENTER.
The index view is displayed.
3Press g/G/f/F to move the trash 
icon to the image you want to 
delete, then press ENTER.
To delete multiple images, repeat this 
step.
To cancel the selection
Press g/G/f/F to select the image you 
want to cancel, and press ENTER again.
4Press MENU.
A confirmation dialog box is displayed.
5Press g/G to select “OK” and press 
ENTER.
The selected images are deleted.
Deleting selected images
Trash icon
Downloaded From ManualsPrinter.com Manuals 
						

							D:\Printer\DPPFP85.95 series\IM\3285420121DPPFP85.95IM_GB\3285420121\3285420121DPPFP8595IM_GB\050C03.fm
Master: Right
DPP-FP85/FP95 3-285-420-12 (1)
37 GB
Direct printing
Tip
To exit the File operation menu, press CANCEL.
Notes
 During the deletion, do not turn off the printer or 
remove the memory card. The printer or the 
memory card may be damaged. Or the data may be 
lost.
 An image, once deleted, will be lost forever. 
 When you delete an image with an associated file 
indication ( ), the associated motion picture file 
or e-mail file will be also deleted.
 You cannot delete a protected image with the 
protect indication ( ) or a DPOF preset 
indication ( ) displayed. To delete them, use 
your digital camera. For the details, see the 
operating instruction of the digital camera.You can format a “Memory Stick.” 
1From the menu, press g/G to select 
 (File operation) and then press 
ENTER.
The File operation menu is displayed 
(page 19).
2Press f/F to select “Memory Stick 
Format” and press ENTER.
The confirmation dialog box is displayed.
3Press g/G to select “OK” and press 
ENTER.
The “Memory Stick” is formatted.
Notes
 When you format a 
“Memory Stick,” all the 
images on it are deleted.
 During formatting, do not turn off the printer or 
remove the memory card. The printer or the 
memory card may be damaged. Or the image may 
be lost.
 You cannot format a memory card other than a 
“Memory Stick” or an external device such as a 
USB memory.
Formatting a “Memory Stick”
Downloaded From ManualsPrinter.com Manuals 
						

							D:\Printer\DPPFP85.95 series\IM\3285420121DPPFP85.95IM_GB\3285420121\3285420121DPPFP8595IM_GB\050C03.fm
Master: Left
DPP-FP85/FP95 3-285-420-12 (1)
38 GB
Changing the Print 
setup
1From the menu, press g/G to select 
 (Print setup) and then press 
ENTER.
The Print setup menu is displayed.
Note
During the “CreativePrint” operations, you 
cannot select the items except for “Color 
Setting.” (Setting items which cannot be 
selected and changed are displayed in gray.)
2Press f/F to select the desired 
setting item, and press ENTER.
The setting window for the selected item 
is displayed.
3Press f/F to select the desired 
setting and press ENTER.
The setting is fixed.
Tip
To exit the Print setup menu, press MENU.
Downloaded From ManualsPrinter.com Manuals 
						

							D:\Printer\DPPFP85.95 series\IM\3285420121DPPFP85.95IM_GB\3285420121\3285420121DPPFP8595IM_GB\050C03.fm
Master: Right
DPP-FP85/FP95 3-285-420-12 (1)
39 GB
Direct printing
Item Settings Contents
Date Print Date/Time, Date Prints an image with the date and time of shooting when 
the image is recorded according to the DCF (Design rule 
for Camera File system) format and the date and time of 
shooting is recorded as part of shooting information. You 
can select “Date” or “Date/Time.”
When the image is edited on the printer, the date and time 
you input in saving an image is printed.
Off* Prints an image without the date and time.
Borders Pattern 1/Pattern 2 Prints an image with borders around the image. To print 
an image without being cut, select “Pattern 1.” To leave 
almost-equal borders in the top, bottom, right and left 
around an image, select “Pattern 2.”
NoteWhen you select “Pattern 2,” the top and bottom edges or right 
and left edges may be trimmed and printed depending on the 
image.
Borderless* Prints an image without blank space around the image.
NoteWhen printing a standard 4:3 picture shot by a digital camera, 
the top and bottom edges of the image are cut and it is printed 
as a 3:2 picture.
AUTO TOUCH-
UP SettingYou can specify the correction level each for the following elements when the 
AUTO TOUCH-UP button is pressed. You can select “Off,” “Standard*,” 
“Strong.” (For “Red-eye Correction,” you can select “On*” or “Off.”
 Skin Smoothing: The skin status is automatically recognized and adjusted 
to its optimum status.
 Exposure Correction: The brightness is adjusted by using the face 
recognition features.
 Focus Correction: Off-focus image will be adjusted to on-focus image.
 Red-eye Correction: Reduces the red-eye phenomenon shot by flash. 
*: Factory settings
Pattern 1 Pattern 2 Borderless
Continued
Downloaded From ManualsPrinter.com Manuals 
						

							D:\Printer\DPPFP85.95 series\IM\3285420121DPPFP85.95IM_GB\3285420121\3285420121DPPFP8595IM_GB\050C03.fm
Master: Left
DPP-FP85/FP95 3-285-420-12 (1)
40 GB
Auto Fine Print5 Photographic*/
VividThe function automatically corrects the picture quality so 
that an image may be printed in more vivid, clear and 
beautiful pictures. It is especially effective for a darker 
image with low contrast. The pictures are corrected to 
reproduce natural skin colors, vivid tree leaf green, or 
clear sky blue.
 Photographic: Adjusts an image automatically so that 
the image is printed with natural and beautiful pictures. 
(Recommended)
 Vivid: Adjusts an image automatically so that the 
image is printed with stronger sharpness correction and 
more vivid pictures than the Photographic mode.
TipFor the images shot by an Exif Print (Exif 2.21)-compliant 
digital camera, they are adjusted to their optimum picture 
quality.
Notes
 The original image data is not corrected.
 When printing in PC mode, the Auto Fine Print5 setting with 
the printer driver has priority over the setting here. In the 
PictBridge mode, this setting holds effective.
Off Prints an image without any corrections.
Pages Per Sheet 4-split/9-split/
16-splitPrints the specified numbers of split screens, with each 
screen an image is placed. 
Off* Prints an image without split screens.
Color Setting Adjusts the colors and sharpness of a print. Press g/G to select a color element 
( “R” (red), “G“ (green), or “B” (blue)) or “S” (Sharpness), and then press f/F 
to set the level. You can set the levels for R, G, B in the range from +4 to –4 
and for S in the range from +7 to 0.
R:Adjusts the red and blue elements. The higher you set the level, the more 
reddish the picture becomes as if it receives red light. The lower you set 
the level, the darker the picture becomes as if light blue is added.
G:Adjusts the green and purple elements. The higher you set the level, the 
more greenish the picture becomes as if it receives green light. The lower 
you set the level, the darker the picture becomes as if red purple is added.
B:Adjusts the blue and yellow elements. The higher you set the level, the 
more bluish the picture becomes as if it receives blue light. The lower you 
set the level, the darker the picture becomes as if yellow is added.
S:The higher you set the level, the more distinct the outlines become.
(*R: 0/G:0/B:0/S:0)
*: Factory settings Item Settings Contents
Downloaded From ManualsPrinter.com Manuals