Sony DPP FP65 User Manual

							21 GB
Direct printing
Editing an image
1From the   Edit menu (page 19), 
press g/G to select   (Enlarge) to 
enlarge an image or   (Reduce) 
to reduce it, and then press ENTER.
Each time you press the button, the image 
becomes larger or smaller. You can also 
use the   (zoom in) and    (zoom out) 
buttons to enlarge or reduce the image 
size:
 : up to 200%
 : down to 60%
Note
The picture quality of an enlarged image may 
deteriorate depending on its size.
1From the   Edit menu (page 19), 
press g/G to select   (Move) and 
then press ENTER.
The g/G/f/F indicators appear on the 
left/right/above/below the image and you 
can move the image.
2Press  g/G/f/F to move an image.
The image moves in the selected direction.
3Press ENTER.
The image is fixed in its current position.
4Press PRINT.
1From the   Edit menu (page 19), 
press g/G to select    (Rotate) and 
then press ENTER.
 Each time you press ENTER, the image 
rotates 90° clockwise.
2Press PRINT.
1From the   Edit menu (page 19), 
press g/G to select    (Adjust) and 
then press ENTER.
The Adjust menu is displayed.
2Press g/G to select the desired 
adjustment tool and press ENTER.
The adjustment screen of the selected tool 
appears.
Enlarging and reducing an 
image size 
Moving an image 
Rotating an image 
Adjusting an image
Icons Meaning
BrightnessAdjusting the Brightness
TintAdjusting the Tint 
SaturationAdjusting the Saturation
SharpnessAdjusting the Sharpness
Exiting the Adjust menu.
Saves and reflects the 
editions made and returns to 
the previous step.
Continued
Downloaded From ManualsPrinter.com Manuals 
						

							22 GB
       When   (Brightness) is selected
Press g/G to adjust an image while 
checking the level of brightness, for 
example.
Brightness: Press G to brighten the 
picture or g to darken it.
Tint: Press G to make the picture 
greenish or g to make it reddish.
Saturation: Press G to deepen the 
colors or g to lighten the colors.
Sharpness: Press G to sharpen the 
outlines or g to soften them.
3Press ENTER.
The adjustment is executed and you can 
select other adjustment option.
4Press g/G to select  (Exit) and 
then press ENTER.
The Adjust menu will be closed.
5Press PRINT.
1Press g/G to select   (Print) and 
then press  ENTER. Or, press 
PRINT.
The print window is displayed. The print 
quantity is displayed.
2Set the print quantity.
 To increase the print quantity one by 
one, press f repeatedly.
 To reduce the print quantity one by one, 
press F briefly repeatedly.
3Press ENTER.
1Press g/G to select  (Reset) and 
then press ENTER.
The confirmation window is displayed.
2Press f/F to select “OK”, and press 
ENTER.
The settings in the Edit menu and Red-eye 
Correction are disabled, and the image is 
reset to the state it was in before editing. 
The Edit screen or Adjust screen is 
displayed again. If you press CANCEL or 
select “CANCEL” and press ENTER, the 
previous window is displayed.
                      Slider
Printing an edited image 
Undoing the operations 
Downloaded From ManualsPrinter.com Manuals 
						

							23 GB
Direct printing1Press g/G to select  (Exit) and 
then press ENTER.
The confirmation window is displayed.
2Press f/F to select “OK”, and press 
ENTER.
The menu operations are terminated and 
the window displayed before entering the  
menu is displayed again. 
If you press CANCEL or select 
“CANCEL” and press ENTER, the 
previous window is displayed.
Making layout prints 
1From the main menu (page 18), 
press g/G/f/F to select   
(Layout Print), then press ENTER.
The Layout Print templates are displayed.
2Press g/G/f/F to select the desired 
template, then press ENTER.
The preview of the selected template is 
displayed
3Select an image.
When you select a template with multiple 
images, repeat the procedures below to 
select an image for each area.
1Press g/G/f/F to select an image area, 
then press ENTER.
The image list is displayed.
2Press g/G/f/F to select the desired 
image, then press ENTER.
The window used for adjusting the 
image is displayed.
For adjustment, see “Adjusting an 
image” on page 21. 
You can adjust red-eye phenomenon 
automatically by pressing the   
(Red-eye Correction) button (page 20). 
After the Red-eye Correction is 
performed, you cannot do other 
adjustments. Make sure to perform the 
Red-eye Correction after you finish 
other adjustments.
4Press g/G to select   and press 
ENTER.
The selected image is added to the image 
area.
5Press PRINT.
Exiting the menu 
Continued
Downloaded From ManualsPrinter.com Manuals 
						

							24 GB
Making an ID photo 
1From the main menu (page 18), 
press g/G/f/F to select   (ID 
Photo) and then press ENTER.
The window used for setting the height 
and width of an ID Photo is displayed.
Tip
You can set a maximum size of 7.0 (width) x 
9.0 (height) cm.
2Press g/G/f/F to select “Height” or 
“Width” to be adjusted and press 
ENTER.
The cursor moves to the number input 
area of the selected item.
 To specify the unit: Select either “cm” or 
“inch”.
 To specify the height: Select the figure box 
at the right of the photo frame.
 To specify the width: Select the figure box 
in the upper of the photo frame.
3Press f/F to set the size and then 
press ENTER.
The ID photo preview of the specified size 
is displayed.
4If you want to specify another  size, 
repeat steps 2 and 3.
5Press f/F to select   and press 
ENTER.
The window used for selecting an image is 
displayed.
6Press g/G/f/F to select the desired 
image, and then press ENTER.
The window used for adjusting the image 
position is displayed.
For adjustment, see step “Adjusting an 
image” on page 21.
You can also change a color photo into a 
monochrome one.  Select   
(Monochrome) and press ENTER. You 
can select this option while making an ID 
Photo.
7Press g/G to select   and press 
ENTER.
A preview of the ID photo print is 
displayed.
8Press PRINT.
Note
An ID photo printed may not be able to be acceptable  
for use in an identification card or passport. Please 
check the requirements for the photo to be used in the 
instructions before you submit the card or passport.
Downloaded From ManualsPrinter.com Manuals 
						

							25 GB
Direct printing
Making Batch Print  
(Index Print/DPOF Print/Print All)
 Index Print
You can print a list (index) of all the images 
stored in a memory card or a USB memory, 
which allows you to check the contents of 
the selected media easily.
The number of split panes on a sheet is fixed 
to 8 horizontally by 6 vertically.

You can print all the images stored on a 
memory card or a USB memory at one time.
 DPOF Print
The images which are DPOF (Digital Print 
Order Format) preset for printing are 
displayed with the print mark ( ) in an 
image preview. You can print those images 
at one time. The images are printed with the 
preset number of copies in the order they 
were displayed.
Notes
 For how to preset images for printing, see the 
manual of your digital camera.
 Some types of digital cameras do not support the 
DPOF function, or the printer may not support 
some of the functions of the digital camera.
1From the main menu (page 18), 
press g/G/f/F to select   (Batch 
Print) and then press ENTER.
The Batch Print menu is displayed.
2Press g/G to select   (Index 
Print),    (Print All), or   (DPOF 
Print)  and then press ENTER.
The confirmation dialog box is displayed.
Note
If there are no DPOF preset images when you 
selected “DPOF Print”,  an error message will 
be displayed.
3To start printing, press f/F to select 
“OK” and press ENTER.
When you select “OK” printing starts. 
Tips
 To stop printing, press CANCEL and press 
ENTER in step 3. 
 When the “Date Print” item of the Print setup 
menu is set to “ON”, the date the image was shot 
or saved is not printed in the Index Print mode.
Downloaded From ManualsPrinter.com Manuals 
						

							26 GB
Changing the settings 
When the image is recorded using the DCF 
(Design rule for  Camera File system) format, 
you can print an image with  the date of 
shooting that is recorded as part of shooting 
information. You can select “ON” or “OFF” of 
Date Print and the order of year/month/day.
1From the   (Print setup) menu, 
press g/G/f/F to select   (Date 
Print) and then press ENTER.
The Print setup menu is displayed.
2Press g/G to select   (Date Print) 
or   (no Date Print) , and press 
ENTER.
3To set the order of the date print, 
press F to select  ,  and 
then press g/G to select the desired 
order:
 D-M-Y: The date is displayed in the 
order of day, month and year.
 M-D-Y: The date is displayed in the 
order of month, day and year.
 Y-M-D: The date is displayed in the 
order of year, month and day.
4Press ENTER.
The setting is fixed. The Print setup 
window is displayed again.
To redo the operations
Press CANCEL. The Print setup window is 
displayed again.
1From the   (Print setup) menu, 
press g/G/f/F to select   
(Borders/Borderless Print) and then 
press ENTER.
The Borders/Borderless Print menu is 
displayed.
Setting the Date Print   
Setting the print finish  
(Borders/Borderless print)
Downloaded From ManualsPrinter.com Manuals 
						

							27 GB
Direct printing
2Press g/G to select the desired print 
finish.
3Press ENTER.
The setting is fixed. The Print setup 
window is displayed again.
To redo the operations
Press CANCEL. The Print setup window is 
displayed again.
Notes
 When you select “Borderless”, a standard 4:3 
picture shot by a digital camera may be printed 
with the top and bottom edges cut and it is printed 
as a 3:2 picture.
 When you select “Borders (Pattern 2)”, the top and 
bottom edges or right and left edges may be 
trimmed and printed depending on the image.
1From the   (Print setup) menu, 
press g/G/f/F to select   (On-
screen Display) and then press 
ENTER.
The On-screen Display menu is displayed.
2Press g/G to select the desired 
setting item.
Items Procedures
Borderless
: Prints an image 
without blank space around 
the image. 
Borders (Pattern 1): Prints 
an image with borders 
around the image, without 
cutting the image. 
Borders (Pattern 2): Prints 
an image while leaving 
almost-equal borders in the 
top, bottom, right and left 
around the image. 
Setting the On-screen Display 
Items Procedures
On-screen Display is off. 
In an image preview, 
information other than the 
print quantity and input 
setting is not displayed.
On-screen Display is on. In 
an image preview, 
information such as the 
number of selected images, 
shot date, and the details of 
an image file will be 
displayed in addition to the 
print quantity setting and 
input setting.
Continued
Downloaded From ManualsPrinter.com Manuals 
						

							28 GB
3Press ENTER.
The setting is fixed. The Print setup 
window is displayed again.
To redo the operations
Press CANCEL. The Print setup window is 
displayed again.
Tip
The year, month and day of the shot date are 
displayed in the same order as the Date Print setting.
1From the   (Print setup) menu, 
press g/G/f/F to select   (Color 
Setting) and then press ENTER.
The Color Setting menu is displayed.
2Press g/G to select the desired 
color element, and press f/F to set 
the level.
You can set the levels for a color element:  
“R” (red), “G” (green) or “B” (blue) in the 
range from +4 to –4.
R: Adjusts the red and blue elements. The 
higher you set the level, the more 
reddish the picture becomes as if it is 
subjected to red light. The lower you 
set the level, the darker the picture 
becomes, as if light blue is added.
G: Adjusts the green and purple elements. 
The higher you set the level, the more 
greenish the picture becomes as if it is 
subjected to green light. The lower you 
set the level, the darker the picture 
becomes, as if reddish purple is added.
B: Adjusts the blue and yellow elements. 
The higher you set the level, the more 
bluish the picture becomes as if it is 
subjected to blue light. The lower you 
set the level, the darker the picture 
becomes, as if yellow is added.
Changing the Color Setting  
Downloaded From ManualsPrinter.com Manuals 
						

							29 GB
Direct printing
3Press ENTER.
The setting is fixed. The Print setup 
window is displayed again.
To redo the operations
Press CANCEL. The Print setup window is 
displayed again.
1From the   (Print setup) menu, 
press g/G/f/F to select   
(Printer information display) and 
then press ENTER.
The Printer information display menu is 
displayed. You can check the version 
number and total print quantity of the 
printer.
2Press ENTER.
The Printer information display window is 
closed.You can reset all the settings to the default 
settings.
1From the   (Print setup) menu, 
press g/G/f/F to select   
(Default Setting) and then press 
ENTER.
The confirmation window is displayed.
2Press f/F to select “OK” and press 
ENTER.
The printer settings are reset to their  
default settings.
 
Hiding or showing the Printer 
information display 
Resetting to the Default 
Setting  
Downloaded From ManualsPrinter.com Manuals 
						

							30 GB
Printing from a USB 
memory
You can connect a USB memory and the 
printer, and print an image directly from the 
USB memory.
Notes
 We cannot guarantee connection with all types of 
USB memory.
 We cannot guarantee connection with a mass 
storage-compliant digital camera or photo storage.
 If a memory card is inserted in the printer, the 
printer cannot read the signal from a USB memory 
connected to the PictBridge/EXT INTERFACE 
connector of the printer. Remove the memory card, 
if any.
1Connect the printer to the AC power 
source (page 12).
2Press the 1 (on/standby) button to 
turn on the printer.
3Connect a USB memory into the 
PictBridge/EXT INTERFACE 
connector of the printer.
Notes
 While the access indicator of a USB memory is 
flashing, never turn off the power of the printer.  
The data stored in the USB memory may be 
damaged. We cannot compensate for any damages 
that may be caused by data loss or damage.
 You cannot use a USB hub or a USB device 
equipped with a USB hub.
 Encoded or compressed data by fingerprint 
authentication or password cannot be used.
To PictBridge/EXT 
INTERFACE connector
USB Memory
Downloaded From ManualsPrinter.com Manuals