Home > Sony > Camcorder > Sony Digital Camcorder DSR PD170 Operating Instructions

Sony Digital Camcorder DSR PD170 Operating Instructions

Here you can view all the pages of manual Sony Digital Camcorder DSR PD170 Operating Instructions. The Sony manuals for Camcorder are available online for free. You can easily download all the documents as PDF.

Page 81

Editing
81
Using with an analog video unit and a PC
– Signal convert function
You can convert the analog input signal to the digital signal and output\
 it from the DV
Interface on this camcorder. You can capture images and sound from an an\
alog video
unit connecting a PC which has i.LINK (IEEE1394) connector to your cam\
corder.
(1 )Set the POWER switch to VCR.
( 2 )Press MENU to display the menu.
( 3 )Turn the SEL/PUSH EXEC dial to select 
, then press the dial.
( 4 )Turn the SEL/PUSH EXEC dial to...

Page 82

82
Recording video or TV programs
Using the A/V connecting cableYou can record a tape from another VCR or a TV program from a TV that ha\
s video/
audio outputs. Use your camcorder as a recorder.
(1 ) Insert a blank tape (or a tape you want to record over) into your camc\
order. If
you want to record a tape from the VCR, insert a recorded tape into the \
VCR.
( 2 ) Set the POWER switch to VCR on your camcorder.
( 3 ) Set DISPLAY in 
 to LCD in the menu settings (p. 105).
( 4 ) Press MENU to erase the...

Page 83

Editing
83
Recording video or TV programs
If your VCR is a monaural type
Connect with a VCR using the audio cable (monaural y stereo) (optional).
Connect using an S video cable (optional) to obtain high-quality pictu\
res
With this connection, you do not need to connect the yellow (video) pl\
ug of the A/V
connecting cable.
Connect an S video cable (optional) to the S video jacks of both your \
camcorder and the
VCR.
This connection produces higher quality DVCAM/DV format pictures.
If you do various...

Page 84

84
Recording video or TV programs
Using an i.LINK cableSimply connect the i.LINK cable (optional) to  DV Interface and to DV Interface of the
DV products. With digital-to-digital connection, video and audio signals\
 are
transmitted in digital form for high-quality editing.
( 1 ) Insert a blank tape (or a tape you want to record over) into your camc\
order,
and insert the recorded tape into the VCR.
( 2 ) Set the POWER switch to VCR.
( 3 ) Set DISPLAY in 
 to LCD in the menu settings (p. 105).
( 4 )...

Page 85

Editing
85
Recording video or TV programs
You can connect only one VCR using the i.LINK cable
When you dub a picture in digital form
The color of the display may be uneven. However this does not affect the\
 dubbed
picture.
If you record a still picture in playback pause mode via the 
 DV Interface
The recorded picture becomes rough. And when you play back the picture u\
sing your
camcorder, the picture may jitter.
Before recording
Press DISPLAY and make sure that the DV IN indicator appears on the LCD \...

Page 86

86
Audio dubbing
You can record an audio sound to add to the original sound on a tape by \
connecting
audio equipment or a microphone. If you connect audio equipment, you can\
 add sound
to your recorded tape by specifying the starting and ending points. The \
original sound
will not be erased. You can also use the Remote Commander for this opera\
tion.
The relationship between audio input and channels on which a
dubbed sound will be recorded
The relationship between audio input and channels on which a...

Page 87

Editing
87
Dubbing with the AUDIO CH1/CH2 jacks
Notes
•You can dub a sound only on a tape recorded in Fs32K mode of the DVCAM f\
ormat.
• When dubbing with the INPUT1/INPUT2 connectors, you can check the record\
ed
picture on the LCD screen, in the viewfinder, or on the screen of equipm\
ent connected
with the VIDEO jack, and you can check the recorded sound by using headp\
hones.
• When dubbing with the AUDIO CH1/CH2 jacks, you can check the recorded pi\
cture
on the LCD screen or in the viewfinder, and...

Page 88

88
Audio dubbing
Adding an audio sound on a recorded tape
(1 ) Insert the recorded tape into your camcorder.
( 2 ) Set the POWER switch to VCR on your camcorder.
( 3 ) Locate the recording start point by pressing  N. Then press  X at the point
where you want to start recording to set your camcorder to the playback \
pause
mode.
( 4 ) Press 
AUDIO DUB. The green X  indicator appears on the LCD screen or
in the viewfinder.
( 5 ) Press  X and start playing back the audio you want to record at the same...

Page 89

Editing
89
Notes
•New sound cannot be recorded on a tape already recorded in Fs48K mode (\
p. 110).
• New sound cannot be recorded on a tape already recorded in the DV format\
.
• You cannot add audio with the 
 DV Interface.
If you make all the connections
The audio input to be recorded will take precedence over others in the f\
ollowing order.
• AUDIO CH1/CH2 jacks
• INPUT1/INPUT2 connectors
If an i.LINK cable (optional) is connected to your camcorder
You cannot add sound to a recorded tape.
If you set...

Page 90

90
Setting time values
The camcorder uses two types of time values: time code values and user b\
its.
The time value is displayed on the LCD screen, in the viewfinder, or on \
the display
window. The time code and user bits can be set only in DVCAM mode.
The user bits are convenient when using multiple cameras at the same eve\
nt.
When you record the picture, time code data will be recorded automatical\
ly.
Setting the time code value
This section describes the steps for setting time code recording...
Start reading Sony Digital Camcorder DSR PD170 Operating Instructions

Related Manuals for Sony Digital Camcorder DSR PD170 Operating Instructions

All Sony manuals