Sony Dav Sb200 Operating Instructions
Here you can view all the pages of manual Sony Dav Sb200 Operating Instructions. The Sony manuals for Home Theater System are available online for free. You can easily download all the documents as PDF.
Page 31
OPERATION 31 Radio Operation Presetting the Radio stations You can preset 30 stations for FM and AM (MW). Before tuning, make sure that you have turned down the vol- ume. 1 1 Press TUNER/BAND on the remote control until FM or AM (MW) appears in the display window. 2 2 And then every time you press TUNER/BAND, FM and AM (MW) changes alternately. 3 3 Press and hold TUNING - or + on the remote control for about two seconds until the frequency indication starts to change, then release. Scanning stops when...
Page 32
32 Radio Operation (Continued) RDS Operation This unit is equipped with RDS (Radio Data System), which brings a wide range of information to FM radio. Now in use in many countries, RDS is a system for transmitting station call signs or network information, a description of station programme type text message about the station or specifics of musical selection and the correct time. RDS Tuning When a FM station is tuned in and it contains RDS data, the unit will automatically display the station’s name in...
Page 33
OPERATION 33 Controlling the TV with the Supplied Remote You can control the sound level, input source, and power switch of your TV with the supplied remote.Controlling the TV You can control your TV using the buttons below. By pressing You can TV @ / 1 Tu r n the TV on or off. TV/VIDEO Switch the TV’s input source between the TV and other input sources. TV CH +/- Scans up or down through memorized channels. TV VOL +/- Adjust the volume of the TV. Using the number buttons for controlling the TV When...
Page 34
34 Using the SONY TV DIRECT Function SONY TV DIRECT allows you to turn on your SONY TV and this system, change the system mode to “CD/DVD,” and then switch the TV’s input source you set with one button push.By pressing Number TV’s input source TV/VIDEO 0 No input source (Default) 1VIDEO1 2VIDEO2 3VIDEO3 4VIDEO4 5VIDEO5 6VIDEO6 7COMPONENT 1 INPUT 8COMPONENT 2 INPUT 2 Press and hold TV CH + while entering the code for transmit time (see table below) using the number buttons. The transmit time from the...
Page 35
REFERENCE 35 Language Code List Enter the appropriate code number for the initial settings “Disc Audio”, “Disc Subtitle” and/or “Disc Menu” (See page 19). Code Language 6566 Abkhazian 6565 Afar 6570 Afrikaans 8381 Albanian 6577 Ameharic 6582 Arabic 7289 Armenian 6583 Assamese 6588 Aymara 6590 Azerbaijani 6665 Bashkir 6985 Basque 6678 Bengali; Bangla 6890 Bhutani 6672 Bihari 6682 Breton 6671 Bulgarian 7789 Burmese 6669 Byelorussian 7577 Cambodian 6765 Catalan 9072 Chinese 6779 Corsican 7282 Croatian 6783...
Page 36
36 Code AreaAD AndorraAE United Arab EmiratesAF AfghanistanAGAntigua and BarbudaAI AnguillaAL AlbaniaAM ArmeniaAN Netherlands AntillesAOAngolaAQAntarcticaAR ArgentinaAS American SamoaATAustriaAUAustraliaAW ArubaAZ AzerbaidjanBA Bosnia-HerzegovinaBB BarbadosBD BangladeshBE BelgiumBF Burkina FasoBG BulgariaBH BahrainBI BurundiBJ BeninBM BermudaBN Brunei DarussalamBO BoliviaBR BrazilBS BahamasBT BhutanBV Bouvet IslandBW BotswanaBY BelarusBZ BelizeCA CanadaCC Cocos (Keeling) IslandsCF Central African...
Page 37
REFERENCE 37 Troubleshooting Check the following guide for the possible cause of a problem before contacting service. Symptom No power. The power is on, but the DVD Receiver does not work. No picture. There is no sound or only a very low-level sound is heard. The playback picture is poor. The DVD Receiver does not start playback. Loud hum or noise is heard.Cause •The power cord is disconnected. •No disc is inserted. •The TV is not set to receive DVD signal output. •The video cable is not connected...
Page 38
38 Troubleshooting (Continued) Symptom Radio stations cannot be tuned in. The remote control does not work properly. The sound mode or Pro Logic II mode cannot be changed. The front panel display is too dim.Cause •The antenna is positioned or connected poorly. •The signal strength of the stations is too weak (when tuning in with automatic tuning). •No stations have been preset or preset stations have been cleared (when tuning by scanning preset stations). •The remote control is not pointed at the...
Page 39
REFERENCE 39 Power supply 220-240V AC, 50/60Hz Power consumption 100W, No more than 1 W (220-240V AC) (at the power saving mode) Mass 4.9 kg External dimensions (W x H x D) 430 x 70 x 370 mm Operating conditions Temperature: 5°C to 35°C, Operation status: Horizontal Operating humidity 5% to 85% Laser Semiconductor laser, wavelength 650 nm for VCD and DVD, wavelength 780 nm for CD Emission duration Continuous Signal system PAL, NTSC Frequency response (audio) 2 Hz ~ 20 kHz (±1.0 dB) Signal-to-noise ratio...